USD
  • USD
  • EUR
  • GBP
0

Rywire

Rywire OBD1 Tuner Harness

This harness allows you to tap into all major sensors, power (12v) and ground on the ECU as well ...

This harness allows you to tap into all major sensors, power (12v) and ground on the ECU as well as send a Wideband voltage signal to the ECU without splicing into the customers harness. One side plugs into the stock OBD1 harness ECU plugs, the other side plugs into an OBD1 ECU. (pass thru harness) As a tuner, this can easily save you 20 minutes of wiring/setup time and also tear down (no heat shrinking or electrical tape on wires you had to tap into. Personally I use this to power my LM-1 wh...

$145.00

Rywire K-Series Swap Harnesses

Rywire K-Series Chassis Adapter This adapter is made to allow the installation of a K-Series engi...

Rywire K-Series Chassis Adapter This adapter is made to allow the installation of a K-Series engine with the 02-04 K20 engine harness. It will also work for our all RYWIRE K-Series engine harnesses. K1 & K2 types! This wire harness connects your K-Series engine harness to your chassis interior harness while adding the E-plug and all its functions. This harness is primarily made for a K-Pro or Re-Flashed ECU but can be used with a stock RSX ECU provided you have bypassed the immobilizers a...

(10 variants)

OBD0 - OBD1 Distributor Adapter

This will convert Non-OBD (OBD0) 88-91 MPFI style distributor plugs to the 92-95 style OBD1 plugs...

This will convert Non-OBD (OBD0) 88-91 MPFI style distributor plugs to the 92-95 style OBD1 plugs. Note: To use a OBD1 Distributor, you must also be using an OBD1 or 2 ECU. (OBD Compliant) Connector plugs may be used parts, but we construct the wire harnesses ourselves in-house

$50.00

Rywire OBD1 to OBD2 10-pin Distributor Adapter

This will convert a OBD1 Distributor plug set to match a OBD2 10-pin style Distributor. OBD2 10-p...

This will convert a OBD1 Distributor plug set to match a OBD2 10-pin style Distributor. OBD2 10-pin Distributor Style Engines include: * All 1996-01 B-Series engines * 1996-1998 Honda Civic D-Series engines.

$25.00

Rywire OBD2b D-Series (8-pin) to OBD1 Distribut...

This will convert a OBD2 8-pin Distributor plug to match a OBD1 Distributor. OBD2 8-pin Distribu...

This will convert a OBD2 8-pin Distributor plug to match a OBD1 Distributor. OBD2 8-pin Distributor Style Engines are from: * 1999-2000 Honda Civic (D-series engine only, not the Si model)

$50.00

Rywire OBD2 10-pin to OBD1 Distributor Adapter

This will convert a OBD2 10-pin Distributor plug to match a OBD1 Distributor. OBD2 10-pin Distrib...

This will convert a OBD2 10-pin Distributor plug to match a OBD1 Distributor. OBD2 10-pin Distributor Style Vehicles include: * 2000-2001 Acura Integra * 1996-1998 Honda Civic * 1999-2000 Honda Civic Si (B-series engines only)

$25.00

OBD0 MPFI to DOHC ZC Distributor Adpater

This will convert a Non-OBD (OBD0) 88-91 7-pin MPFI distributor plug to the 5-pin distributor plu...

This will convert a Non-OBD (OBD0) 88-91 7-pin MPFI distributor plug to the 5-pin distributor plug with 2-pin External CPS plug. This is found on the DOHC ZC. FAQ Q: Will this work on a dx/std civic? A: No, this is only for a MPFI chassis.

$50.00