USD
  • USD
  • EUR
  • GBP
0

Featured

Xenocron SST27SF512 Version 2 Eprom Chip

This is our new release of a replacement to the 28 pin SST Chips that many of us DIY Honda Tuners...

This is our new release of a replacement to the 28 pin SST Chips that many of us DIY Honda Tuners have been using for the last 15 years or so.  As supply of legitimate SST manufactured EPROMS has dwindle, we had to look for a new solution and this is what we have come up with to help! We are using legitimate SST PLCC chips, and converting to a board that fits a standard 28 pin socket. (PLCC to PDIP) In addition to a normal SST Chip, we have include a 2 pin header that allows you to access eit...

$15.00 $19.95

Xenocron DIY Wheel Speed Sensor Kit (RWSS)

Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily ...

Xenocron Tuning's new WHEEL SPEED SENSOR Kit for Do-It-Yourselfers This kit allows you to easily add a Hall Effect sensor to your vehicle for monitoring wheel speed, shaft speed...etc, anything you can think of that can use it. Wire it in to an extra Wheel Speed Input on your Standalone Engine Management System or replace your Transmission mounts VSS (vehicle speed sensor) to use Rear Wheel speed (Ground Speed) versus Front Wheel Speed. Kit Includes: Hall Effect Speed Sensor 10' Shielded 3 c...

(8 variants)

Xenocron EMAP Backpressure Kit

Xenocron Exhaust Manifold Back Pressure Kit This is a combination of products that will allow you...

Xenocron Exhaust Manifold Back Pressure Kit This is a combination of products that will allow you to add or log an Exhaust Manifold Pressure Readings through your ECU or datalogger This kit includes: (1) Backpressure Canister (Pressure Pulsation Damper) (1) Steel 1/8" NPT Weld Fitting (2) Compression Fittings (1 90 deg, 1 straight) 3 Feet of Flexible Copper Tubing Optional on this kit is an AEM 3.5 bar or 5.0 bar map sensor, or if you would like to use your own map sensor, you can choose th...

(3 variants)

Xenocron B-Series Complete Cam Degree Kit

Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in...

Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in your B-Series camshafts, but to check valve-to-valve and valve-to-piston clearances as well. No high-performance motor should be assembled without performing these procedures, and with this kit you can easily do them yourself. This COMPLETE KIT includes the following: (1) Dial indicator extension (1) Aluminum mount for outer dial indicators (B-Beam) (1) Aluminum mount for center dial indicator (...

$279.00

Xenocron K-Series Complete Cam Degree Kit

Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in...

Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in your K-Series camshafts, but to check valve-to-valve and valve-to-piston clearances as well. No high-performance motor should be assembled without performing these procedures, and with this kit you can easily do them yourself. This COMPLETE KIT includes the following: (1) Dial indicator extension (1) Aluminum mount for outer dial indicators (K-Beam) (1) Aluminum mount for center dial indicator (...

$279.00

Xenocron Oil Take Off Adapter - Dual Outlet

These fittings are custom machined and are the perfect solution for those looking to utilize the ...

These fittings are custom machined and are the perfect solution for those looking to utilize the oil pressure sender port as an oil source.   The fittings has the proper 1/8\" BSPT male threads to go into the back of the block on most Honda/Acura engines (as well as other brands, be sure to check yours for compatibility before ordering). On the opposite end are the correct female threads for reinstalling your pressure sender. These adapters have two ports on the side with 1/8\"NPT female thre...

$19.95

Xenocron 3 Port PWM Boost Solenoid Kit

Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and other standalo...

Xenocron electronic boost solenoid used for eCtune, Neptune, S300 Boostcontrol and other standalone ECUs. This is a HIGH quality solenoid that offers stable boost control with the PWM Functionality of eCtune, Neptune, Hondata S300, AEM and others. The kit includes (1) Solenoid, (2) Brass Hose Barbs and a screen fitting for the front port of the solenoid and wiring. Please consult your tuner for how this should be installed to your specific application as there are different ways to install th...

(2 variants)

Xenocron H-Series Complete Cam Degree Kit

Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in...

Our Xenocron Cam Degree kit invented and designed by Mike Belben enable you to not only degree-in your H-Series camshafts, but to check valve-to-valve and valve-to-piston clearances as well. No high-performance motor should be assembled without performing these procedures, and with this kit you can easily do them yourself. This COMPLETE KIT includes the following: (1) Dial indicator extension (1) Aluminum mount for outer dial indicators (H-Beam) (1) Aluminum mount for center dial indicator (...

$279.00

Haltech Nexus R5 VCU ECU PDM HT-195000

VCU OVERVIEW NEXUS R5 is the new Haltech flagship product combining the functionality of a pow...

VCU OVERVIEW NEXUS R5 is the new Haltech flagship product combining the functionality of a power distribution module, a data logger, a dual channel wideband controller and a state-of-the art engine management system in one powerful device we call a VCU (Vehicle Control Unit). 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) 12 x 8A (continuous) high side outputs (low speed PWM, 200 Hz) outputs (power to sensor...

$3,895.00

KTUNER End User Flash Kit V1.2

The new KTUNER End User Flash Kit allows datalogging and reflashing right over your factory OBD2 ...

The new KTUNER End User Flash Kit allows datalogging and reflashing right over your factory OBD2 port! This compact unit is not only economical, but it also works with many popular OBD2 applications such as the 06-11 Civic Si, 06-09 S2000, 09-10 TSX, and many others (see the complete updated list online) The KTuner flash tuning package comes with a single KTuner hardware unit paired with a single user license for the KTuner software. This unit is locked to one ECU and allows you to alter the ...

$449.00

ASP Brake Booster Delete Kit

This kit eliminates the factory brake booster on most 92+ Honda/Acura vehicles. Kit includes: - 1...

This kit eliminates the factory brake booster on most 92+ Honda/Acura vehicles. Kit includes: - 1/2" thick ASP Performance aluminum adapter plate - Wilwood manual brake master cylinder - Wilwood clevis - Mounting hardware for the plate and master cylinder This is a race-only part and is intended for off-road use only. This will require some customization to install, including modification to your brake lines and possibly your pedal assembly depending on your setup.

$143.94 $165.00

Haltech Elite Plug and Play Kit for B-Series

Haltech Elite Plug and Play Kits Includes: Elite 1000/1500 ECU Plug and Play Harness for OBD1 Ho...

Haltech Elite Plug and Play Kits Includes: Elite 1000/1500 ECU Plug and Play Harness for OBD1 Honda Single Channel CAN Wideband Options: Flex Fuel Ground Speed (via rear wheel) Dash Options (CAN) OBD1 T1 Cam Trigger OBD1 K-Coils FIC or ID Injectors

(2 variants)

Hondata KPRO V4 with Brand New PRC ECU

This Package Includes (1) Brand New OEM Honda PRC ECU with a Brand New Hondata KPRO V4 installed ...

This Package Includes (1) Brand New OEM Honda PRC ECU with a Brand New Hondata KPRO V4 installed into it.  No core required, no waiting to send in your ECU....this package is ready to go!  *** If you plan to use this in a Nitrous Application, please call first as this ECU is limited on Nitrous outputs. ***  

$1,299.00 $1,499.00

Flex Fuel Converter Kit

A little Flex Fuel kit we worked up for those of you needing a tidy solution where your ECU accep...

A little Flex Fuel kit we worked up for those of you needing a tidy solution where your ECU accepts a 0-5 volt signal for flex % content! Kit Includes: Flex Fuel Sensor Flex Fuel Converter Wire Harness Connectors

$249.00

Xenocron Flex Fuel Sensor Bracket

This is our Xenocron Universal Flex Fuel Bracket.  It mounts to the factory GM Continental Sensor...

This is our Xenocron Universal Flex Fuel Bracket.  It mounts to the factory GM Continental Sensor by clipping it in place with no additional tools or hardware needed.  We include mounting hardware, 2 different lengths M6x1.00 bolts, and 4 washers for spacing if needed. These brackets are printed with Multi Jet Fusion 3d printers for strength and flexibility.

$49.95