USD
  • USD
  • EUR
  • GBP
0

Sales and Specials

Innovate MTX-L PLUS: Wideband Air/Fuel Ratio Gauge

MTX-L: Wideband Air/Fuel Ratio Gauge ALL-IN-ONE (Wideband Controller integrated into the...

MTX-L: Wideband Air/Fuel Ratio Gauge ALL-IN-ONE (Wideband Controller integrated into the MTX-L gauge housing) The new Innovate Motorsports Digital MTX Series Air/Fuel Ratio Gauge utilizes the only 100% digital Wideband air/fuel ratio technology on the market! The award-winning patented DirectDigital™ technology used is faster and more accurate than common “UEGO” gauges and is now more affordable! In addition, the gauge features a water resistant casing, interchangeable faceplates and...

$186.00 $219.00

OBD2 B16/GSR/ITR VTEC 1996-2001 (TD-84U)

TD-84U, TD-81U, TD-86U & TD-87U OBD2 B16, GSR and ITR Engines. 10-pin Distributor plug. The...

TD-84U, TD-81U, TD-86U & TD-87U OBD2 B16, GSR and ITR Engines. 10-pin Distributor plug. These feature all new parts and there is no core required! They come complete with a cap and rotor, ready to install and run. High quality components ensure OEM reliability and performance. These distributors are an excellent value and perfect as OEM replacements.

$205.00 $235.00

AEM Map Sensor

For those looking to run up to ~58psi of boost. The 3.5 Bar Sensor (30-2130-50) will support roug...

For those looking to run up to ~58psi of boost. The 3.5 Bar Sensor (30-2130-50) will support roughly ~37 psi of Boost and the 5.0 Bar Sensor (30-2130-75) will support roughly ~58 psi of Boost. This sensor is a built in configuration to the AEM Plug and Play system and in many Honda ROM Editor Tuning Softwares like (Hondata S300, Neptune, eCtune, Crome, etc.) Consult your tuner for installation instructions or guidance based on your setup specs.

(3 variants)

HondaRulez Coil On Plug (COP) Mini Complete Kit

The HondaRulez COP mini complete kit with RaceSpec Harness for OBD1 Honda Civic/Integra ECU's. Th...

The HondaRulez COP mini complete kit with RaceSpec Harness for OBD1 Honda Civic/Integra ECU's. The HondaRulez Coil-on-plug kit is a tuning solution for removing the OBD1 Distributors Ignitor and Coil (which tend to fail) and utilizing Honda K-Series Coils directly into each cylinder. The HondaRulez kit is able to be used on ANY OBD1 Civic/Integra ECU, even the stock ECU, plus it fits inside of the ECU Case and Cover.The hardware installs inside the OBD1 ECU, and the harness (produced by Race ...

(2 variants)

Innovate MTX-D: Oil Pressure & Temperature

ONE GAUGE! TWO FUNCTIONS! The new Innovate Motorsports MTX Digital Series “Dual Function” Gauges ...

ONE GAUGE! TWO FUNCTIONS! The new Innovate Motorsports MTX Digital Series “Dual Function” Gauges are now available!  The 2 1/16” (52mm) gauges feature a water resistant casing, interchangeable faceplates and bezels, locking connectors for simplified installation, and MTS serial connections used to connect with other Innovate devices for logging to your PC, *iPhone, or LM-2. Available color configurations for each kit shown above. *OT-2 for logging to your Apple device not included.  LogWorks ...

$149.49 $219.00

OBD1 B16/GSR/ITR VTEC 1992-1995 (TD-44U)

TD-44U / TD-68U Any GSR (b18c GSR), Any B16 (b16a), Any ITR (b18c5/R). These feature all new pa...

TD-44U / TD-68U Any GSR (b18c GSR), Any B16 (b16a), Any ITR (b18c5/R). These feature all new parts and there is no core required! They come complete with a cap and rotor, ready to install and run. High quality components ensure OEM reliability and performance. These distributors are an excellent value and perfect as OEM replacements.

$200.00 $215.00

OBD1 B16/GSR/ITR VTEC OE Equivalent (TD-44U)

OE Equivalent OBD1 TD44 Distributor This distributor is our solution to higher HP Honda's that ne...

OE Equivalent OBD1 TD44 Distributor This distributor is our solution to higher HP Honda's that need a better overall distributor.  The components inside are all Japanese and are much higher quality and resistant to heat.  While the other TD44 distributors we carry are great as a replacement on stock vehicles, this is the distributor you want if you are making power and need consistency at the track.  1 year manufacturer replacement warranty

$249.00 $279.00

Innovate PSB-1 PowerSafe Boost & Air/Fuel Ratio...

The PowerSafe gauges combine our patented DirectDigital™ O² sensor control technology with applic...

The PowerSafe gauges combine our patented DirectDigital™ O² sensor control technology with application specific sensors, an OLED display, and a smart safety override circuit for your high performance vehicle. Our PowerSafe technology can disable your factory or aftermarket boost control solenoid forcing the system to spring pressure. In nitrous applications, our PowerSafe technology will disable your nitrous solenoid to keep your engine safe. The PowerSafe gauges offer the looks, safety and p...

$272.99 $349.00

DIY - Swapbox K-Series Immobilizer Disable

This is the "Swapbox" K-Series Immobilizer Delete box designed for use when swapping a stock K-Se...

This is the "Swapbox" K-Series Immobilizer Delete box designed for use when swapping a stock K-Series motor into your vehicle. The unit has immo-bypass AND multiplexer error removed so it should run like a stock vehicle for you. The connections are easy and simple and instructions are included with the unit. These items are IN STOCK and shipping immediately! Please call with any questions! Swapbox-K comes with: Mobilizer Module, two splice terminals and two precrimped Contacts for the connect...

(5 variants)

Accel Super Coil K-Series Performance Coil (Set...

Accel Super Coil This is a set of (4) high performance replacement coils for K-Series Engines.

Accel Super Coil This is a set of (4) high performance replacement coils for K-Series Engines.

$179.10 $199.00

Haltech Wideband Sensor ONLY

Haltech Wideband O2 Sensor only - Bosch LSU 4.2 (pre-terminated with 6 Pin DT connector)

Haltech Wideband O2 Sensor only - Bosch LSU 4.2 (pre-terminated with 6 Pin DT connector)

$125.00

Haltech 3 Port Boost Solenoid

Boost Control Solenoid - 33Hz (inc hose fittings, rubber isolated mount and matching DTM 2 plug a...

Boost Control Solenoid - 33Hz (inc hose fittings, rubber isolated mount and matching DTM 2 plug and pins set)

$112.00 $118.00

Haltech ELITE DTM4 CAN to OBDII Cable

Haltech Elite DTM4 CAN to OBDII (Vehicle side) Cable 2m (6Ft)

Haltech Elite DTM4 CAN to OBDII (Vehicle side) Cable 2m (6Ft)

$37.00 $39.00

Haltech PS1000 Mitsubishi EVO 8 PNP Harness

Haltech PS1000 Patch Loom Kit - EVO 8 (5-speed) *All Patch Loom Kits now include an air temp sens...

Haltech PS1000 Patch Loom Kit - EVO 8 (5-speed) *All Patch Loom Kits now include an air temp sensor with plug and pins

$1,472.00 $1,549.00

Haltech CAN HUB-Mini 3 Port

CAN HUB-Mini 3 Port - for use with up to two CAN devices (includes 1 x White 300mm/12" CAN cable)

CAN HUB-Mini 3 Port - for use with up to two CAN devices (includes 1 x White 300mm/12" CAN cable)

$67.00 $70.00

AEM V2 Water/Methanol Injection Kit, Standard C...

***This item is typically ordered as needed, please contact us to check availability before placi...

***This item is typically ordered as needed, please contact us to check availability before placing your order*** Part Number: 30-3300 - V2 Water/Methanol Injection Kit, Standard Controller - Internal MAP with 35psi max, 200psi WM Pump, 1 Gallon Reservoir, Conductive Fluid Level Sensor THE AEM WATER/METHANOL INJECTION SYSTEM ADVANTAGE Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet ...

$467.03 $609.09