USD
  • USD
  • EUR
  • GBP
0

Rywire

OBD0 - OBD1 Distributor Adapter

This will convert Non-OBD (OBD0) 88-91 MPFI style distributor plugs to the 92-95 style OBD1 plugs...

This will convert Non-OBD (OBD0) 88-91 MPFI style distributor plugs to the 92-95 style OBD1 plugs. Note: To use a OBD1 Distributor, you must also be using an OBD1 or 2 ECU. (OBD Compliant) Connector plugs may be used parts, but we construct the wire harnesses ourselves in-house

$50.00

OBD0 MPFI to DOHC ZC Distributor Adpater

This will convert a Non-OBD (OBD0) 88-91 7-pin MPFI distributor plug to the 5-pin distributor plu...

This will convert a Non-OBD (OBD0) 88-91 7-pin MPFI distributor plug to the 5-pin distributor plug with 2-pin External CPS plug. This is found on the DOHC ZC. FAQ Q: Will this work on a dx/std civic? A: No, this is only for a MPFI chassis.

$50.00

Rywire Budget B&D-Series Tucked Engine Harness

Our B-series wire-tuck engine harness is nearly identical to our Mil-spec engine harness line wit...

Our B-series wire-tuck engine harness is nearly identical to our Mil-spec engine harness line with the primary differences being the type of wire used, the single white wire color and expandable loom used. All connectors and materials are new. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a white identification label for easy installation. All heavy interference circuits are protected and grounded with proper wire covering. Our engine harne...

$449.00

Rywire K-Series Swap Harnesses

Rywire K-Series Chassis Adapter This adapter is made to allow the installation of a K-Series engi...

Rywire K-Series Chassis Adapter This adapter is made to allow the installation of a K-Series engine with the 02-04 K20 engine harness. It will also work for our all RYWIRE K-Series engine harnesses. K1 & K2 types! This wire harness connects your K-Series engine harness to your chassis interior harness while adding the E-plug and all its functions. This harness is primarily made for a K-Pro or Re-Flashed ECU but can be used with a stock RSX ECU provided you have bypassed the immobilizers a...

(10 variants)

Rywire Mil-Spec Tucked B-Series harness

These Rywire B-Series wire harnesses of...

These Rywire B-Series wire harnesses offer Mil-Spec Teflon coated wire with a maximum heat rating of 200°C . The Teflon coated wire is loomed with The highest quality Raychem DR-25 heat shrink covering, and adhesive lined wire junctions to keep moisture out. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a yellow identification labels for easy installation. All heavy interference circ...

(12 variants)

Rywire OBD0 to OBD1 ECU Conversion Harness

Convert your 1988-1991 civic/crx and 1990-1991 Integra to run any OBD1 1992-1995 ecu. Requirement...

Convert your 1988-1991 civic/crx and 1990-1991 Integra to run any OBD1 1992-1995 ecu. Requirements: All civic/crx models must either be a SI or HF or a MPFI(Multi Point Fuel Injection) converted car. DX and Standard models that are DPFI (Dual Point Fuel Injection) must be converted to MPFI for this conversion to work properly. This conversion is primarily made for a 5 speed chassis. You will need an OBD1 ecu, distributor and a 4 wire O2 sensor. All harnesses come with detailed instructions fo...

$135.00

Rywire OBD1 to OBD2 10-pin Distributor Adapter

This will convert a OBD1 Distributor plug set to match a OBD2 10-pin style Distributor. OBD2 10-p...

This will convert a OBD1 Distributor plug set to match a OBD2 10-pin style Distributor. OBD2 10-pin Distributor Style Engines include: * All 1996-01 B-Series engines * 1996-1998 Honda Civic D-Series engines.

$50.00

Rywire OBD1 to OBD2a ECU Conversion Harness

Converts any: 1992-1995 Acura Integra 1992-1995 Honda Accord (4 Cylinders Only) 1992-1995 Honda C...

Converts any: 1992-1995 Acura Integra 1992-1995 Honda Accord (4 Cylinders Only) 1992-1995 Honda Civic 1992-1995 Honda Del Sol 1992-1995 Honda Prelude to run any OBD2a ECU Requirements: This conversion is primarily made for 5 speed chassis. You will need: - OBD2a ECU - Secondary 4-wire O2 sensor. (US Spec Only) What you get: - Extra Pins - Detailed Instructions - Full Technical Support

(2 variants)