HONDA KTUNER V1 USER Board is released and available with new features!
Today our KTunerECU In-ECU hardware for RSX/Swaps/EP3, 03-07 Accord i4, Euro-R Accord CL7/CL9, TSX, and 05-06 Element gets a much anticipated refresh. Our revision 1 hardware for K24 and K20 ECU tuning includes:
The RSX/EP3/Swap platform will be the first to receive access to flex fuel support. All other In-ECU platforms will receive updates to add this feature-set soon.
There is a new, exciting tuning system for factory and swapped K-series cars. Ktuner is based on the 05-06 RSX platform but is adaptable to a variety of other applications through the use of different ecus and/or an adapter harness. KTuner allows full tuning of ignition, fuel, cam angle, and additional supporting parameters. Paired with essential datalogging parameters at high speeds, KTuner can be utilized to tune your application properly. KTuner also has custom developed features that can help you achieve your tuning goals beyond the factory capabilities.
This Ktuner End User Board comes with a single KTuner hardware unit paired with a single user license for the KTuner software. This unit is locked to one ECU and allows you to alter the settings in your ECU. Full reading, reflashing, and datalogging. KTuner uses direct USB connectivity for fast data transfers. The hardware is capable of logging full data packets at speeds over 600hz!
To use Ktuner in the 02-04 RSX, 02-05 EP3, or a K-series swapped car that is wired in the typical 02-04 RSX fashion, an 05-06 ecu and a specially designed ecu conversion harness are needed. You can also use a newer harness when putting together your K swap to avoid needing the ecu conversion harness.
For more application-specific information, please take a look at the RSX Platform Page
We can either supply you with an ecu that is already socketed, or you can send one in to be socketed here free of charge with the purchase of the Ktuner Hardware. We STRONGLY urge you to use one of our already socketed ecus since there is very little we can do in the way of testing ecus that are sent in. We can certainly socket your ecu, but we cannot guarantee the functionality of it. All of our ecus are professionally socketed and ready to go, and come with clear ecu covers. To keep the cost to the user down all our ecus are used, but are in good condition.
If you are not sure what you need, please contact us before placing your order or take a look at the KTUNER FAQ .
Once you receive your unit, please take a look at the Quick Start Guide and download the software HERE