USD
  • USD
  • EUR
  • GBP
0

Xenocron

PWM Boost ECU Components for OBD1 Hondata S300 ...

Add PWM Boost Control to your OBD1 Honda ECU using the factory EGR Circuit This kit will work for...

Add PWM Boost Control to your OBD1 Honda ECU using the factory EGR Circuit This kit will work for Hondata S300 or Neptune PWM boost control as well using the "EGR" Pin A11 setting. Add either our Xenocron 3 Port or 4 Port PWM Solenoid Kit to your order and use your Honda OBD1 ECU to control boost!

$10.00

Chipping Kit w/ SST Chip (OBD1 ECUs)

H O N D A / A C U R A OBD0 or OBD1 ECU Chipping Kit w/ SST Eprom (eCtune / Crome / Uberdata / N...

H O N D A / A C U R A OBD0 or OBD1 ECU Chipping Kit w/ SST Eprom (eCtune / Crome / Uberdata / Neptune / Hondata / TurboEdit / BRE) This is my standard ECU chipping kit that will come with everything you need to chip your own OBD0 or OBD1 Honda/Acura USDM ECU. Instructions are located in the 'Tech Center' section of the site. ***OUR KITS NO LONGER CONTAIN COMPONENTS C51 & C52, AS THEY ARE NOT REQUIRED*** USDM Kit Includes - 28 pin machined DIP Socket - 28 pin Aries ZIF Socket - 4 pin ...

(12 variants)

Xenocron VTEC Conversion Parts Kit (OBD1 ECU)

OBD1 ECU VTEC Conversion Kit (Uberdata, Crome, Hondata & Neptune compatible) Convert your n...

OBD1 ECU VTEC Conversion Kit (Uberdata, Crome, Hondata & Neptune compatible) Convert your non-vtec ECU (PR4/P05/P06/P75) to a VTEC ECU Runs identical to any P28 VTEC ECU Notes: - Includes all components to convert your USDM OBD1 non-Vtec ECU to control Vtec (PR4/P05/P06/P75) - Please SPECIFY and know what board type you are converting - If you have a 1720 P05 ECU, the extra transistor for the O2 Sensor conversion from 1-wire to 4-wire will be included already - If you have any questions...

(3 variants)

Hondata S300 Chipping Kit

This is a chipping kit designed for Hondata S300 Boards Only Includes - 32 pin machined header - ...

This is a chipping kit designed for Hondata S300 Boards Only Includes - 32 pin machined header - 0.1µf ceramic disc capacitors (qty 2) - 1k resistor - 74 HC373 chip NO JDM OPTION

$15.00

Xenocron Q31 Transistor

Transistor for Honda ECU spots labeled Q34 or Q31 Q31 is the transistor that commonly blows up wh...

Transistor for Honda ECU spots labeled Q34 or Q31 Q31 is the transistor that commonly blows up when someone plugs the Purge Control Solenoid plug into the IAT sensor.

$2.00

Aries ZIF Socket

28 Pin Zero Insertion Force socket (Makes for easy chip changes) Designed to be carefully press...

28 Pin Zero Insertion Force socket (Makes for easy chip changes) Designed to be carefully pressed into the 28 Pin DIP Socket that is soldered into your ECU.

$9.00

Xenocron C14 (Main Board Capacitor)

This is a replacement capacitor for the spot labeled C14 on OBD1 Honda/Acura ECUs. We replace the...

This is a replacement capacitor for the spot labeled C14 on OBD1 Honda/Acura ECUs. We replace these as a preventative measure on every ECU we chip as over time they tend to go bad. If you purchased an ecu chipping kit elsewhere that did not include a new main board capacitor, this is for you!

$3.00

Xenocron R54 Resistor

1k Ohm Resistor for spot R54 on the Honda ECUs

1k Ohm Resistor for spot R54 on the Honda ECUs

$1.00

Xenocron Q26 Transistor

Transistor for Honda ECU spots labeled Q26 or Q30...from our various VTEC Conversion Kits

Transistor for Honda ECU spots labeled Q26 or Q30...from our various VTEC Conversion Kits

$2.00

SI5151 Vtec High Side Switch

NEW High Side switch for VTEC Conversions in OBD1 Non-VTEC ECUs

NEW High Side switch for VTEC Conversions in OBD1 Non-VTEC ECUs

$19.00

Neptune RTP Basic Chipping Kit w/ SST Chip (OB...

Neptune RTP Chip Kit OBD1 ECU Basic Chipping Kit This is my basic chipping kit that will come wi...

Neptune RTP Chip Kit OBD1 ECU Basic Chipping Kit This is my basic chipping kit that will come with only the essential components you need to chip your OBD1 Honda/Acura USDM ECU for Neptune RTP. Kit Includes - 28 pin machined DIP Socket - 4 pin CN Datalogging Header - 1k resistor - 74 HC373 chip - SST 27SF512 Eprom chip

(2 variants)

HC373 Thru-Hole Latch

20 Pin Thru Hole Latch for OBD1 Honda ECUs

20 Pin Thru Hole Latch for OBD1 Honda ECUs

(2 variants)

Xenocron Q101 Transistor

Transistor for Honda ECU spots labeled Q101 or Q17...from our various VTEC Conversion Kits

Transistor for Honda ECU spots labeled Q101 or Q17...from our various VTEC Conversion Kits

$2.00

Xenocron DIP Socket

28 Pin Machined DIP Socket.

28 Pin Machined DIP Socket.

(2 variants)

Xenocron C60 Capacitor

This is the Capacitor that gets soldered into spot "C60" when doing VTEC Conversions

This is the Capacitor that gets soldered into spot "C60" when doing VTEC Conversions

$1.00

SI5151 Vtec High Side Switch 10 pack

10 pack of NEW High Side switches for VTEC Conversions in OBD1 Non-VTEC ECUs

10 pack of NEW High Side switches for VTEC Conversions in OBD1 Non-VTEC ECUs

$150.00