USD
  • USD
  • EUR
  • GBP
0

Forced Induction

Anything related to turbochargers and superchargers

Xenocron EMAP Backpressure Kit

Xenocron Exhaust Manifold Back Pressure Kit This is a combination of products that will allow you...

Xenocron Exhaust Manifold Back Pressure Kit This is a combination of products that will allow you to add or log an Exhaust Manifold Pressure Readings through your ECU or datalogger This kit includes: (1) Backpressure Canister (Pressure Pulsation Damper) (1) Steel 1/8" NPT Weld Fitting (2) Compression Fittings (1 90 deg, 1 straight) 3 Feet of Flexible Copper Tubing Optional on this kit is an AEM 3.5 bar or 5.0 bar map sensor, or if you would like to use your own map sensor, you can choose th...

(3 variants)

Hondata 4 Port Boost Controller

How much does the Hondata 4 Port Boost Controller cost? $100 Overview The Hondata 4 port boost co...

How much does the Hondata 4 Port Boost Controller cost? $100 Overview The Hondata 4 port boost controller precisely directs pressure to the top and bottom of your waste-gate diaphragm. It allows much lower waste-gate spring pressure for better low gear boost control and perfect high gear, high boost control.  A 10 lb waste-gate spring will enable 50+ psi of boost Better spool-up and mid range power Better duty cycle control For use with: S300 K-Pro FlashPro 2006-11 Civic Si, FlashPro S2000...

$99.00

Hondata 4 Bar MAP Sensor

The Hondata 4 bar map sensor is a plug compatible replacement for the Honda factory MAP sensor. I...

The Hondata 4 bar map sensor is a plug compatible replacement for the Honda factory MAP sensor. It is a direct replacement for the B, D, H and F series Honda engines. This plug in sensor takes less than 60 seconds to install and eliminates the risk of sensor damage that often occurs when attempting to wire in other types of MAP sensors. Hondata 4 bar Map sensors B, D, H, F-series (00-05 S2000) K-series 06+ S2000 & R18 Civic Overview The Hondata 4 bar map sensor is a plug c...

(3 variants)

Precision Turbo Oil Drain Gasket for Small Fram...

We know gaskets aren't very exciting, but if you use high-quality Precision parts to properly sea...

We know gaskets aren't very exciting, but if you use high-quality Precision parts to properly seal your turbo system you can help prevent unnecessary surprises at the track. PTE's gaskets feature the following: • Designed to provide a positive, leak-free seal in high temperature applications • For use on all Precision Turbo and Engine small frame turbochargers (both journal and ball bearing)

$2.99

Precision Turbo V-Band Clamp - 3.00"

Making sure you have the proper clamp mated to your turbo shouldn't be an afterthought. To help f...

Making sure you have the proper clamp mated to your turbo shouldn't be an afterthought. To help facilitate installation and removal, make sure you use genuine Precision Turbo & Engine V-Band or T-Bolt clamps.   This PTE V-Band Clamp features the following: • Provides a uniform, positive seal • Manufactured from durable, corrosion resistant stainless steel • Recommended V-Band clamp for the turbine inlet on a PTE V-Band inlet/outlet turbine housing Don't waste your energy struggling with a...

$24.99

Precision Turbo 39mm Wastegate

Precision Turbo and Engine now makes a high quality external wastegate in a 39mm size! The PW39 i...

Precision Turbo and Engine now makes a high quality external wastegate in a 39mm size! The PW39 is made from high grade, high temperature stainless steel and billet aluminum components. It features Precision's own purpose designed Kevlar reinforced wastegate diaphragm and a 347 stainless investment cast valve body. The investment cast valve body has a smooth internal surface, giving you better flow and more accurate boost control. The PW39 was designed to be a direct replacement for other exi...

$239.99

Precision "Billet 62" Turbo

Precision Turbo's new Billet Wheel 62mm Compressor utilizing PROVEN CEA Technology (competition e...

Precision Turbo's new Billet Wheel 62mm Compressor utilizing PROVEN CEA Technology (competition engineered aerodynamics). These turbos will outflow the competition hands down. Wheel Options Available 6262 (62mm billet compressor, 62mm turbine) 6266 (62mm billet compressor, 66mm turbine) Compressor Cover Options Available "E" Cover "S" Cover "S" Cover w/ Ported Shroud (SP) Turbine Housing Options Available T3 4 Bolt (.63 or .82 A/R) T3 5 Bolt (.63 A/R) T3 V-Band (.63 or .82 A/R) T4 V-Band...

(45 variants)

Precision Turbo GT42 Compressor Discharge O-ring

This is a replacement O-ring for the GT42's v-band compressor cover discharge. Precision part # 9...

This is a replacement O-ring for the GT42's v-band compressor cover discharge. Precision part # 9396K173

$3.49

Precision Turbo 3.0" Turbine V-Band Outlet Flange

• V-Band Outlet flange provides a uniform, positive seal • Manufactured from stainless steel • Fi...

• V-Band Outlet flange provides a uniform, positive seal • Manufactured from stainless steel • Fits PTE turbine housings with a 3.0” V-Band discharge Why bother with cheaper quality flanges that may crack or not seal correctly? Trust Precision to correctly supply the best flange for your project. Precision Part # 074-3012, fits T3 turbine housings with V-band outlet

$43.99

Xenocron 90 Degree Tube Fitting for EMAP Kit

This is the 90 Degree Tube fitting we use in our EMAP Kits.  Will fit a 3/16' OD Tube, is made of...

This is the 90 Degree Tube fitting we use in our EMAP Kits.  Will fit a 3/16' OD Tube, is made of brass and the other end is 1/8" NPT male threads.

$8.60

Xenocron 42" Turbo Oil Feed Line

This item is a 42" long (3/16" ID) turbo oil feed line with 1/8" NPT male fittings on both ends o...

This item is a 42" long (3/16" ID) turbo oil feed line with 1/8" NPT male fittings on both ends of the line. Additional fittings may be required to attach this line to your turbo.

$45.00

Precision Ball Bearing 6466 GEN2 Turbocharger

HP Rating: 900 One of our most highly-anticipated turbochargers, the 6466 is capable of producing...

HP Rating: 900 One of our most highly-anticipated turbochargers, the 6466 is capable of producing unparalleled power in a relatively compact package. Featuring the latest and greatest in compressor and turbine wheel technology from Precision, the PT6466 GEN2 CEA® offers a unique combination of Competition Engineered Aerodynamics (CEA®) with both hot and cold sides! Offering substantially more horsepower over similarly sized turbos, the PT6466 GEN2 CEA® is the perfect choice for those wanting ...

$2,049.99

Precision Ball Bearing 6870 GEN2 Turbocharger

HP Rating: 1,100 Featuring the latest and greatest in compressor and turbine wheel technology fro...

HP Rating: 1,100 Featuring the latest and greatest in compressor and turbine wheel technology from Precision, the PT6870 GEN2 CEA® offers a unique combination of Competition Engineered Aerodynamics (CEA®) with both hot and cold sides! Offering substantially more horsepower over similarly sized turbos, the PT6870 GEN2 CEA® is the perfect choice for those wanting to make more power without changing their current system. Ball Bearing ONLY PTE's PT6870 Turbocharger features the following: • Exc...

$2,399.99

Precision Turbo 40mm Wastegate

PRECISION TURBO AND ENGINE (PTE) recently announced the release of the highly-anticipated, and al...

PRECISION TURBO AND ENGINE (PTE) recently announced the release of the highly-anticipated, and all new PW40 40mm Wastegate that is now available for purchase to distributors and consumers. PTE's new 40mm, V-Band Inlet/Outlet wastegate is constructed from high grade, high temperature stainless steel and billet aluminum components for the best in strength, style, and functionality at an affordable price. Featuring a 347 stainless investment cast valve body with a smooth internal surface, this ...

(2 variants)

Precision Turbo Steel -4AN Oil Inlet Fitting

Steel -4AN to 1/8" oil inlet fitting (for air cooled BB and journal bearing turbos only). Part # ...

Steel -4AN to 1/8" oil inlet fitting (for air cooled BB and journal bearing turbos only). Part # 047-3039

$4.49

Precision Turbo Liquid-to-Air Intercooler

Precision Turbo and Engine has led the way for years with cutting edge technology in heat exchang...

Precision Turbo and Engine has led the way for years with cutting edge technology in heat exchanger products. Our liquid-to-air intercoolers have been behind the scenes in many of the sport's best known supercharged and turbocharged vehicles. Features: 13 1/8" Length x 12 1/2" Width3" In/Out1" NPT for water lines HP Rating - 1000hp

$749.99