USD
  • USD
  • EUR
  • GBP
0

Forced Induction

Anything related to turbochargers and superchargers

Xenocron EMAP Backpressure Kit

Xenocron Exhaust Manifold Back Pressure Kit This is a combination of products that will allow you...

Xenocron Exhaust Manifold Back Pressure Kit This is a combination of products that will allow you to add or log an Exhaust Manifold Pressure Readings through your ECU or datalogger This kit includes: (1) Backpressure Canister (Pressure Pulsation Damper) (1) Steel 1/8" NPT Weld Fitting (2) Compression Fittings (1 90 deg, 1 straight) 3 Feet of Flexible Copper Tubing Optional on this kit is an AEM 3.5 bar or 5.0 bar map sensor, or if you would like to use your own map sensor, you can choose th...

(3 variants)

Hondata 4 Bar MAP Sensor

The Hondata 4 bar map sensor is a plug compatible replacement for the Honda factory MAP sensor. I...

The Hondata 4 bar map sensor is a plug compatible replacement for the Honda factory MAP sensor. It is a direct replacement for the B, D, H and F series Honda engines. This plug in sensor takes less than 60 seconds to install and eliminates the risk of sensor damage that often occurs when attempting to wire in other types of MAP sensors. Hondata 4 bar Map sensors B, D, H, F-series (00-05 S2000) K-series 06+ S2000 & R18 Civic Overview The Hondata 4 bar map sensor is a plug c...

(3 variants)

Hondata 4 Port Boost Controller

How much does the Hondata 4 Port Boost Controller cost? $100 Overview The Hondata 4 port boost co...

How much does the Hondata 4 Port Boost Controller cost? $100 Overview The Hondata 4 port boost controller precisely directs pressure to the top and bottom of your waste-gate diaphragm. It allows much lower waste-gate spring pressure for better low gear boost control and perfect high gear, high boost control.  A 10 lb waste-gate spring will enable 50+ psi of boost Better spool-up and mid range power Better duty cycle control For use with: S300 K-Pro FlashPro 2006-11 Civic Si, FlashPro S2000...

$100.00

Precision Turbo E/S Cover O-Ring

The is a replacement o-ring that goes between the compressor cover and back plate, used to seal t...

The is a replacement o-ring that goes between the compressor cover and back plate, used to seal the two halves together better. This is only used on E and S compressor covers. Precision Part # 070-S70525

$3.49

Precision Turbo Oil Drain Gasket for Small Fram...

We know gaskets aren't very exciting, but if you use high-quality Precision parts to properly sea...

We know gaskets aren't very exciting, but if you use high-quality Precision parts to properly seal your turbo system you can help prevent unnecessary surprises at the track. PTE's gaskets feature the following: • Designed to provide a positive, leak-free seal in high temperature applications • For use on all Precision Turbo and Engine small frame turbochargers (both journal and ball bearing)

$2.99

Hondata 7 Bar MAP Sensor

The Hondata 7 bar map sensor is a plug compatible replacement for the Honda factory MAP sensor. I...

The Hondata 7 bar map sensor is a plug compatible replacement for the Honda factory MAP sensor. It is a direct replacement for the K, B, D, H and F series Honda engines. This plug in sensor takes less than 60 seconds to install and eliminates the risk of sensor damage that often occurs when attempting to wire in other types of MAP sensors. Hondata 7 bar Map sensors B, D, H, F-series (00-05 S2000) K-series B, D, H, F-Series - $125 K-Series - $125 How do I configure my software for the 4 ...

(3 variants)

Precision Turbo V-Band Clamp - 3.00"

Making sure you have the proper clamp mated to your turbo shouldn't be an afterthought. To help f...

Making sure you have the proper clamp mated to your turbo shouldn't be an afterthought. To help facilitate installation and removal, make sure you use genuine Precision Turbo & Engine V-Band or T-Bolt clamps.   This PTE V-Band Clamp features the following: • Provides a uniform, positive seal • Manufactured from durable, corrosion resistant stainless steel • Recommended V-Band clamp for the turbine inlet on a PTE V-Band inlet/outlet turbine housing Don't waste your energy struggling with a...

$24.99

Tial Q BOV BLACK

TiAL Sport Blow-Off Valve, Q-Series, 50mm, 11 psi Spring, Billet Aluminum, Black TiAL's Q series ...

TiAL Sport Blow-Off Valve, Q-Series, 50mm, 11 psi Spring, Billet Aluminum, Black TiAL's Q series is the most current revision of the original TiAL BOV. The Q bolts up to any standard TiAL flange, no re-welding. For use on turbo-charged and super-charged applications (Paxton, Vortech, etc.). The body and all internal components are CNC - machined from 6061 aluminum alloy. It features a large 1.98 in. (50.5mm) valve. The v-band design aluminum mounting clamp gives a very clean and unique appear...

$265.00

Xenocron Manual Boost Controller

This is our popular manual boost controller. It can be used with internal and external wastegates...

This is our popular manual boost controller. It can be used with internal and external wastegates to increase boost up to approximately twice the spring pressure or internal gate setting. In some instances you may be able to boost higher. This is an extremely stable boost controller and easy to use. Once you dial in your intended boost pressure, just tighten the lock nut and forget about it! This boost controller will help decrease spool times as well resulting in a better powerband even if u...

$35.00

Precision Turbo 39mm Wastegate

Precision Turbo and Engine now makes a high quality external wastegate in a 39mm size! The PW39 i...

Precision Turbo and Engine now makes a high quality external wastegate in a 39mm size! The PW39 is made from high grade, high temperature stainless steel and billet aluminum components. It features Precision's own purpose designed Kevlar reinforced wastegate diaphragm and a 347 stainless investment cast valve body. The investment cast valve body has a smooth internal surface, giving you better flow and more accurate boost control. The PW39 was designed to be a direct replacement for other exi...

$239.99

Xenocron Turbo filter

Please read this Installation Instruction link before purchasing your turbo filter! Xenocron's...

Please read this Installation Instruction link before purchasing your turbo filter! Xenocron's turbo filter is meant to prevent large particles from being drawn into the turbo along with saving space and looking 'fashionable.' A small (roughly 2" in length) coupler can be added using the drop-down menu. Clamps are not included. ***Ideal for track use on lower boost setups, never tested but assumed that at higher boost levels on large turbos the screen may become a restriction*** U...

(6 variants)

Xenocron EMAP Backpressure Damper

This is a Exhaust Manifold Backpressure damper that aids in the ability to measure backpressure o...

This is a Exhaust Manifold Backpressure damper that aids in the ability to measure backpressure on your turbocharged vehicle. This item is for the damper only but to completely install this you might require fittings, line, and a sensor. ***IF YOU HAVE ANY QUESTIONS PLEASE CALL OR EMAIL BEFORE PLACING YOUR ORDER***

$69.95 $79.95

Precision Turbo and Engine T4 Divided 4 Bolt In...

We know gaskets aren't very exciting, but if you use high-quality Precision parts to properly sea...

We know gaskets aren't very exciting, but if you use high-quality Precision parts to properly seal your turbo system you can help prevent unnecessary surprises at the track. PTE's gaskets feature the following: • Designed to provide a positive, leak-free seal in high temperature applications • Manufactured from stainless steel Precision Part # 075-5017

$5.99

Precision Turbo and Engine T4 4 Bolt Inlet Gasket

We know gaskets aren't very exciting, but if you use high-quality Precision parts to properly sea...

We know gaskets aren't very exciting, but if you use high-quality Precision parts to properly seal your turbo system you can help prevent unnecessary surprises at the track. PTE's gaskets feature the following: • Designed to provide a positive, leak-free seal in high temperature applications • Manufactured from stainless steel Precision Part # 075-5006

$7.99

Precision "Billet 62" Turbo

Precision Turbo's new Billet Wheel 62mm Compressor utilizing PROVEN CEA Technology (competition e...

Precision Turbo's new Billet Wheel 62mm Compressor utilizing PROVEN CEA Technology (competition engineered aerodynamics). These turbos will outflow the competition hands down. Wheel Options Available 6262 (62mm billet compressor, 62mm turbine) 6266 (62mm billet compressor, 66mm turbine) Compressor Cover Options Available "E" Cover "S" Cover "S" Cover w/ Ported Shroud (SP) Turbine Housing Options Available T3 4 Bolt (.63 or .82 A/R) T3 5 Bolt (.63 A/R) T3 V-Band (.63 or .82 A/R) T4 V-Band...

(45 variants)

Precision Turbo GT42 Compressor Discharge O-ring

This is a replacement O-ring for the GT42's v-band compressor cover discharge. Precision part # 9...

This is a replacement O-ring for the GT42's v-band compressor cover discharge. Precision part # 9396K173

$3.49