USD
  • USD
  • EUR
  • GBP
0

Rywire

OBD0 - OBD1 Distributor Adapter

This will convert Non-OBD (OBD0) 88-91 MPFI style distributor plugs to the 92-95 style OBD1 plugs...

This will convert Non-OBD (OBD0) 88-91 MPFI style distributor plugs to the 92-95 style OBD1 plugs. Note: To use a OBD1 Distributor, you must also be using an OBD1 or 2 ECU. (OBD Compliant) Connector plugs may be used parts, but we construct the wire harnesses ourselves in-house

$50.00

Rywire K-Series Swap Harnesses

Rywire K-Series Chassis Adapter This adapter is made to allow the installation of a K-Series engi...

Rywire K-Series Chassis Adapter This adapter is made to allow the installation of a K-Series engine with the 02-04 K20 engine harness. It will also work for our all RYWIRE K-Series engine harnesses. K1 & K2 types! This wire harness connects your K-Series engine harness to your chassis interior harness while adding the E-plug and all its functions. This harness is primarily made for a K-Pro or Re-Flashed ECU but can be used with a stock RSX ECU provided you have bypassed the immobilizers a...

(10 variants)

Rywire OBD0 to OBD1 ECU Conversion Harness

Convert your 1988-1991 civic/crx and 1990-1991 Integra to run any OBD1 1992-1995 ecu. Requirement...

Convert your 1988-1991 civic/crx and 1990-1991 Integra to run any OBD1 1992-1995 ecu. Requirements: All civic/crx models must either be a SI or HF or a MPFI(Multi Point Fuel Injection) converted car. DX and Standard models that are DPFI (Dual Point Fuel Injection) must be converted to MPFI for this conversion to work properly. This conversion is primarily made for a 5 speed chassis. You will need an OBD1 ecu, distributor and a 4 wire O2 sensor. All harnesses come with detailed instructions fo...

$135.00

Rywire OBD1 to OBD2 10-pin Distributor Adapter

This will convert a OBD1 Distributor plug set to match a OBD2 10-pin style Distributor. OBD2 10-p...

This will convert a OBD1 Distributor plug set to match a OBD2 10-pin style Distributor. OBD2 10-pin Distributor Style Engines include: * All 1996-01 B-Series engines * 1996-1998 Honda Civic D-Series engines.

$50.00

Rywire OBD1 to OBD2a ECU Conversion Harness

Converts any: 1992-1995 Acura Integra 1992-1995 Honda Accord (4 Cylinders Only) 1992-1995 Honda C...

Converts any: 1992-1995 Acura Integra 1992-1995 Honda Accord (4 Cylinders Only) 1992-1995 Honda Civic 1992-1995 Honda Del Sol 1992-1995 Honda Prelude to run any OBD2a ECU Requirements: This conversion is primarily made for 5 speed chassis. You will need: - OBD2a ECU - Secondary 4-wire O2 sensor. (US Spec Only) What you get: - Extra Pins - Detailed Instructions - Full Technical Support

(2 variants)

Rywire OBD1 to OBD2b ECU Conversion Harness

Converts any: 1992-1995 Acura Integra 1992-1995 Honda Accord (4 Cylinders Only) 1992-1995 Honda C...

Converts any: 1992-1995 Acura Integra 1992-1995 Honda Accord (4 Cylinders Only) 1992-1995 Honda Civic 1992-1995 Honda Del Sol 1992-1995 Honda Prelude to run any OBD2b ECU Requirements: This conversion is primarily made for 5 speed chassis. You will need: - OBD2b ECU - Secondary 4-wire O2 sensor. (US Spec Only) What you get: - Extra Pins - Detailed Instructions - Full Technical Support

(2 variants)

Rywire OBD1 Tuner Harness

This harness allows you to tap into all major sensors, power (12v) and ground on the ECU as well ...

This harness allows you to tap into all major sensors, power (12v) and ground on the ECU as well as send a Wideband voltage signal to the ECU without splicing into the customers harness. One side plugs into the stock OBD1 harness ECU plugs, the other side plugs into an OBD1 ECU. (pass thru harness) As a tuner, this can easily save you 20 minutes of wiring/setup time and also tear down (no heat shrinking or electrical tape on wires you had to tap into. Personally I use this to power my LM-1 wh...

$145.00

Rywire OBD2a to OBD1 ECU Conversion Harness

Converts any: 1996-1999 Acura Integra 1996-1998 Honda Civic 1996-2001 Honda Prelude 1996-1997 Hon...

Converts any: 1996-1999 Acura Integra 1996-1998 Honda Civic 1996-2001 Honda Prelude 1996-1997 Honda Accord to run any OBD1 1992-1995 ECU. Requirements: This conversion is primarily made for 5 speed chassis You will need: - OBD1 1992-1995 ECU What you get: - Full Technical Support

$125.00