USD
  • USD
  • EUR
  • GBP
0

Xenocron

Fuel Pressure Regulator Blank 06-15 Civic

Fuel Pressure Regulator Blank Used for Fuel Systems to retain stock feed design in-tank, elimina...

Fuel Pressure Regulator Blank Used for Fuel Systems to retain stock feed design in-tank, eliminating the possibility of rubber hoses bursting Fits: 2006-2015 Civic, Scion FRS and Subaru BRZ May also fit 04-14 TSX, 2013+ ILX, based on technical drawings. DOES NOT FOT RSX, EP3, EM2 CIVICS

$29.95

RDX 410cc Injectors - Set of 4

Genuine US Spec RDX Injectors now available and in stock! This is a Set of (4) RDX 410cc OEM Inj...

Genuine US Spec RDX Injectors now available and in stock! This is a Set of (4) RDX 410cc OEM Injectors. No clips, adapters, spacers, etc are included in this kit, it is JUST injectors. We do keep these in stock, so if you see this item, know that it will ship out right away. As an added bonus, we sent a set of these out to be dynamically tested by Injector Dynamics and we include a real average dead-time chart with every set purchased through Xenocron. See other products in this category for...

$240.00

Flex Fuel Converter Kit

A little Flex Fuel kit we worked up for those of you needing a tidy solution where your ECU accep...

A little Flex Fuel kit we worked up for those of you needing a tidy solution where your ECU accepts a 0-5 volt signal for flex % content! Kit Includes: Flex Fuel Sensor Flex Fuel Converter Wire Harness Connectors

$249.00

RDX Adapter Pack - OBD2 Honda

Want to install RDX 410cc injectors on your OBD2 Honda with B, D, F or H Series motor? Want to ma...

Want to install RDX 410cc injectors on your OBD2 Honda with B, D, F or H Series motor? Want to make that as easy as possible and a plug and play operation? Look no further, we have a complete package for installing a set of (4) RDX Injectors for these applications, and others that resemble the same install. Included in this package Four Anodized Aluminum Adapters (choice of 11mm or 14mm) to fit your factory Honda Rail Four Assembled Plug and play clips to install on your factory OBD2 harness...

(3 variants)

Xenocron Fuel Pump Relay Kit

New and Improved!!! After the initial success of our fuel pump relay kit, we decided to improve ...

New and Improved!!! After the initial success of our fuel pump relay kit, we decided to improve it a bit for even better functionality and a cleaner install than before. We now include a better relay with a socket and terminals to wire directly to it, reducing the amount of connections in the kit. Help your fuel pump run at its full potential with our upgraded fuel pump relay kit. This kit allows you to hook up the power to your factory or aftermarket internal/external fuel pump directly fr...

$35.00

RDX Set of 2 Pins & Seals for Clips

Set of 2 pins & seals for RDX Injector Clips

Set of 2 pins & seals for RDX Injector Clips

$2.00

RDX 410cc Injectors - Set of 6

This is a Set of (6) RDX 410cc OEM Injectors. No clips, adapters, spacers, etc are included in th...

This is a Set of (6) RDX 410cc OEM Injectors. No clips, adapters, spacers, etc are included in this kit, it is JUST injectors. We do keep these in stock, so if you see this item, know that it will ship out right away. As an added bonus, we sent a set of these out to be dynamically tested by Injector Dynamics and we include a real average dead-time chart with every set. See other products in this category for injector clips or install and adapter kits for your specific application. Email us be...

$360.00

Xenocron Fuel Pressure Gauge Kit for Stock Hond...

The Xenocron Fuel Pressure Gauge Set with liquid filled gauge allows for accurately measuring fue...

The Xenocron Fuel Pressure Gauge Set with liquid filled gauge allows for accurately measuring fuel pressure. Proper fuel pressure is critical at full throttle to prevent lean conditions. This gauge kit includes a handy adapter to mount the gauge on top of the factory fuel filter. Perfect for those of you using a stock fuel rail with no port for a gauge. Fits: '88-'00 Civic/CRX & '90-'00 Acura Integra **EVERYTHING PICTURED IS INCLUDED WITH THIS KIT**

$49.95

Xenocron D.I.Y Dual 044 Surge Tank Plate

This is a Do It Yourself Dual 044 surge tank plate constructed of aluminum. This item is sold as ...

This is a Do It Yourself Dual 044 surge tank plate constructed of aluminum. This item is sold as is with no instructions and is designed as a universal application. No fittings or pumps are included with this kit but can be added using the available drop down menu. IF YOU HAVE ANY QUESTIONS FEEL FREE TO CALL OR EMAIL US

(12 variants)

Xenocron 340 ltr/hr Fuel Pump

***NEWLY RELEASED*** Xenocron Tuning is proud to offer these 340lph pumps for those of you loo...

***NEWLY RELEASED*** Xenocron Tuning is proud to offer these 340lph pumps for those of you looking to go further than your 255lph pump can take you. These are similar to our XFP 255lph pumps but with the ability to flow more and support more horsepower. We have had great success over the years with the 255lph pumps and back these 340lph pumps with the same 1 year warranty. We include a universal installation kit with every pump. In some installs the stock hose may need to be re...

(2 variants)

Washer set for ID Injectors

This is a 4 pack of the washers that we typically supply with Injector Dynamics injectors (B/D/H/...

This is a 4 pack of the washers that we typically supply with Injector Dynamics injectors (B/D/H/F series). They are for use on the bottom of the injector on certain applications to keep the injector from pushing through the rubber seal.

$5.00

RDX Injectors Adapter Pack

A lot of people are using OEM RDX injectors on their low budget street setups these days but beca...

A lot of people are using OEM RDX injectors on their low budget street setups these days but because they have a 14mm top they will not fit into the typical B, D or H series 11m fuel rail as well they are a touch short. Use this 4 pack of our NEW adapter tops with retaining clips to go from 14mm injector to 11mm fuel rail and install them into your fuel rail with ease.

$30.00

RDX Injectors Adapter 6 Pack

***Pack of six injector tops***     A lot of people are using OEM RDX injectors on their low budg...

***Pack of six injector tops***     A lot of people are using OEM RDX injectors on their low budget street setups these days but because they have a 14mm top they will not fit into the typical B, D or H series 11m fuel rail as well they are a touch short. Use this 6 pack of our NEW adapter tops with retaining clips to go from 14mm injector to 11mm fuel rail and install them into your fuel rail with ease.

$45.00

RDX Injector Clip

*New and improved* This item is listed PER INJECTOR, order the quantity based on how many inject...

*New and improved* This item is listed PER INJECTOR, order the quantity based on how many injectors you need to adapt! This is for ONE clip with two pins and two grommets. This allows you to simply cut off your old plug and crimp on the new pins, making for a neat install with no soldering. If you have questions, please email us PRIOR to ordering. There will be no returns or exchanges on these items.

$6.99

RDX Adapter Pack - OBD1 Honda (SET OF 6)

Included in this package SIX (11mm or 14mm) Anodized Aluminum Adapters to fit your factory Honda...

Included in this package SIX (11mm or 14mm) Anodized Aluminum Adapters to fit your factory Honda Rail SIX Assembled Plug and play clips to install on your factory harness to the RDX Injectors These clips will also fit OBD0 Honda Applications or any injector clip that fits the EV1 Bosch style injector (Precision, RC, Bosch, etc) If you haven't already purchased your RDX Injectors from Acura, we stock the injectors as well, and ours come with a Proprietary Injector Dynamic Flow Sheet complete...

(3 variants)

RDX Adapter Pack - OBD1 Honda (SET OF 4)

Included in this package FOUR (11mm or 14mm) Anodized Aluminum Adapters to fit your factory Hond...

Included in this package FOUR (11mm or 14mm) Anodized Aluminum Adapters to fit your factory Honda Rail FOUR Assembled Plug and play clips to install on your factory harness to the RDX Injectors These clips will also fit OBD0 Honda Applications or any injector clip that fits the EV1 Bosch style injector (Precision, RC, Bosch, etc) If you haven't already purchased your RDX Injectors from Acura, we stock the injectors as well, and ours come with a Proprietary Injector Dynamic Flow Sheet comple...

(3 variants)