This is an adapter kit to use the 2007-2008 TL FlashPro for your 2003-2007 Accord V6 MT. This allows full user tuning and datalogging for the 2003-2007 Accord V6 MT.
CAN Adapter, 03-07 V6 Accord adapter
You need to provide:
Accord or TL FlashPro
A new or used ECU from the 2007-2008 TL (MT) or 2007 TL base AT.
ECU Part Numbers:
RDA-A83 through RDA-A84
RDB-A02 through RDB-A04
RDB-A11 through RDB-A12
Note - The Auto ECU needs a hardware modification for cruise control to work.
The CAN adapter cable connects from the DLC to the CAN bus connector.
The ECU adapter connects the 07/08 TL ECU to the 03-07 Accord harness.
WARNING - Not legal for sale or use in California on any pollution controlled motor vehicles.
Programmable ECU interface.
Connects via OBDII diagnostic port.
USB 2.0 connection
Works with Laptop or Desktop
No ECU modification necessary.
20 hours on board datalogging memory.
FlashProManager Windows software.
Check and clear diagnostic codes.
Custom laptop gauges.
Dual calibration storage - upload from one of two calibrations stored in the FlashPro
2007-08 TL tuning features
Ignition, fuel, idle speed, table editing.
MAP sensor based tuning.
Rev and launch limiters.
Map tracing & lambda overlay.
Expanded fuel, ignition and knock tables for forced induction.
4 bar MAP sensor support (43 psi).
Support for larger injectors.
Injector latency / dead time.
Individual cylinder fuel & ignition trim.
Individual cylinder knock count
Works with Hondata Traction control
Starting calibrations for NA, forced induction & larger injectors.
This FlashPro can only be sold to US/Canada addresses.