USD
  • USD
  • EUR
  • GBP
0

Sales and Specials

Hondata KPRO (Kpro4)

We are an Authorized Hondata Dealer and KPRO Installer which means we can do the modifications to...

We are an Authorized Hondata Dealer and KPRO Installer which means we can do the modifications to the ECU and install the KPRO board into your ECU at our facility.   Xenocron Tuning does not sell Hondata products outside the US If you are an international customer, Please follow this LINK to find your nearest dealer The K-Series Programmable ECU (K-Pro) consists of a hardware modification to any K-Series ECU, plus Windows software which allows you to re-program the ECU and datalog sensors....

(13 variants)

Drag Cartel Modified K-Series Crank Timing gear

Drag Cartel Modified K-Series Crank Timing gear Description:Factory K-Series Timing Chain Gears o...

Drag Cartel Modified K-Series Crank Timing gear Description:Factory K-Series Timing Chain Gears on higher HP turbocharged or all-motor applications have a higher risk of the timing chain gear to break its positioning dowel pin causing your engine to lose timing and potentially do major damage to the engine in this occurrence. The Modified Crank Timing gear solves this problem by modifying the factory gear to be looked in place using a crank key-way

$199.00 $209.00

Drag Cartel K Series Timing Chain Guide

Description: DRAG CARTEL lower timing chain guide provides two functions: Replaces the oem lower...

Description: DRAG CARTEL lower timing chain guide provides two functions: Replaces the oem lower chain guide. Prevents timing chain slippage off the crank pulley chain gear when performing a cam swap. If you're a k-series head, you know about the keeping the timing chain held up when performing a cam swap and how much of a pain it is when it does slip! Features: Fits both K20 and K24 engines Prevents timing chain from skipping teeth Secures chain in case of timing tensioner failure Easy bo...

$54.00 $59.00

DIY - Swapbox K-Series Immobilizer Disable

This is the "Swapbox" K-Series Immobilizer Delete box designed for use when swapping a stock K-Se...

This is the "Swapbox" K-Series Immobilizer Delete box designed for use when swapping a stock K-Series motor into your vehicle. The unit has immo-bypass AND multiplexer error removed so it should run like a stock vehicle for you. The connections are easy and simple and instructions are included with the unit. These items are IN STOCK and shipping immediately! Please call with any questions! Swapbox-K comes with: Mobilizer Module, two splice terminals and two precrimped Contacts for the connect...

(5 variants)

Acuity K-Series Hall Effect TPS Sensor Upgrade

Seasoned mechanics and gear heads know that more often than not, OEM replacement parts are more r...

Seasoned mechanics and gear heads know that more often than not, OEM replacement parts are more reliable than aftermarket parts. Unfortunately, anyone who has searched for an OEM replacement for a ACURA RSX-S or Civic Si throttle position sensor (TPS) knows that Acura/Honda only sells them as part of the throttle body with a steep list price of over $800 USD. Aftermarket alternatives have existed for years, but all that was available until now were poorly made copies and expensive adapted ver...

$95.00 $99.00

K-Tuned Thermostat Housing Plug & Bracket

Applications: All K-series engines Some of you may be interested in deleting the heater hoses an...

Applications: All K-series engines Some of you may be interested in deleting the heater hoses and core from your K-swapped vehicle. The K-Tuned T-stat plug and bracket allows you to remove the oem heater hose pipe and properly block off the opening that is left behind. The o-ring sealed plug is a perfect fit and the special hold down bracket will make certain that the plug stays in place. Ugly looped hoses are no longer needed.

$17.99 $19.99

K-Tuned Billet Oil Cap

After a countless number of requests, the K-Tuned Billet Oil Cap is now available. Note right awa...

After a countless number of requests, the K-Tuned Billet Oil Cap is now available. Note right away that this oil cap is not just specific to the K-Series engine, it will fit all Honda engines. For a design, we weren't trying to reinvent the wheel here, so we kept things very simple. Starting with 6061 billet aluminum blank, we threaded the bottom, machined a groove for an o-ring seal, cut out the center and placed 7 moon cuts around the outer circumference for grip when loosening or tightenin...

(6 variants)

K-Tuned Swivel Neck Fan Switch Plug

Applications: For use with K-Tuned Swivel Neck T-stat If aren't using the OEM fan switch on your ...

Applications: For use with K-Tuned Swivel Neck T-stat If aren't using the OEM fan switch on your K-Tuned Swivel Neck T-stat, you will need this plug to block off the open port.

$5.39 $5.99

Haltech PLATINUM PRO Plugin ECU EP3/RSX

Honda Civic EP3 / Acura RSX   Part # HT-055047 Features: • Direct plug and play replacement of ...

Honda Civic EP3 / Acura RSX   Part # HT-055047 Features: • Direct plug and play replacement of the OEM ECU, no re-wiring necessary. • Uses the cars factory sensors • Supports Honda’s VTEC and VTC Control • Supports Sequential Injection (peak and hold) and Direct fire ignition • Windows 2000, XP, Vista, Windows 7 compatible software • Real time programming, instant hesitation free adjustment while engine is running • Fully user definable 32 x 32 mapping • Tuning via Volumetric Efficiency (VE...

(3 variants)

K-Tuned K24/K20Z3 Upper Coolant Housing

Applications: K20Z3 and most K24 heads (Excluding K24A1) Please note this will not work with any...

Applications: K20Z3 and most K24 heads (Excluding K24A1) Please note this will not work with any K24Z-series and K24Y-series engines Here is the K-Tuned Upper Coolant Housing. With applications for both K20 and K24 engines, these housings will provide several unique advantages over the stock units. The hose outlet on the K-Tuned housing pivots slightly, allowing approximately 15 degrees of angle adjustment. This is helpful when compared to the fixed the factory outlet that always seems to p...

(12 variants)

K-Tuned Billet RSX Shifter Base Plate

Fits: 1994-2001 Acura Integra, 1988-2000 Honda Civic The K-Tuned Billet Shifter Base Plate is des...

Fits: 1994-2001 Acura Integra, 1988-2000 Honda Civic The K-Tuned Billet Shifter Base Plate is designed to install an RSX Type-S or comparable shifter box without cutting a hole in the exhaust tunnel of the chassis. This setup is preferred by many racers, esp. road course racers, because it mounts the shifter higher in the vehicle, keeping it closer to the driver and the steering. It also leaves a lot more room below the car for large exhaust systems. The Shifter Base Plate was designed to rou...

$116.99 $129.99

K-Tuned Upper Coolant Housing (Basic)

Applications: K20A, K20A2, K20A3, K20Z1, K24A1 cylinder heads. Here is the K-Tuned Upper Coolant...

Applications: K20A, K20A2, K20A3, K20Z1, K24A1 cylinder heads. Here is the K-Tuned Upper Coolant Housing. With applications for both K20 and K24 engines, these housings will provide several unique advantages over the stock units. The hose outlet on the K-Tuned housing pivots slightly, allowing approximately 15 degrees of angle adjustment. This is helpful when compared to the fixed the factory outlet that always seems to put the upper rad hose in the path of the intake piping. There are three...

(2 variants)

K-Tuned K24 Intake Manifold Coolant Adapter

The K24 Intake Manifold Adapter is a simple and easy way to install K20 style manifold on K24 hea...

The K24 Intake Manifold Adapter is a simple and easy way to install K20 style manifold on K24 heads. The recirculation fitting on K24s is typically part of the intake manifold which isn’t on K20 intake manifolds. We have designed the adapter to work with all K24 heads including the K24Z-Series (R40) heads. This can also be used to install K20 manifolds or cut RBC manifolds on 9th gen Civic si as the water bypass is slightly different and you will not need an intake manifold adapter when usi...

$89.99 $99.99

K-Tuned Timing Tensioner Cover

Application: All K20 and K24s (Does not fit K24Z motors) The K-Tuned Tensioner Cover Plate is ...

Application: All K20 and K24s (Does not fit K24Z motors) The K-Tuned Tensioner Cover Plate is designed with a simple o-ring seal that is set into a machined groove on the back of the cover. This o-ring seal design makes timing chain tensioner checks and changes much faster and easier because it completely eliminates the need for messy sealer which we all know is a pain to clean off. Worse yet, the OEM stamped steel cover plate often needs to be replaced because it usually bends when it is ...

$35.99 $39.99

K-Tuned Water Plate w/ Alternator Brackets and ...

Applications: All K-series engines except K24Z and K24Y Series Engines Kit includes water plate, ...

Applications: All K-series engines except K24Z and K24Y Series Engines Kit includes water plate, hardware, alternator brackets, belt, and custom water plate fitting. The first part developed by ETD Racing, now K-Tuned, was the electric water plate kit. Since our release we have made several advances and improvements to the design. In recent years the market has seen several knock offs. While others are happy simply try and copy our design we strive to always improve. Recently we released our ...

$269.99 $299.00

K-Tuned OEM/Street Shifter Cables

Shifter cables have been a high demand part in the K-Series community for a few years now. If you...

Shifter cables have been a high demand part in the K-Series community for a few years now. If you are putting together a K-swapped car and didn’t get the shifter cable set with your engine, you can either try to find them used or get them brand new from a local Honda/Acura dealer. The problem with the dealership is they can be expensive and occasionally, they are on backorder which means there is a wait time to get them in hand. K-Tuned OEM-Spec / Street Shifter Cables are a strong and cost e...

$251.99 $279.00