USD
  • USD
  • EUR
  • GBP
0

Xenocron

Xenocron DIY Wheel Speed Sensor Kit (RWSS)

Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily ...

Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily add a Hall Effect sensor to your vehicle for monitoring wheel speed, shaft speed...etc, anything you can think of that can use it. Wire it in to an extra Wheel Speed Input on your Standalone Engine Management System or replace your Transmission mounts VSS (vehicle speed sensor) to use Rear Wheel speed (Ground Speed) versus Front Wheel Speed. Kit Includes: Magnetic Hall Effect Speed Sensor 10' Shi...

(8 variants)

PWM Boost ECU Components for OBD1 Hondata S300 ...

Add PWM Boost Control to your OBD1 Honda ECU using the factory EGR Circuit This kit will work for...

Add PWM Boost Control to your OBD1 Honda ECU using the factory EGR Circuit This kit will work for Hondata S300 or Neptune PWM boost control as well using the "EGR" Pin A11 setting. Add either our Xenocron 3 Port or 4 Port PWM Solenoid Kit to your order and use your Honda OBD1 ECU to control boost!

$10.00

Chipped OBD1 VTEC ECU

***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING***       Honda OBD1 ECU (P28 Equivalent for VTEC)...

***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING***       Honda OBD1 ECU (P28 Equivalent for VTEC) Chipped and ready to go for eCtune, Uberdata, Crome, Neptune, Hondata (S100/S200), Hondata S300 All ECUs Professionally chipped and tested in-car before being shipped Comes chipped with a ZIF socket, datalogging header and a custom basemap burned to a reburnable SST chip. Options Info: - Choose 'Actual P28' if you must have an ECU that was originally a P28 ECU, all others will be a converted VT...

(12 variants)

Basemap Chip - Xenocron Custom

***PLEASE READ ITEM DESCRIPTION COMPLETELY BEFORE ORDERING***   Choose this product if you want a...

***PLEASE READ ITEM DESCRIPTION COMPLETELY BEFORE ORDERING***   Choose this product if you want a custom basemap created and burned to a chip using CROME PRO SOFTWARE only. Use this option if you ONLY want a basemap and chip and not necessarily the components used to chip your own ECU (see CHIPPING --> ECU KITS) When sending in your order, INCLUDE THESE DETAILS IN THE COMMENTS BOX as you checkout or your order will be delayed: - Engine (engine Code, Size, and specific internal work) - Inje...

(2 variants)

Chipping Kit w/ SST Chip (OBD1 ECUs)

H O N D A / A C U R A OBD0 or OBD1 ECU Chipping Kit w/ SST Eprom (eCtune / Crome / Uberdata / N...

H O N D A / A C U R A OBD0 or OBD1 ECU Chipping Kit w/ SST Eprom (eCtune / Crome / Uberdata / Neptune / Hondata / TurboEdit / BRE) This is my standard ECU chipping kit that will come with everything you need to chip your own OBD0 or OBD1 Honda/Acura USDM ECU. Instructions are located in the 'Tech Center' section of the site. ***OUR KITS NO LONGER CONTAIN COMPONENTS C51 & C52, AS THEY ARE NOT REQUIRED*** USDM Kit Includes - 28 pin machined DIP Socket - 28 pin Aries ZIF Socket - 4 pin ...

(12 variants)

Tuning Deposit

This is our tuning deposit for a specific date in the schedule. All dates are first come first se...

This is our tuning deposit for a specific date in the schedule. All dates are first come first serve.   Balance due will be required when you arrive for your appointment. Please see our Dyno Tuning Agreement as a brief overview for how you should prepare for your tuning appointment. You will be sent a confirmation EMAIL once set in the schedule. This email will be for a specific date, time and will include our tuning agreement with your responsibilities that must be completed before arriving ...

(4 variants)

Xenocron Basemap File for S300, KPRO, or FlashPro

***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING***   Choose this product if you want a basemap cr...

***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING***   Choose this product if you want a basemap created with Hondata S300, Hondata KPRO, or Hondata FlashPro that is to be EMAILED to you ONLY. No extra chip will be supplied, included or mailed to you with the purchase of this item. This file will not be uploaded to a system purchased from us before shipping out. You will receive the email and must connect and upload the file on your end. Please see software help files for your specific software...

(3 variants)

Xenocron VTEC Conversion Parts Kit (OBD1 ECU)

OBD1 ECU VTEC Conversion Kit (Uberdata, Crome, Hondata & Neptune compatible) Convert your n...

OBD1 ECU VTEC Conversion Kit (Uberdata, Crome, Hondata & Neptune compatible) Convert your non-vtec ECU (PR4/P05/P06/P75) to a VTEC ECU Runs identical to any P28 VTEC ECU Notes: - Includes all components to convert your USDM OBD1 non-Vtec ECU to control Vtec (PR4/P05/P06/P75) - Please SPECIFY and know what board type you are converting - If you have a 1720 P05 ECU, the extra transistor for the O2 Sensor conversion from 1-wire to 4-wire will be included already - If you have any questions...

(3 variants)

Fuel Pressure Regulator Blank 06-15 Civic

Fuel Pressure Regulator Blank Used for Fuel Systems to retain stock feed design in-tank, elimina...

Fuel Pressure Regulator Blank Used for Fuel Systems to retain stock feed design in-tank, eliminating the possibility of rubber hoses bursting Fits: 2006-2015 Civic, Scion FRS and Subaru BRZ May also fit 04-14 TSX, 2013+ ILX, based on technical drawings. DOES NOT FOT RSX, EP3, EM2 CIVICS

$29.95

Chipped OBD1 Non-VTEC ECU

***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING***       Non-VTEC OBD1 Honda ECU (PR4/P06/P75 Equ...

***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING***       Non-VTEC OBD1 Honda ECU (PR4/P06/P75 Equivalent) Chipped and ready to go for Uberdata, Crome, Neptune, Hondata All ECUs Professionally chipped and tested before being shipped Comes chipped with a ZIF socket, datalogging header and a custom basemap burned to a reburnable SST chip. ***Note: an ecu chipped for S300 does NOT come with the board itself, it is simply chipped in the proper fashion to accept a Hondata S300 unit. You must hav...

(8 variants)

RDX 410cc Injectors - Set of 4

Genuine US Spec RDX Injectors now available and in stock! This is a Set of (4) RDX 410cc OEM Inj...

Genuine US Spec RDX Injectors now available and in stock! This is a Set of (4) RDX 410cc OEM Injectors. No clips, adapters, spacers, etc are included in this kit, it is JUST injectors. We do keep these in stock, so if you see this item, know that it will ship out right away. As an added bonus, we sent a set of these out to be dynamically tested by Injector Dynamics and we include a real average dead-time chart with every set purchased through Xenocron. See other products in this category for...

$240.00

Xenocron Basemap File for Neptune RTP

***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING***      Choose this product if you want a basemap...

***PLEASE READ ITEM DESCRIPTION BEFORE ORDERING***      Choose this product if you want a basemap created with Neptune RTP that is to be EMAILED to you ONLY. No extra chip will be supplied, included or mailed to you with the purchase of this item. This file will not be uploaded to a system purchased from us before shipping out. You will receive the email and must connect and upload the file on your end. Please see software help files for your specific software for how to do this exactly. When...

$50.00

Xenocron B-Series Complete Cam Degree Kit

Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in...

Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in your B-Series camshafts, but to check valve-to-valve and valve-to-piston clearances as well. No high-performance motor should be assembled without performing these procedures, and with this kit you can easily do them yourself. This COMPLETE KIT includes the following: (1) Dial indicator extension (1) Aluminum mount for outer dial indicators (B-Beam) (1) Aluminum mount for center dial indicator (...

$249.00

Xenocron 4 Port PWM Boost Control Solenoid

For use with:   S300, K-Pro, FlashPro 2006-11 Civic Si, FlashPro S2000, FlashPro 07/08 TSX eCtu...

For use with:   S300, K-Pro, FlashPro 2006-11 Civic Si, FlashPro S2000, FlashPro 07/08 TSX eCtune Demon Neptune Demon Motec AEM Haltech Xenocron 4 port boost Solenoid utilizes the top and bottom of your waste-gate diaphragm. It allows you to use a much lower waste-gate spring pressure for better low gear boost control and better high gear, high boost settings. 5x the amount of boost when using a 10 lb waste-gate spring Better control which equals more power More accurate duty cycle contro...

(2 variants)

Xenocron 3 Port PWM Boost Solenoid Kit

Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and AEM. This is a...

Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and AEM. This is a HIGH quality solenoid that offers stable boost control with the PWM Functionality of eCtune, Neptune, Hondata S300, AEM and others. The kit includes (1) Solenoid, (2) Brass Hose Barbs and a screen fitting for the front port of the solenoid and wiring. Please consult your tuner for how this should be installed to your specific application as there are different ways to install this solenoid. If yo...

(4 variants)

PWM Solenoid Mounting Bracket

NOW OFFERING BOTH 3 PORT AND 4 PORT VERSIONS! This is a simple PWM Solenoid mounting bracket f...

NOW OFFERING BOTH 3 PORT AND 4 PORT VERSIONS! This is a simple PWM Solenoid mounting bracket for the typical MAC Valve solenoids used with aftermarket electronic boost controllers or ECU controlled boost with software like Neptune, eCtune, Hondata, Crome, and more. The kit includes (1) steel bracket and (2) machine screws

(2 variants)