USD
  • USD
  • EUR
  • GBP
0

KTuned

K-Tuned B &D Series Shifter

JUST IN FROM K-TUNED!!! Application: B and D Series Engines The K-Tuned B & D Se...

JUST IN FROM K-TUNED!!! Application: B and D Series Engines The K-Tuned B & D Series Shifter was designed with full adjustability in mind. The shifter pivot ball is height adjustable, shifter height is adjustable and the offset elbow of the shifter can be rotated to several different positions. The adjustable pivot ball allows the user to thread the pivot ball higher up on the shift rod to shorten shift throw if desired. Construction is as expected, only high quality mater...

(2 variants)

K-Tuned Billet RSX Shifter Base Plate

Fits: 1994-2001 Acura Integra, 1988-2000 Honda Civic The K-Tuned Billet Shifter Base Plate is des...

Fits: 1994-2001 Acura Integra, 1988-2000 Honda Civic The K-Tuned Billet Shifter Base Plate is designed to install an RSX Type-S or comparable shifter box without cutting a hole in the exhaust tunnel of the chassis. This setup is preferred by many racers, esp. road course racers, because it mounts the shifter higher in the vehicle, keeping it closer to the driver and the steering. It also leaves a lot more room below the car for large exhaust systems. The Shifter Base Plate was designed to rou...

$116.99 $129.99

K-Tuned Billet Shift Knob

Applications: All Honda / Acura models and any shifter with a M10 x 1.5 thread The K-Tuned Billet...

Applications: All Honda / Acura models and any shifter with a M10 x 1.5 thread The K-Tuned Billet Shift Knob is the result of quite a bit of customer and racer feedback. We already offer several K-Series shifter upgrades so it was definitely time for us to develop a clean and functional shift knob. The process begins with a solid billet bar of 6061 aluminum, and each knob is machined to final size on a CNC lathe. After the lathe, the blank knobs are sent out for the anodizing process. The bla...

(6 variants)

K-Tuned Billet Shifter Arm

Applications: Fits oem DC5 RSX shifter boxes from K20A/A2/A3/Z1 engines. Does not fit NEW Buddy C...

Applications: Fits oem DC5 RSX shifter boxes from K20A/A2/A3/Z1 engines. Does not fit NEW Buddy Club and Revo shifters. The K-Tuned Billet Shifter Arm is a direct replacement for the sloppy oem plastic shifter arm. This 100% billet aluminum arm uses an extremely durable delrin pivot ball with much tighter clearances than stock. We have also fitted the arm with a stiffer heat treated neutral return spring. These 3 combined parts virtually eliminate the "play" or ñloosenessî that is a common co...

$98.99 $109.99

K-Tuned Billet Shifter Stops (For RSX Shifter)

Applications: Must be used with the K-Tuned Billet RSX Shifter. K-Tuned Billet Shift Stops are no...

Applications: Must be used with the K-Tuned Billet RSX Shifter. K-Tuned Billet Shift Stops are now available for our popular Billet RSX Shifter. These stops were designed to prevent over-shifting during race inspired gear changes. Over-shifting is a problem that can cause damage such as stretched or broken shift cables, worn or broken shift selector parts and even damage to the transmission gears and shift forks. With our stops mounted in place, they will physically ñstopî the shift lever fro...

$53.99 $59.99

K-Tuned Billet TSX/Accord Shifter

Applications: 2004-2008 Acura TSX, 2003-2007 Honda Accord (including the CL7 & CL9) and 2004-...

Applications: 2004-2008 Acura TSX, 2003-2007 Honda Accord (including the CL7 & CL9) and 2004-2008 Acura TL. Plus several K-Swap applications. The K-Tuned TSX/Accord Shifter is a direct replacement for the 2004-2008 TSX, the 2003-2007 Accords and the 2004-2008 Acura TL. To keep that statement clear, this shifter is a direct drop in replacement for all three cars and their matching OEM cables, cable brackets and transmissions. If you have a K-Swap car, applications definitely go a bit furt...

(12 variants)

K-Tuned OEM Spec Shifter Cables w/Billet Bushin...

Applications: 2006-11 Civic Si, K-Swapped cars with K20Z3 trans. K-Tuned OEM-Spec / Street Shift...

Applications: 2006-11 Civic Si, K-Swapped cars with K20Z3 trans. K-Tuned OEM-Spec / Street Shifter Cables are a strong and cost effective replacement for all OEM 2006-11 Civic Si cables. Fitment and overall length is identical to OEM which makes them compatible with all OEM and K-Tuned shifter boxes, as well as many other aftermarket shifter box options. These OEM-Spec Shifter Cables are made entirely of high quality materials and they were designed to meet or exceed the OEM units in all a...

$251.99 $279.99

K-Tuned OEM/Street Shifter Cables

Shifter cables have been a high demand part in the K-Series community for a few years now. If you...

Shifter cables have been a high demand part in the K-Series community for a few years now. If you are putting together a K-swapped car and didn’t get the shifter cable set with your engine, you can either try to find them used or get them brand new from a local Honda/Acura dealer. The problem with the dealership is they can be expensive and occasionally, they are on backorder which means there is a wait time to get them in hand. K-Tuned OEM-Spec / Street Shifter Cables are a strong and cost e...

$251.99 $279.00