USD
  • USD
  • EUR
  • GBP
0

Forced Induction

Anything related to turbochargers and superchargers

Precision Turbo V-Band Clamp - for GT42/GT45 Tu...

Making sure you have the proper clamp mated to your turbo shouldn't be an afterthought. To help f...

Making sure you have the proper clamp mated to your turbo shouldn't be an afterthought. To help facilitate installation and removal, make sure you use genuine Precision Turbo & Engine V-Band or T-Bolt clamps. This PTE V-Band Clamp features the following:   Provides a uniform, positive seal   Manufactured from durable, corrosion resistant stainless steel   Recommended V-Band clamp for GT42/GT45 style turbine housings with a 4 5/8" V-Band discharge Don't waste your energy struggling with a ...

$33.99

Precision Turbo V-Band Clamp - 3 5/8"

Making sure you have the proper clamp mated to your turbo shouldn't be an afterthought. To help f...

Making sure you have the proper clamp mated to your turbo shouldn't be an afterthought. To help facilitate installation and removal, make sure you use genuine Precision Turbo & Engine V-Band or T-Bolt clamps.   This PTE V-Band Clamp features the following: • Provides a uniform, positive seal • Manufactured from durable, corrosion resistant stainless steel • Recommended V-Band clamp for the turbine discharge on a PTE V-Band inlet/outlet turbine housing • Recommended V-Band clamp for PTE T4...

$20.49

TurboSmart Race Port 50mm Blow Off Valve

Race Port 50mm BOV Part Numbers: BLUE: TS-0204-1101 BLACK: TS-0204-1102 DESCRIPTION: The largest...

Race Port 50mm BOV Part Numbers: BLUE: TS-0204-1101 BLACK: TS-0204-1102 DESCRIPTION: The largest and the highest-flowing BOV in the Turbosmart range has just been redesigned and now features our unique collar design. 46% lighter and 25% smaller than the product it replaces, the new Race Port provides greater performance through faster turbo spool-up from idle and reduced turbo lag between gears. APPLICATION: Large capacity turbocharger systems and high horsepower engines. Ideal for circuit ...

(3 variants)

Xenocron Manual Boost Controller

This is our popular manual boost controller. It can be used with internal and external wastegates...

This is our popular manual boost controller. It can be used with internal and external wastegates to increase boost up to approximately twice the spring pressure or internal gate setting. In some instances you may be able to boost higher. This is an extremely stable boost controller and easy to use. Once you dial in your intended boost pressure, just tighten the lock nut and forget about it! This boost controller will help decrease spool times as well resulting in a better powerband even if u...

$35.00

Xenocron 54" Turbo Oil Feed Line

This item is a 54" long (3/16" ID) turbo oil feed line with 1/8" NPT male fittings on both ends o...

This item is a 54" long (3/16" ID) turbo oil feed line with 1/8" NPT male fittings on both ends of the line. Additional fittings may be required to attach this line to your turbo.

$49.00

Precision Turbo 46mm Wastegate

These units feature a 46mm valve, and can be used in a wide variety of applications. They can be ...

These units feature a 46mm valve, and can be used in a wide variety of applications. They can be used in any kit or setup that currently utilizes a v-band style 44mm gate, but will work best with the supplied inlet flange (the inside diameter of our flange is slightly larger than our competitors). The wastegates will be shipped with all the necessary hardware (flanges, clamps, springs, etc), and can accommodate a wide range of boost pressures (anywhere from 1.5 PSI up to 25.5 PSI). All units ...

$349.99

Precision Forced Induction Sport 62mm Turbocharger

PRECISION TURBO AND ENGINE is pleased to announce the release of a class-legal IFO Forced Inducti...

PRECISION TURBO AND ENGINE is pleased to announce the release of a class-legal IFO Forced Induction Sport 62mm Turbocharger. The new IFO Forced Induction Sport class legal Turbocharger is purpose-built to maximize horsepower and durability, as well as to fully conform with the current IFO rule set. Featuring an all new 62.9mm inducer GEN2 CEA® (Competition Engineered Aerodynamics) compressor wheel, and new 70mm CEA® turbine wheel, this turbo offers unparalleled performance, great efficiency a...

$2,549.99

Precision Billet 7285 Turbocharger

PTE GEN2 PT7285 with T4 1.12/1.28 A/R - SFWD Class Legal Featuring an exclusive 72mm inducer GEN2...

PTE GEN2 PT7285 with T4 1.12/1.28 A/R - SFWD Class Legal Featuring an exclusive 72mm inducer GEN2 CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging and an 85mm CEA® turbine wheel, Precision’s GEN2 PT7285 CEA® turbocharger is rated to support up to 1,200 horsepower. PTE’s technologically advanced CEA® wheels are known for their unparalleled performance, greater efficiency at higher pressure ratios, less turbo lag, ability to handle higher boost, ...

$3,599.99

Precision Billet 6766 Turbocharger

***When ordering, please list the Compressor Cover, Turbine Inlet, Turbine Discharge, and A/R you...

***When ordering, please list the Compressor Cover, Turbine Inlet, Turbine Discharge, and A/R you would like in the comments section as you check out.*** HP Rating: 935 We know you want to be the best both on the track and off. Whether you're a diehard racer or just looking to boost your daily driver's performance, Precision Turbo and Engine has what you need. For exceptional power and unbeatable technology at an affordable price, PTE can help you find the perfect turbocharger for your unique...

(3 variants)

TurboSmart UltraGate 38mm External Wastegate

DESCRIPTION: Smaller, lighter and better in every key performance area than its predecessor, the ...

DESCRIPTION: Smaller, lighter and better in every key performance area than its predecessor, the new Ultra-Gate38 provides high-end features and build quality at an entry-level price. APPLICATION: Suitable for all turbocharged vehicles with an external wastegate turbo system. Street and racing applications. SUPPLIED WITH: 2 gaskets, 2 NPT fittings, valve seat, mounting bolts and a 7psi spring Available in blue (pictured), and Sleeper Series (black).

(2 variants)

Turbine Blanket

These thick fiberglass turbine blankets make a significant difference in under hood temperatures ...

These thick fiberglass turbine blankets make a significant difference in under hood temperatures as well as helping keep heat in the turbine housing. Heat is energy for the turbine so they will also make the turbo spool and respond quicker. Comes with enough wire to secure the blanket. Comes in T3 and T4 turbine housings sizes.

(2 variants)

Tial MVS 38mm External WG

Tial Sport Wastegate 38mm 347 Stainless Steel Alloy is used for valve and valve housing. High te...

Tial Sport Wastegate 38mm 347 Stainless Steel Alloy is used for valve and valve housing. High temperature silicone Nomex reinforced actuator diaphragm. 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resists "relaxing" at temperature to 900F (483C). Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing the same material used in the higher level gates for reliability and longevity. NC Machined 304L 12mm thick weld flanges. Low Cost. 1...

(3 variants)

Tial MVR 44mm External WG

Tial 44mm MVR External Wastegate   Features: High temp NiCrFe based alloy is used for valve and 3...

Tial 44mm MVR External Wastegate   Features: High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs. - High temperature silicone Nomex reinforced actuator diaphragm. - 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C). - Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing. - All Stainless Steel hardware. - Mati...

(3 variants)

Precision Turbo T4 Turbo Discharge Flange - 3 5...

• V-Band style Outlet flange provides a uniform, positive seal • Manufactured from stainless stee...

• V-Band style Outlet flange provides a uniform, positive seal • Manufactured from stainless steel • Fits most T4 based turbochargers with a 3 5/8" turbine discharge • Allows for use with either a 3.0" or 3.5" downpipe Why bother with cheaper quality flanges that may crack or not seal correctly? Trust Precision to correctly supply the best flange for your project. Precision part # 074-3036, for use with most T4 v-band outlet turbine housings.

$73.99

Precision Turbo T4 Turbine Discharge Flange - 3...

• V-Band Outlet flange provides a uniform, positive seal • Manufactured from mild steel • Fits mo...

• V-Band Outlet flange provides a uniform, positive seal • Manufactured from mild steel • Fits most T4 based turbochargers with a 3 5/8" turbine discharge • For use on a 3.0" downpipe Why bother with cheaper quality flanges that may crack or not seal correctly? Trust Precision to correctly supply the best flange for your project. Precision Part # 074-3014, for use with most T4 v-band turbine housings.

$31.99

Precision Turbo T4 Inlet Flange (Mild Steel)

• Commonly used when fabricating exhaust manifolds for a T4 turbocharger application • Mild steel...

• Commonly used when fabricating exhaust manifolds for a T4 turbocharger application • Mild steel construction Why bother with cheaper quality flanges that may crack or not seal correctly? Trust Precision to correctly supply the best flange for your project. Precision Part # 074-1011, for use with turbine housings with a T4 inlet flange. This is an undivided flange.

$23.99