USD
  • USD
  • EUR
  • GBP
0

Engine

Engine Internals (Pistons, Rods, Bearings) along with Camshafts, Head Packages and other engine related upgrades and replacement parts.

Darton Honda K20/K24 MID Sleeve Kit

Darton MID Sleeve kit for Honda/Acura K20 and K24 (available in 86mm-90mm) The Darton MID™ Sleeve...

Darton MID Sleeve kit for Honda/Acura K20 and K24 (available in 86mm-90mm) The Darton MID™ Sleeve Kit is available for many series of 4, 6, and 8 cylinder import and domestic engines and provides for maximum bore sizes and boost potential. The benefits of our MIDseries kits are: Cast iron performance in an aluminum block Improved block integral strength Improved cooling Kits can be installed by your local machine shop "Wet sleeve" replace-ability Full installation manual available on websit...

(3 variants)

Drag Cartel Exhaust Cam Gear Only

**THIS IS FOR A SINGLE EXHAUST GEAR ONLY** CARTEL CAM GEARS ARE MADE WITH 8620 Billet MATERIAL Ge...

**THIS IS FOR A SINGLE EXHAUST GEAR ONLY** CARTEL CAM GEARS ARE MADE WITH 8620 Billet MATERIAL Gears Are Carburized To Aircraft Spec For Maximum Wear Resistance Polished Centers With Cartel Trademark Logo.

$200.00

Drag Cartel Adjustable Cam Gears (Set of 2)

CARTEL CAM GEARS ARE MADE WITH 8620 Billet MATERIAL Gears Are Carburized To Aircraft Spec For Max...

CARTEL CAM GEARS ARE MADE WITH 8620 Billet MATERIAL Gears Are Carburized To Aircraft Spec For Maximum Wear Resistance Polished Centers With Cartel Trademark Logo.

$400.00

Drag Cartel K-Series Oil Filter Baffle

OEM Replacement Strainer Assy., VTC Applications: Honda K24, Honda K20

OEM Replacement Strainer Assy., VTC Applications: Honda K24, Honda K20

$39.99

Drag Cartel Intake and Exhaust Port Covers

K-Series Intake and Exhaust Port Covers These are great for anyone storing or transporting an eng...

K-Series Intake and Exhaust Port Covers These are great for anyone storing or transporting an engine without the manifolds and are worried about debris! 8620 BILLET MACHINED and ANODIZED BLACK

$160.00

Drag Cartel K-Series Tensioner Cover

The DRAG CARTEL Tensioner Cover Plate is designed with a simple o-ring seal that is set into a ma...

The DRAG CARTEL Tensioner Cover Plate is designed with a simple o-ring seal that is set into a machined groove on the back of the cover. This o-ring seal design makes timing chain tensioner checks and changes much faster and easier because it completely eliminates the need for messy sealer which we all know is a pain to clean off. Worse yet, the OEM stamped steel cover plate often needs to be replaced because it usually bends when it is pried off the chain case. So why is checking the chain t...

$44.99

Drag Cartel VTC BLOCK OFF

Here we have a Drag Cartel black anodized VTC Block Off, for use with K-series engines.

Here we have a Drag Cartel black anodized VTC Block Off, for use with K-series engines.

$55.00

Drag Cartel K-Series VTEC Block Off

Made for Vtec killer setups on k-series engines. Made from lightweight aluminum and hard anodiz...

Made for Vtec killer setups on k-series engines. Made from lightweight aluminum and hard anodized black. Weighs in at only 3 ounces with hardware compared to the stock solenoid that weighs 1 pound and 3 ounces.

$89.00

Drag Cartel K-Series Water Plate

Drag Cartel K-Series Water Pump Block Off Plate Race only no Alternator

Drag Cartel K-Series Water Pump Block Off Plate Race only no Alternator

$109.00

Drag Cartel K Series Timing Chain Guide

Description: DRAG CARTEL lower timing chain guide provides two functions: Replaces the oem lower...

Description: DRAG CARTEL lower timing chain guide provides two functions: Replaces the oem lower chain guide. Prevents timing chain slippage off the crank pulley chain gear when performing a cam swap. If you're a k-series head, you know about the keeping the timing chain held up when performing a cam swap and how much of a pain it is when it does slip! Features: Fits both K20 and K24 engines Prevents timing chain from skipping teeth Secures chain in case of timing tensioner failure Easy bo...

$59.00

Drag Cartel DROP IN CAMS (DIC)

Intake: Intake Low Speed Lobe: Duration 250° / (9.6 mm lift) Intake High Speed Lobe: Duration 29...

Intake: Intake Low Speed Lobe: Duration 250° / (9.6 mm lift) Intake High Speed Lobe: Duration 295° / (12.7mm lift) Exhaust: Exhaust Low Speed Lobe: Duration 243° / (8.4 mm lift) Exhaust High Speed Lobe: Duration 288°/ (12.00 mm lift) IN STOCK READY FOR IMMEDIATE DELIVERY!!

$999.00

Drag Cartel CARTEL 2.2 ENDURANCE

Drag Cartel Stage 2.2 K-Series Camshafts ALL NEW 8620 Billet Material Intake: 13.5 mm Lift / .2...

Drag Cartel Stage 2.2 K-Series Camshafts ALL NEW 8620 Billet Material Intake: 13.5 mm Lift / .238 Duration @ .050 Exhaust :12.2 mm Lift/.233 Duration @ .050 IN STOCK READY FOR IMMEDIATE DELIVERY!!

$999.00

Drag Cartel CARTEL 003.2

Drag Cartel Stage 003 Billet K-Series Camshafts ALL NEW 8620 Billet Material !!! Ultimate Street...

Drag Cartel Stage 003 Billet K-Series Camshafts ALL NEW 8620 Billet Material !!! Ultimate Street Setup K24/K20 12.5:1 Setup Intake: 13.8 mm Lift / 254 Duration @ .050 Exhaust :13.2 mm Lift/ 250 Duration @ .050

$999.00

Drag Cartel Stage 004 Cams

Drag Cartel Stage 004 Billet K-Series Camshafts ALL NEW 8620 Billet Material Intake:14.5 mm Lif...

Drag Cartel Stage 004 Billet K-Series Camshafts ALL NEW 8620 Billet Material Intake:14.5 mm Lift / .280 Duration @ .050 Exhaust :13.2 mm Lift/.272Duration @ .050 IN STOCK !!!

$999.00

Drag Cartel Billet Stage 004.5

Drag Cartel Billet Stage 004.5 K-Series Camshafts Intake: 14.8 mm Lift /.284 Duration @ .050 Ex...

Drag Cartel Billet Stage 004.5 K-Series Camshafts Intake: 14.8 mm Lift /.284 Duration @ .050 Exhaust:13.7 mm Lift/.276 Duration @ .050

$999.00

Drag Cartel Cartel Stage 6 Twin Lobe "Killers"

Drag Cartel Stage 6 K-Series Twin Lobe "Killer" Camshafts After years of high end race and DYNO ...

Drag Cartel Stage 6 K-Series Twin Lobe "Killer" Camshafts After years of high end race and DYNO testing DC has released a line of 8620 steel billet camshafts that deliver the ultimate in high performance. Made from aerospace grade, 8620 steel billet material and CNC ground on state-of-the-art cam grinders, these DC cams deliver the utmost in rigidity at extended rpm range while reducing possible valve float. These are the best cams money can buy and are now available for all stages.The "K Se...

$1,549.00