USD
  • USD
  • EUR
  • GBP
0

Moates

4 Wire Hulog Cable

This is a replacement 4 wire cable for the Moates Hulog.

This is a replacement 4 wire cable for the Moates Hulog.

$5.00

ALDU1 XtremeALDL USB-to-ALDL Converter

Does not work by itself, needs the CABL1 or CABL2 to work! USB-based ALDL converter box. Goes bet...

Does not work by itself, needs the CABL1 or CABL2 to work! USB-based ALDL converter box. Goes between your PC and a CABL1 or CABL2. Works great, unlike most USB/Serial converters. Goes straight from USB to ALDL. Does NOT work with a serial port. Compatible with all the popular programs in Windows (TunerProRT, DataMaster, TunerCat, EFILiveV4/OBD1, WinALDL). Will do 160-baud and 8192-baud communication. Not for use with the 'Moates' ECM852 software or other DOS-based programs. Self-powered via ...

$50.00

BURN2 USB Chip Burner

The Burn2 has all the functionality of the Burn1 but is smaller and uses a mini-USB cable. The ne...

The Burn2 has all the functionality of the Burn1 but is smaller and uses a mini-USB cable. The new "heartbeat" LED light lets you know whether a chip is in the burner and if it is positioned in the correct direction. Most commonly used with Crome, Crome PRO, eCtune, Neptune, Hondata, TurboEdit, BRE (Ben Ogle\'s ROM Editor), Uberdata, & Tuner PRO USB Chip Programmer works with the AT29C256, 27SF512, and AM29F040 chips. Self-powered from the USB port, so no power adapter is needed! Burner c...

(3 variants)

CABL1 OBD1-Style ALDL Connector

Does not work by itself! Needs the ALDU1 or APU1 to work. Works with pre-1995 GM ALDL ports. You ...

Does not work by itself! Needs the ALDU1 or APU1 to work. Works with pre-1995 GM ALDL ports. You need this to log data on your GM. Connects directly to AutoProm or ALDU1. Is used on most pre-1996 GM EFI cars. Does NOT work by itself! Requires the ALDU1 or APU1 to actually interface to the PC!

$30.00

CABL2 OBD2-Style ALDL Connector

Does not work by itself! Needs the ALDU1 or APU1 to work. Used for datalogging and PCM reflash on...

Does not work by itself! Needs the ALDU1 or APU1 to work. Used for datalogging and PCM reflash on 1995 LT1 setups. Connects directly to AutoProm or ALDU1. Is used primarily on 94/95 GM LT1s. Does NOT work by itself! Requires the ALDU1 or APU1 to actually interface to the PC!

$30.00

Demon 2 eProm Emulator and Datalogging Hardware

NEW AND IMPROVED IN STOCK AND READY TO SHIP! The Demon 2 is the newest in our line of Honda/Acura...

NEW AND IMPROVED IN STOCK AND READY TO SHIP! The Demon 2 is the newest in our line of Honda/Acura-friendly P28/P30/P72-compatible technology. Totally bumpless realtime emulation (real time tuning), embedded datalogging, auxiliary ports, 16x calibration storage. In-situ device, Demon 2 fits inside both USDM and the Demon 1in the JDM ECUs. Gives all the power of the Ostrich, Hulog, RTP, and other products into one. Full native compatibility with Crome, Neptune, TunerPro, and others. The Moates ...

(18 variants)

HDR1 Memcal Header

Use this adapter to read the 'stock' binary from your TPI-style Memcal. Plugs into your 'stock' P...

Use this adapter to read the 'stock' binary from your TPI-style Memcal. Plugs into your 'stock' P4-style Memcals. Allows you to download your original 'factory' chip contents directly using a chip programmer/reader like the BURN1 or APU1. Very durable, and designed for repeated use.

$10.00

Moates 2 Timer

This little gem plugs into your 28-pin socket that normally takes a 27C128 or 27C256. It has a si...

This little gem plugs into your 28-pin socket that normally takes a 27C128 or 27C256. It has a single wire lead coming off of it. Put a 27SF512 chip in it, and switch the wire lead to chassis ground to switch between two separate programs! Comes with a 27SF512 chip. Instructions are in the TECH CENTER

$30.00