USD
  • USD
  • EUR
  • GBP
0

Sales and Specials

K-Tuned Swivel Neck Fan Switch Plug

Applications: For use with K-Tuned Swivel Neck T-stat If aren't using the OEM fan switch on your ...

Applications: For use with K-Tuned Swivel Neck T-stat If aren't using the OEM fan switch on your K-Tuned Swivel Neck T-stat, you will need this plug to block off the open port.

$5.39 $5.99

Mishimoto Honda B16 Silicone Hose Kit

Mishimoto Honda/Acura B16 radiator hose kits are made with a dual layer combining high grade sili...

Mishimoto Honda/Acura B16 radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with designed and engineered for a direct OEM fit. The perfect replacement for stock B16 hoses. Part #MMHOSE-CIV-92B16 Please contact us for other colors. Picture is generic and may not represent the exact product listed.

$96.00 $160.00

Koyo Rad Cap #SK-C13

Part Number: SK-C13 (red) fits all Koyorad radiators that have filler necks Extract every ounce ...

Part Number: SK-C13 (red) fits all Koyorad radiators that have filler necks Extract every ounce of cooling efficiency from Koyorad All Aluminum Performance Radiators with a genuine Koyorad Hyper Cap! This Koyorad Hyper Cap withstands an increased valve pressure rating of 1.3kgf/cm2 (1.3 bar) (18.9 psi) (130 kPa) which increases the boiling point of water and relieves high performance engines of excessive heat. A genuine Koyorad Hyper Cap is recommended for use with every Koyorad All Aluminum...

$25.00 $30.00

Civic KOYO Radiator

This half-sized rad with a 2 1/16" thick core is perfect for those who need extra cooling ability...

This half-sized rad with a 2 1/16" thick core is perfect for those who need extra cooling ability or just want extra protection for their motor. Here are just some of the features of this quality product: * Koyo Radiators are fully polished to a mirror finish * Koyo Radiators provide 20% to 30% more cooling than standard radiators * Handles high revving, high performance motors * Koyo Radiators are perfect for Turbo Charged, Super Charged & Nitros Oxide equipped engines * Made from aircra...

$240.00 $288.00

Mishimoto 06+ Civic Si Hose Kit (Blue)

Mishimoto silicone Civic SI radiator hose kits are made with a dual layer combining high grade si...

Mishimoto silicone Civic SI radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit! Perfect for your Honda Civic.       AVAILABLE IN BLUE ONLY PRICE INCLUDES SHIPPING!!!

$75.00 $125.00

Mishimoto '02-'06 Acura RSX Hose Kit (Blue)

Mishimoto Acura RSX radiator hose kits are made with a dual layer combining high grade silicone a...

Mishimoto Acura RSX radiator hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with designed and engineered for a direct OEM fit. The perfect replacement for stock Acura RSX hoses. AVAILABLE IN BLUE ONLY PRICE INCLUDES SHIPPING!!!

$85.00 $90.00

K-Tuned B/D Series Thermostat Housing

Applications: All 1988-2001 Honda B-Series engines and all 1988-2000 D-Series engines (Except D16...

Applications: All 1988-2001 Honda B-Series engines and all 1988-2000 D-Series engines (Except D16Z6). The K-Tuned B/D Thermostat Housing was developed to offer B and D Series engine owners a few more options with their cooling system setups. The CNC machined billet housing is a direct replacement for the oem unit and mounts in the same factory position, with the rad outlet following the original and slightly upward outlet angle. The number one feature of this design is the threaded water out...

(6 variants)

K-Tuned Thermostat Housing Plug & Bracket

Applications: All K-series engines Some of you may be interested in deleting the heater hoses an...

Applications: All K-series engines Some of you may be interested in deleting the heater hoses and core from your K-swapped vehicle. The K-Tuned T-stat plug and bracket allows you to remove the oem heater hose pipe and properly block off the opening that is left behind. The o-ring sealed plug is a perfect fit and the special hold down bracket will make certain that the plug stays in place. Ugly looped hoses are no longer needed.

$17.99 $19.99

K-Tuned 8th Gen Si (06-11 Civic Si) Silicone Ra...

Applications: 06-11 Civic (Si model only) K-Tuned 8th Gen Civic SI Radiator Hoses are designed as...

Applications: 06-11 Civic (Si model only) K-Tuned 8th Gen Civic SI Radiator Hoses are designed as a direct replacement for your worn out and cheap factory hoses. These upgraded hoses will fit perfectly with the OEM radiator and most 8th Gen Civic SI specific aftermarket units. K-Tuned rad hoses are made from strong, heat resistant, high grade, 4-ply reinforced silicone. The inner layers of silicone are red and the outer layer is finished in black with white K-Tuned logos at each end. Many oth...

$77.49 $89.99

K-Tuned K24/K20Z3 Upper Coolant Housing

Applications: K20Z3 and most K24 heads (Excluding K24A1) Please note this will not work with any...

Applications: K20Z3 and most K24 heads (Excluding K24A1) Please note this will not work with any K24Z-series and K24Y-series engines Here is the K-Tuned Upper Coolant Housing. With applications for both K20 and K24 engines, these housings will provide several unique advantages over the stock units. The hose outlet on the K-Tuned housing pivots slightly, allowing approximately 15 degrees of angle adjustment. This is helpful when compared to the fixed the factory outlet that always seems to p...

(12 variants)

K-Tuned RSX/EP3 Silicone Radiator Hose Kit

Applications: 02-06 RSX (all models) 02-05 EP3 Civic K-Tuned RSX/EP3 Radiator Hoses are designed...

Applications: 02-06 RSX (all models) 02-05 EP3 Civic K-Tuned RSX/EP3 Radiator Hoses are designed as a direct replacement for your worn out and cheap factory hoses. These upgraded hoses will fit perfectly with the OEM radiator and most RSX/EP3 specific aftermarket units. K-Tuned rad hoses are made from strong, heat resistant, high grade, 4-ply reinforced silicone. The inner layers of silicone are red and the outer layer is finished in black with white K-Tuned logos at each end. Many other app...

$69.74 $77.49

K-Tuned Oil Cooler Hoses

K-Tuned Oil Cooler Hoses.

K-Tuned Oil Cooler Hoses.

$31.49 $34.99

K-Tuned Coolant Recirculation Hose

K-Tuned Coolant Recirculation Hose

K-Tuned Coolant Recirculation Hose

$22.49 $24.99

K-Tuned Heater Hose Adapter Kit (w/ hose & clamps)

Applications: EG, DC2, EK Here is our K-Tuned heater hose adapter in a kit. This kit includes o...

Applications: EG, DC2, EK Here is our K-Tuned heater hose adapter in a kit. This kit includes our adapter with quality high temp rated silicone hose, clamps and billet hose separator. Sold altogether for a perfect pain-free install. When doing a K-Swap why not replace those old heater hoses for some added reliability.

$44.99 $49.99

K-Tuned B16/B18C5 Upper Coolant Housing

Application: B16 / B18C5(Type R) Heads K-Tuned is known for its innovative and popular cooling ...

Application: B16 / B18C5(Type R) Heads K-Tuned is known for its innovative and popular cooling components for k-series applications. Countless requests have brought forth the new b-series line. The B16/B18C5 (Type R) Upper Coolant Housing offers a versatility you won't get anywhere else. Begin with selecting a basic setup or setup with optional filler. Next you can select the inlet style/size being used whether its standard silicone hoses or -AN fittings. On the filler neck option the fille...

(12 variants)

K-Tuned B18C1 Upper Coolant Housing

Application: B18C1 / GSR Heads K-Tuned is known for its innovative and popular cooling componen...

Application: B18C1 / GSR Heads K-Tuned is known for its innovative and popular cooling components for k-series applications. Countless requests have brought forth the new b-series line. The B18C1/GSR Upper Coolant Housing offers a versatility you won't get anywhere else. Begin with selecting a basic setup or setup with optional filler. Next you can select the inlet style/size being used whether its standard silicone hoses or -AN fittings. On the filler neck option the filler neck and overfl...

(12 variants)