USD
  • USD
  • EUR
  • GBP
0

Sales and Specials

Mishimoto Acura RSX Silicone Radiator Hose Kit,...

Mishimoto Acura RSX radiator hose kits are made with a dual layer combining high grade silicone a...

Mishimoto Acura RSX radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with designed and engineered for a direct OEM fit. The perfect replacement for stock Acura RSX hoses. Part # MMHOSE-RSX-02 Please contact us for other colors. Picture is generic and may not represent the exact product listed.

(2 variants)

Mishimoto RSX Racing Thermostat

The Mishimoto racing thermostat for the 2002-2006 Acura RSX will promote greater cooling efficien...

The Mishimoto racing thermostat for the 2002-2006 Acura RSX will promote greater cooling efficiency throughout your engine. The Mishimoto racing thermostat will significantly lower high engine temperature produced by modified and upgraded turbo applications. Once the engine is fully warmed up the Mishimoto racing thermostat will open up at a lower temperature (60°C) than standard thermostats (82°C), also allowing the coolant to flow through the engine sooner thus reducing and maintaining cool...

$72.00 $80.00

K-Tuned Upper Coolant Housing (w/ Filler & Hose...

Here is the K-Tuned Upper Coolant Housing. With applications for both K20 and K24 engines, these...

Here is the K-Tuned Upper Coolant Housing. With applications for both K20 and K24 engines, these housings will provide several unique advantages over the stock units. The hose outlet on the K-Tuned housing pivots slightly, allowing approximately 15 degrees of angle adjustment. This is helpful when compared to the fixed the factory outlet that always seems to put the upper rad hose in the path of the intake piping. This housing features a 1.25” rad hose outlet for use with regular rubber...

(3 variants)

Mishimoto Fan Switch

The Mishimoto Thermoswitch Fan Switch replaces your OEM fan switch, allowing your radiator fan to...

The Mishimoto Thermoswitch Fan Switch replaces your OEM fan switch, allowing your radiator fan to activate at 80 degrees Celcius, 15 degrees lower than stock temperature. Installation is simple with direct replacement to OEM switch. Please select the part number that matches your vehicle Part# MMFAN-SWITCH Fits Acura CL (all) 97-03 Acura Integra (all) 94-01 Acura Legend (all) 86-95 Acura MDX (all) 01-02 Acura NSX (all) 91-05 Acura RSX (all) 02-06 Acura RL (all) 96-04...

(3 variants)

Mishimoto Honda/Acura Racing Thermostat

MODEL#MMTS-CIV-92 The Mishimoto racing thermostat for the 1992-2000 Honda Civic will promote g...

MODEL#MMTS-CIV-92 The Mishimoto racing thermostat for the 1992-2000 Honda Civic will promote greater cooling efficiency throughout your engine. It will significantly lower high engine temperature produced by modified and upgraded turbo applications. Once the engine is fully warmed up this racing thermostat will open up at a lower temperature than standard thermostats, also allowing the coolant to flow through the engine sooner thus reducing and maintaining cooler engine temperatures. Mi...

(3 variants)

Russell ProClassic II Nylon Fiber Braided Hose ...

Russell ProClassic II Black Nylon Hose -8an Part # 632075, 10 feet Part # 632095, 20 feet ...

Russell ProClassic II Black Nylon Hose -8an Part # 632075, 10 feet Part # 632095, 20 feet Ethanol/Methanol Compatible

(2 variants)

K-Tuned Inline Fuel Filter

30 micron universal inline fuel filter with -6AN or -8AN ends. Can be disassembled for clea...

30 micron universal inline fuel filter with -6AN or -8AN ends. Can be disassembled for cleaning which is recommend every year depending on how much the car is driven.

(2 variants)

K-Tuned OEM Thermostat Housing Plug & Bracket

Applications: All K-series engines Some of you may be interested in deleting the heater hose...

Applications: All K-series engines Some of you may be interested in deleting the heater hoses and core from your K-swapped vehicle. This fitting allows you to remove the oem heater hose pipe and properly block off the opening that is left behind. The o-ring sealed plug is a perfect fit and the special hold down bracket will make certain that the plug stays in place. Those ugly looped hoses are no longer needed.

$17.99 $19.99

Competition Clutch Super Single Clutch Kit

FREE SHIPPING within the Continental US on all Comp Clutches and Flywheels During this time, Inte...

FREE SHIPPING within the Continental US on all Comp Clutches and Flywheels During this time, International customers will need to contact us before placing their orders. Super Single The Competition Clutch Super Single was developed for cars not quite ready for a twin but needing something more then the conventional Stage 4. The Super Single mirrors a twin disc in the fact that they both are a 7.25" set up and have a 4140 forged steel flywheel. Unlike the twin, the Super Single only uses on...

(3 variants)

Energy Suspension Shifter Bushings

Polyurethane Shifter Stabilizer Bushings Replaces distorted and worn out original rubber bushing...

Polyurethane Shifter Stabilizer Bushings Replaces distorted and worn out original rubber bushings even better than new! Maintains consistent shifts, even in harsh racing environments. Allows the shifter to interact with the transmission in proper alignment, resulting in a crisper, more precise shift every time. Made of Energy's HYPERFLEX performance polyurethane to add performance and durability. Fits Models with Manual Transmission Only

$11.99 $14.99

OBD0 to OBD1 Conversion Parts Package

Are you fed up with OBD0? Looking to upgrade to an OBD1 ecu to be able to run the latest OBD1 tu...

Are you fed up with OBD0? Looking to upgrade to an OBD1 ecu to be able to run the latest OBD1 tuning software? If you own a 88-91 Civic/CRX or a 90-91 Integra and are looking to convert to an OBD1 ecu then this package is for you. This savings package contains the following parts at a discounted rate: Chipped OBD1 ECU with basemap chip (VTEC ECU optional) OBD0->OBD1 ECU jumper harness OBD1 distributor (100% NEW, not re-manufactured) OBD0->OBD1 distributor jumper har...

(12 variants)

K-Tuned Shifter Mounting Kit

Looking for a way to mount a K-series shifter in your swapped car? Look no further, here is the n...

Looking for a way to mount a K-series shifter in your swapped car? Look no further, here is the new K-Tuned Shifter Mounting Kit. You will probably notice at a first glance that the base plate is somewhat similar to other competitors. However, we feel very strongly that the overall design and installation details will be what separates this kit from others on the market. The K-Tuned mounting plate is constructed using 3/16î thick billet aluminum. It is then anodized black for a great looking ...

$125.99 $139.99

K-Tuned Passenger Side Radiator Kit

Look no further for a high-quality radiator setup for your K-swapped car! Our K swap experie...

Look no further for a high-quality radiator setup for your K-swapped car! Our K swap experience has shown that rad installs have required either modified brackets or worse, modification to the rad itself. Not anymore! This radiator drops right into the OEM passenger side location and requires zero modifications to make it fit. This kit includes one high quality aluminum rad, a set of custom fitted hoses, clamps, and a high quality fan. FITS: K20A2, K20A3, K20Z1 CYLINDER HEADS

$359.99 $399.99

PLX Kiwi Wifi + iMFD iPhone / iPod touch Interface

The KIWI Wifi + iMFD allows you to view data from your OBDII port on your iPhone or iPod Touch. T...

The KIWI Wifi + iMFD allows you to view data from your OBDII port on your iPhone or iPod Touch. Through the use of additional (not included) iMFD sensor modules, you can also view data from up to 32 additional sensors. Kiwi Wifi is a plug and play wireless device measuring only 2.75 x 1.25 x 0.6 inches. Kiwi Wifi comes attached with a 6 ft OBDII cable for easy installation. It also comes included with a power switch built-in to prevent the need for having to constantly disconnect your unit fr...

$155.00 $249.99

TurboSmart Vee Port Pro Blow Off Valve

DESCRIPTION: Redesigned from the ground up, the new Vee Port PRO is 20% smaller and 33% lighter t...

DESCRIPTION: Redesigned from the ground up, the new Vee Port PRO is 20% smaller and 33% lighter than its predecessor. Featuring a hard anodized aluminum piston, the new Vee Port PRO offers high flow capabilities in a lighter, more compact package. APPLICATION: Simple and effective. Small footprint makes it an ideal choice for larger capacity, space-restricted engines. Preferred choice of drifting and circuit enthusiasts. SUPPLIED WITH: 38mm hose  / weld-on adapter, V-Band clamp, 360 degree sw...

$184.49 $204.99

TurboSmart Race Port 50mm Blow Off Valve

Race Port 50mm BOV Part Numbers: BLUE: TS-0204-1101 BLACK: TS-0204-1102 DESCRIPTION: The largest...

Race Port 50mm BOV Part Numbers: BLUE: TS-0204-1101 BLACK: TS-0204-1102 DESCRIPTION: The largest and the highest-flowing BOV in the Turbosmart range has just been redesigned and now features our unique collar design. 46% lighter and 25% smaller than the product it replaces, the new Race Port provides greater performance through faster turbo spool-up from idle and reduced turbo lag between gears. APPLICATION: Large capacity turbocharger systems and high horsepower engines. Ideal for circuit ...

(3 variants)