USD
  • USD
  • EUR
  • GBP
0

K-Tuned

K-Tuned Thermostat Housing Plug & Bracket

Applications: All K-series engines Some of you may be interested in deleting the heater hoses an...

Applications: All K-series engines Some of you may be interested in deleting the heater hoses and core from your K-swapped vehicle. The K-Tuned T-stat plug and bracket allows you to remove the oem heater hose pipe and properly block off the opening that is left behind. The o-ring sealed plug is a perfect fit and the special hold down bracket will make certain that the plug stays in place. Ugly looped hoses are no longer needed.

$17.99 $19.99

K-Tuned Swivel Neck Fan Switch Plug

Applications: For use with K-Tuned Swivel Neck T-stat If aren't using the OEM fan switch on your ...

Applications: For use with K-Tuned Swivel Neck T-stat If aren't using the OEM fan switch on your K-Tuned Swivel Neck T-stat, you will need this plug to block off the open port.

$5.39 $5.99

K-Tuned Billet Oil Cap

After a countless number of requests, the K-Tuned Billet Oil Cap is now available. Note right awa...

After a countless number of requests, the K-Tuned Billet Oil Cap is now available. Note right away that this oil cap is not just specific to the K-Series engine, it will fit all Honda engines. For a design, we weren't trying to reinvent the wheel here, so we kept things very simple. Starting with 6061 billet aluminum blank, we threaded the bottom, machined a groove for an o-ring seal, cut out the center and placed 7 moon cuts around the outer circumference for grip when loosening or tightenin...

(6 variants)

K-Tuned Water Plate w/ Alternator Brackets and ...

Applications: All K-series engines except K24Z and K24Y Series Engines Kit includes water plate, ...

Applications: All K-series engines except K24Z and K24Y Series Engines Kit includes water plate, hardware, alternator brackets, belt, and custom water plate fitting. The first part developed by ETD Racing, now K-Tuned, was the electric water plate kit. Since our release we have made several advances and improvements to the design. In recent years the market has seen several knock offs. While others are happy simply try and copy our design we strive to always improve. Recently we released our ...

$269.99 $299.00

K-Tuned Upper Coolant Housing (w/ Filler & Hose...

Here is the K-Tuned Upper Coolant Housing. With applications for both K20 and K24 engines, these...

Here is the K-Tuned Upper Coolant Housing. With applications for both K20 and K24 engines, these housings will provide several unique advantages over the stock units. The hose outlet on the K-Tuned housing pivots slightly, allowing approximately 15 degrees of angle adjustment. This is helpful when compared to the fixed the factory outlet that always seems to put the upper rad hose in the path of the intake piping. This housing features a 1.25” rad hose outlet for use with regular rubber...

(3 variants)

K-Tuned Upper Coolant Housing (Basic)

Applications: K20A, K20A2, K20A3, K20Z1, K24A1 cylinder heads. Here is the K-Tuned Upper Coolant...

Applications: K20A, K20A2, K20A3, K20Z1, K24A1 cylinder heads. Here is the K-Tuned Upper Coolant Housing. With applications for both K20 and K24 engines, these housings will provide several unique advantages over the stock units. The hose outlet on the K-Tuned housing pivots slightly, allowing approximately 15 degrees of angle adjustment. This is helpful when compared to the fixed the factory outlet that always seems to put the upper rad hose in the path of the intake piping. There are three...

(2 variants)

K-Tuned Universal A/C & P/S Eliminator Kit

Fits all K20/24 engines Eliminates P/S and A/C. CNC machined 6061 billet aluminum. Clear anodize...

Fits all K20/24 engines Eliminates P/S and A/C. CNC machined 6061 billet aluminum. Clear anodized for durability. Pulley is hard anodized. NTN bearing (identical to oem Honda bearing) Tension is fully adjustable. Includes all hardware. Allows proper clearance for the EF chassis. The billet alternator pulley now comes with all K-Tuned Pulley kits You no longer need to buy the EP3 idler pulley setup from Honda to complete a K-series engine swap in your car. The K-Tuned pulley kit eliminates b...

$197.99 $219.99

K-Tuned Timing Tensioner Cover

Application: All K20 and K24s (Does not fit K24Z motors) The K-Tuned Tensioner Cover Plate is ...

Application: All K20 and K24s (Does not fit K24Z motors) The K-Tuned Tensioner Cover Plate is designed with a simple o-ring seal that is set into a machined groove on the back of the cover. This o-ring seal design makes timing chain tensioner checks and changes much faster and easier because it completely eliminates the need for messy sealer which we all know is a pain to clean off. Worse yet, the OEM stamped steel cover plate often needs to be replaced because it usually bends when it is ...

$35.99 $39.99

K-Tuned K24/K20Z3 Upper Coolant Housing

Applications: K20Z3 and most K24 heads (Excluding K24A1) Please note this will not work with any...

Applications: K20Z3 and most K24 heads (Excluding K24A1) Please note this will not work with any K24Z-series and K24Y-series engines Here is the K-Tuned Upper Coolant Housing. With applications for both K20 and K24 engines, these housings will provide several unique advantages over the stock units. The hose outlet on the K-Tuned housing pivots slightly, allowing approximately 15 degrees of angle adjustment. This is helpful when compared to the fixed the factory outlet that always seems to p...

(12 variants)

K-Tuned K24 Intake Manifold Coolant Adapter

The K24 Intake Manifold Adapter is a simple and easy way to install K20 style manifold on K24 hea...

The K24 Intake Manifold Adapter is a simple and easy way to install K20 style manifold on K24 heads. The recirculation fitting on K24s is typically part of the intake manifold which isn’t on K20 intake manifolds. We have designed the adapter to work with all K24 heads including the K24Z-Series (R40) heads. This can also be used to install K20 manifolds or cut RBC manifolds on 9th gen Civic si as the water bypass is slightly different and you will not need an intake manifold adapter when usi...

$89.99 $99.99

K-Tuned K20/24 Universal Swivel Neck Thermostat...

K-Tuned has the solution to your lower rad hose problems. Some of the motors we have received cam...

K-Tuned has the solution to your lower rad hose problems. Some of the motors we have received came with an OEM plastic water neck broken. Until now, you could only order a replacement part from Honda/Acura. Problem is they only sell the housing complete with the thermostat, which is pretty expensive and it doesn’t provide any real benefits. If your housing isn’t broken then you still have to get the right hose, with the right angles and mate it to the radiator. After that, you have to fig...

$152.99 $169.99

K-Tuned Vented Valve Cover

Application: K20A and K24A style heads.  Does not fit K24Z Series or K20C Series  Availabl...

Application: K20A and K24A style heads.  Does not fit K24Z Series or K20C Series  Available in Raw (Uncoated) or Wrinkle Black. Pre-orders will be open till June 15th (This date may change as supply is limited). Pre-orders are expected to ship on June 29th (This date may change slightly). Regular release for anyone who does not pre-order will be expected August 1st. New vented valve cover perfect for boosted or high HP K-Series Cars. Features two -10 ports on the front, two -...

(2 variants)

K-Tuned ZDX Throttle Body Adapter

Application: ZDX Throttle Body on PRB or RBC bolt pattern manifolds. 2006-2015 Civic Si , 2004+ A...

Application: ZDX Throttle Body on PRB or RBC bolt pattern manifolds. 2006-2015 Civic Si , 2004+ Acura TSX ZDX Throttle Body Part Number - 16400-RYE-A11 The Honda ZDX throttle body is a great upgrade for DBW (Drive By Wire) cars looking to increase airflow. It offers OEM reliability at an affordable price. Our adapter makes it easy and simple to bolt it up to any manifold with PRB/PRC or RBC/RRC bolt pattern. We've incorporated several great features to make the process simple and offer best f...

(2 variants)

K-Tuned Water Pump Mount Bracket

Application: K-Tuned Water Pump and all K-Series Blocks Including K24Z Series The water pump mou...

Application: K-Tuned Water Pump and all K-Series Blocks Including K24Z Series The water pump mount bracket is a nice and simple way to mount your K-Tuned Water Pump on your K-Series block. Please note some blocks may require tapping the hole as not all are threaded from Honda. This water pump mount fits our K-Tuned Water pump as well as Meziere WP136S. (May fit other pumps as well)

$53.99 $59.99

K-Tuned Upper Coolant Housing (w/Built in Fille...

Applications: K20A, K20A2, K20A3, K20Z1, K24A1 cylinder heads. We've taken input from guys runnin...

Applications: K20A, K20A2, K20A3, K20Z1, K24A1 cylinder heads. We've taken input from guys running big turbo setups on this one. The integrated filler now clears up more room for big turbo setups. The filler neck comes off the top of the housing and can be used to relocate the radiator cap to a higher point on the engine itself. The new location is the highest point of the cooling system and allows air pockets to easily escape during the coolant bleeding process. The Filler Neck is also avail...

(3 variants)

K-Tuned Universal Swivel Neck Thermostat Housing

Applications: Fits all K-series engines NEED A REPLACEMENT T-STAT? Stant part # 13958 (180 deg) K...

Applications: Fits all K-series engines NEED A REPLACEMENT T-STAT? Stant part # 13958 (180 deg) K-Tuned has the solution to your lower rad hose problems. Some of the motors we have received came with the oem plastic water neck broken. Until now, you could only order a replacement part from Honda/Acura. Problem is they only sell the housing complete with the thermostat, which is pretty expensive and it doesn't provide any real benefits. If your housing isn't broken then you still have to get t...

(8 variants)