USD
  • USD
  • EUR
  • GBP
0

Xenocron

Xenocron EMAP Backpressure Kit

Xenocron Exhaust Manifold Back Pressure Kit This is a combination of products that will allow you...

Xenocron Exhaust Manifold Back Pressure Kit This is a combination of products that will allow you to add or log an Exhaust Manifold Pressure Readings through your ECU or datalogger This kit includes: (1) Backpressure Canister (Pressure Pulsation Damper) (1) Steel 1/8" NPT Weld Fitting (2) Compression Fittings (1 90 deg, 1 straight) 3 Feet of Flexible Copper Tubing Optional on this kit is an AEM 3.5 bar or 5.0 bar map sensor, or if you would like to use your own map sensor, you can choose th...

(3 variants)

Xenocron EMAP Backpressure Damper

This is a Exhaust Manifold Backpressure damper that aids in the ability to measure backpressure o...

This is a Exhaust Manifold Backpressure damper that aids in the ability to measure backpressure on your turbocharged vehicle. This item is for the damper only but to completely install this you might require fittings, line, and a sensor. ***IF YOU HAVE ANY QUESTIONS PLEASE CALL OR EMAIL BEFORE PLACING YOUR ORDER***

$69.95 $79.95

Xenocron Turbo filter

Please read this Installation Instruction link before purchasing your turbo filter! Xenocron's...

Please read this Installation Instruction link before purchasing your turbo filter! Xenocron's turbo filter is meant to prevent large particles from being drawn into the turbo along with saving space and looking 'fashionable.' A small (roughly 2" in length) coupler can be added using the drop-down menu. Clamps are not included. ***Ideal for track use on lower boost setups, never tested but assumed that at higher boost levels on large turbos the screen may become a restriction*** U...

(6 variants)

Xenocron Manual Boost Controller

This is our popular manual boost controller. It can be used with internal and external wastegates...

This is our popular manual boost controller. It can be used with internal and external wastegates to increase boost up to approximately twice the spring pressure or internal gate setting. In some instances you may be able to boost higher. This is an extremely stable boost controller and easy to use. Once you dial in your intended boost pressure, just tighten the lock nut and forget about it! This boost controller will help decrease spool times as well resulting in a better powerband even if u...

$35.00

Xenocron .063" Oil Restrictor

Reduces oil pressure to the turbo to help prevent problems associated with high oil pressure such...

Reduces oil pressure to the turbo to help prevent problems associated with high oil pressure such as oil leaking past the seals. 1/8" NPT inlet and outlet. If you are unsure if you need a restrictor for your application, please contact the manufacturer of your turbo.

$14.00

Xenocron 90 Degree Tube Fitting for EMAP Kit

This is the 90 Degree Tube fitting we use in our EMAP Kits.  Will fit a 3/16' OD Tube, is made of...

This is the 90 Degree Tube fitting we use in our EMAP Kits.  Will fit a 3/16' OD Tube, is made of brass and the other end is 1/8" NPT male threads.

$8.60

Xenocron 42" Turbo Oil Feed Line

This item is a 42" long (3/16" ID) turbo oil feed line with 1/8" NPT male fittings on both ends o...

This item is a 42" long (3/16" ID) turbo oil feed line with 1/8" NPT male fittings on both ends of the line. Additional fittings may be required to attach this line to your turbo.

$49.00

Xenocron Remote Oil Pressure Tee Kit

This kit will allow you to retain your stock honda oil pressure sending unit while adding additio...

This kit will allow you to retain your stock honda oil pressure sending unit while adding additional oil supply ports. By utilizing a 24" oil line to place the tee(s) and sender(s) away from the motor, this unit reduces the stress on the block and fittings. This reduces the chance of a fitting breaking in the block. Using the included extra tee and/or plug, the kit can be configured to have one, two, or three ports. This facilitates the use of a turbo or LS/VTEC feed line (not included) in ad...

$55.00

Xenocron 54" Turbo Oil Feed Line

This item is a 54" long (3/16" ID) turbo oil feed line with 1/8" NPT male fittings on both ends o...

This item is a 54" long (3/16" ID) turbo oil feed line with 1/8" NPT male fittings on both ends of the line. Additional fittings may be required to attach this line to your turbo.

$49.00