USD
  • USD
  • EUR
  • GBP
0

Hondata Accessories

These are any products that would be considered Accessories

Hondata 4 Port Boost Controller

How much does the Hondata 4 Port Boost Controller cost? $100 Overview The Hondata 4 port boost co...

How much does the Hondata 4 Port Boost Controller cost? $100 Overview The Hondata 4 port boost controller precisely directs pressure to the top and bottom of your waste-gate diaphragm. It allows much lower waste-gate spring pressure for better low gear boost control and perfect high gear, high boost control.  A 10 lb waste-gate spring will enable 50+ psi of boost Better spool-up and mid range power Better duty cycle control For use with: S300 K-Pro FlashPro 2006-11 Civic Si, FlashPro S2000...

$99.00

Hondata 4 Bar MAP Sensor

The Hondata 4 bar map sensor is a plug compatible replacement for the Honda factory MAP sensor. I...

The Hondata 4 bar map sensor is a plug compatible replacement for the Honda factory MAP sensor. It is a direct replacement for the B, D, H and F series Honda engines. This plug in sensor takes less than 60 seconds to install and eliminates the risk of sensor damage that often occurs when attempting to wire in other types of MAP sensors. Hondata 4 bar Map sensors B, D, H, F-series (00-05 S2000) K-series 06+ S2000 & R18 Civic Overview The Hondata 4 bar map sensor is a plug c...

(3 variants)

Hondata OBD1 Clear ECU Cover

The S300 ECU cover is a beautiful and precision machined lid that replaces your old worn out ECU ...

The S300 ECU cover is a beautiful and precision machined lid that replaces your old worn out ECU cover. The transparent cover allows you to display your ECU's internal components and easily read status lights on the Hondata circuit boards. Fits USDM or Rectangle Shape ECUs

$25.00

Hondata Strain Gauge

The Hondata Strain Gauge is a gearshift mounted strain gauge and remote strain gauge amplifier wh...

The Hondata Strain Gauge is a gearshift mounted strain gauge and remote strain gauge amplifier which signals the ECU to cut the engine when the gear lever is moved. This enables very quick no lift shifts with dog engagement transmissions. The Strain Gauge works by using a strain elements in the gear shift knob to measure the force on the knob, via accurately measuring the strain on an aluminum insert between the gear lever and gear knob. The aluminum insert has two bonded Omega® strain gauges...

$595.00

Hondata Keychain

Hondata keychain with board chip (Color may vary - Currently Green)

Hondata keychain with board chip (Color may vary - Currently Green)

$5.00

Hondata ECU Socket Tester

ECU Socket Tester   When preparing an ECU for S300/s200 (test s200 socketing using the supplied ...

ECU Socket Tester   When preparing an ECU for S300/s200 (test s200 socketing using the supplied pins) installation it is very easy to make mistakes. Lifted tracks and dry joints can be very difficult to spot. This tester takes out all the guesswork. Simply plug it in and all LEDs will light up when the pins have a good connection. If a LED is not on, then you have a soldering or wiring problem on the respective pin. A bad connection on pin #5 Note that the tester may not show an intermitte...

$50.00

Hondata CPR Coil Pack Retrofit

IN STOCK!   Hondata Coil Pack Retrofit (CPR)   Xenocron Tuning does not sell Hondata products out...

IN STOCK!   Hondata Coil Pack Retrofit (CPR)   Xenocron Tuning does not sell Hondata products outside the US If you are an international customer, Please follow this LINK to find your nearest dealer       Overview The Hondata Coil Pack Retrofit (CPR) allows the use of 'coil on plug' individual ignition coils on engines with distributor based ignition systems (D, B, F and H series Honda engines). It does this by replacing the stock coil and ignition with an electronic circuit which can dri...

$390.00

Hondata License Plate Frame

License plate frame with Hondata logo.

License plate frame with Hondata logo.

$5.00

Hondata Keychain

Hondata keychain (color may vary)

Hondata keychain (color may vary)

$5.00

Hondata FlashPro Pins

These pins are for Civic FlashPro owners who wish to add additional ECU inputs and outputs. Fl...

These pins are for Civic FlashPro owners who wish to add additional ECU inputs and outputs. FlashPro Manager currently supports wideband input on B29 and boost control solenoid output on connector B2. The package includes two large (top and bottom rows) and two small pins (center rows).

$5.00

Hondata Strain Gauge Shift Knob Adapter

Adapts the Hondata Strain Gauge (M10-1.5 female threads) to work with a shift lever using 7/16-20...

Adapts the Hondata Strain Gauge (M10-1.5 female threads) to work with a shift lever using 7/16-20 male threads (Long Shifter)

$25.00

Hondata Traction Control

Traction Control   Traction Control for your s300, KPro or FlashPro. Hondata Traction Control wor...

Traction Control   Traction Control for your s300, KPro or FlashPro. Hondata Traction Control works by monitoring the ABS wheel speed sensors and reducing engine output when excessive wheel-spin is detected. A dash mountable switch allows the selection of different target slip rates, and software allows the system to be tuned for your specific vehicle setup. More details will be available shortly. Price $795 Compatibility ECU / EMS Coverage S300 (I or II) All ECUs / Models KPro (I,...

$590.00

Hondata Reflash

The K-Series reflash is an updated ECU program for many K-Series ECUs. Applications RSX 2002-200...

The K-Series reflash is an updated ECU program for many K-Series ECUs. Applications RSX 2002-2004 RSX- Type SK20A2 RSX 2002-2004 RSX- Type SK20A2 with ITR Cams 2002-2004 Base RSXK20A3 RSX manual 2002-2004 Base RSXK20A3 RSX auto 2005-2006 RSX Type SK20Z1 RSX Type S Civic SI 2002-2004 Civic SiK20A3 Civic Si 2006-2011 Civic Si K20Z3 Civic Si Civic Si 2012-2015 TSX 2004 TSX (manual & auto) K24A2 TSX 2005 TSX (manual only) K24A2 TSX 2005(automatic will never be available) 2006 ...

$295.00

Hondata Lotus Dash Converter

For use with the K-Pro, the Hondata Lotus Dash Converter converts the serial signal from the Hond...

For use with the K-Pro, the Hondata Lotus Dash Converter converts the serial signal from the Honda ECU to the CAN signal used by the Lotus cluster. Channels provided to the 2005-2007 dash are tachometer, speed, odometer, coolant temperature, fuel level, shift light, check engine light and oil pressure light. Additional channels for the 2008+ dash are coolant warning and sequential shift lights. The 2008+ dash has a small LCD display which can cycle through fuel level, fuel (gallons), air/fuel...

$300.00

Hondata License Plate Frame

This item is for a pair of Hondata USDM-size license plate frames. Limited quantities available, ...

This item is for a pair of Hondata USDM-size license plate frames. Limited quantities available, get them while they last!

$10.00

Hondata K-pro D17 AEM Cam Gear

THIS IS ONLY THE CAM GEAR NEEDED FOR THE D17 KPRO. You will still need a Kpro unit and compatibl...

THIS IS ONLY THE CAM GEAR NEEDED FOR THE D17 KPRO. You will still need a Kpro unit and compatible ecu. The K-Pro for the D17 consists of a hardware modification to a donor K-Series ECU, this specially modified cam timing wheel, plus Windows software which allows you to re-program the ECU and datalog sensors. Applications 2001-2005 D17 Civic DX, LX, HX & EX Manual transmission only (North American vehicles only)

$180.00