USD
  • USD
  • EUR
  • GBP
0

ECUs and Electronics

This collection will be dedicated to ECUs and Electronics for tuning.  Standalone brands (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other tuning solutions for Do-It-Yourselfers along with complimentary products that also fit into this category.

ECU Chipping Service

This is a service for sending in your stock OBD1 ECU for chipping. Once placed, we will hold onto...

This is a service for sending in your stock OBD1 ECU for chipping. Once placed, we will hold onto your order until your ECU arrives and match it up so please put a copy of your order inside the box with the ECU when you send it in to us. Includes: All chipping parts, ZIF socket and (1) reburnable eprom Labor for installing components and testing of your completed ECU on the bench.  We test every ECU before it leaves for function (we do not test them before we chip them, we assume all are 100...

$69.95

Denso K-Series Primary O2 Sensor

This is a Denso replacement primary o2 sensor for the 2002-2004 RSX/ 2001-2005 Civic Si. This can...

This is a Denso replacement primary o2 sensor for the 2002-2004 RSX/ 2001-2005 Civic Si. This can also be used in cars that have a Hondata KPRO ecu and now require the use of a front o2 sensor or in a car with a K-series swap that needs a primary o2.

$199.00

Denso Primary o2 Sensor for KTuner

Denso Primary o2 Sensor for KTuner Applications

Denso Primary o2 Sensor for KTuner Applications

$125.00

Xenocron DIY OBD2 Honda - RDX Adapter

This is a DIY product! This item is listed PER INJECTOR, order the quantity based on how many inj...

This is a DIY product! This item is listed PER INJECTOR, order the quantity based on how many injectors you need to adapt! Included is: ONE set of pins, grommets and clip for RDX Injector ONE set of pins, grommets and clip for OBD2 Male Enough wire to complete the kit If you have questions, please email us PRIOR to ordering. There will be no returns or exchanges on these items.  

$9.99

Xenocron DIY OBD1 Honda - RDX Adapter

This is a DIY product! This item is listed PER INJECTOR, order the quantity based on how many inj...

This is a DIY product! This item is listed PER INJECTOR, order the quantity based on how many injectors you need to adapt! Included is: ONE set of pins, grommets and clip for RDX Injector ONE set of pins, grommets and clip for OBD2 Male Enough wire to complete the kit If you have questions, please email us PRIOR to ordering. There will be no returns or exchanges on these items.  

$8.99

DIYer Intro Tuning Package

This is a popular Do-It-Yourselfer TUNING INTRO Package which includes: Moates Ostrich Eprom E...

This is a popular Do-It-Yourselfer TUNING INTRO Package which includes: Moates Ostrich Eprom Emulator Moates Hulog Datalogging Kit Innovate MTX-L Wideband Kit   This package is perfect for the self-tuner who wants to get started tuning their own vehicle. Includes all hardware items needed to start Tuning the popular OBD0/OBD1 Honda/Acura ECU Editors like Crome, eCtune, Uberdata, TurboEdit, BRE, Hondata, Neptune. Just provide a chipped ECU or add a chipped ECU to this package using the ...

$623.00

PLX DM-100 Intelligent Multi-Functional Display...

DM-100 Intelligent Multi-Functional Display (iMFD) Universal 2 1/16" (52mm) OLED Color Display f...

DM-100 Intelligent Multi-Functional Display (iMFD) Universal 2 1/16" (52mm) OLED Color Display for all Sensor Modules Customizable gauge styles, backgrounds and colors Analog, Digital, Graph, 4 Parameter styles Organic LED display Set peak and hold points Intelligent warning Daisy Chain up to 32 Sensor Modules Simple to Install PC Interface Software Included Comes with Remote Control We are a stocking Warehouse Distributor, wholesale accounts welcome!

$124.99 $209.00

E-Tuning Service

E-Tuning by Xenocron "E-Tuning" or EMail Tuning Service provided by Xenocron will be for a select...

E-Tuning by Xenocron "E-Tuning" or EMail Tuning Service provided by Xenocron will be for a select set of engine management systems listed below. This list will grow as we add more systems. Our E-Tuning service will focus on SAFETY and DRIVEABILITY using logs you will send us taken by the engine management system you are using. Once you purchase our service we will be partners in making sure your vehicle, runs, drives and is safe! As we always promote, for the ultimate in PERFORMANCE and RELIA...

$299.00

Rywire OBD0 to OBD1 ECU Conversion Harness

Convert your 1988-1991 civic/crx and 1990-1991 Integra to run any OBD1 1992-1995 ecu. Requirement...

Convert your 1988-1991 civic/crx and 1990-1991 Integra to run any OBD1 1992-1995 ecu. Requirements: All civic/crx models must either be a SI or HF or a MPFI(Multi Point Fuel Injection) converted car. DX and Standard models that are DPFI (Dual Point Fuel Injection) must be converted to MPFI for this conversion to work properly. This conversion is primarily made for a 5 speed chassis. You will need an OBD1 ecu, distributor and a 4 wire O2 sensor. All harnesses come with detailed instructions fo...

$135.00

Rywire OBD2a to OBD1 ECU Conversion Harness

Converts any: 1996-1999 Acura Integra 1996-1998 Honda Civic 1996-2001 Honda Prelude 1996-1997 Hon...

Converts any: 1996-1999 Acura Integra 1996-1998 Honda Civic 1996-2001 Honda Prelude 1996-1997 Honda Accord to run any OBD1 1992-1995 ECU. Requirements: This conversion is primarily made for 5 speed chassis You will need: - OBD1 1992-1995 ECU What you get: - Full Technical Support

$125.00

Rywire OBD2b to OBD1 ECU Conversion Harness

Converts any: 2000-2001 Acura Integra 1999-2000 Honda Civic 1998-2002 Honda Accord to run any OBD...

Converts any: 2000-2001 Acura Integra 1999-2000 Honda Civic 1998-2002 Honda Accord to run any OBD1 1992-1995 ECU. Requirements: This conversion is primarily made for 5 speed chassis. You will need: - OBD1 1992-1995 ECU What you get: - Full Technical Support ***Note: the current batch of harnesses does not have the IAB wire, if you need to use this harness with IABs please contact us before placing your order.***

$125.00

Moates F2A Ford Module Programming Adapter

With this adapter (shown at top), you will be able to use the BURN1 device to read and write your...

With this adapter (shown at top), you will be able to use the BURN1 device to read and write your F2 Ford Memory Module directly! No need to remove the chip from the module, this lets you read it through the edgecard connector. See the 'F2E' for more functionality. Bottom image shows the F2A hooked up with an F2 and BURN1.

$15.00

Moates F2E Integrated Ford EEC Computer Reading...

If you want to use your BURN1/F2A combo to read the binaries off your stock EEC Computer, then th...

If you want to use your BURN1/F2A combo to read the binaries off your stock EEC Computer, then this is the hot item! Allows you to power the EEC Computer on the bench via the USB port through the BURN1/F2A! No external power needed. Might even work in the car, haven't tested that out yet. Lets you read a full 4-bank EEC-V in less than 10 seconds. Item is shown in top picture. Bottom picture shows it in use with an F2A and BURN1 hooked up to a 2-bank EEC-V.

$15.00

Moates F3v2 Ford Memory Adapter

This is the new version of the F3 chip module for pre-2005 EEC. Compatible with Jaybird and BURN2...

This is the new version of the F3 chip module for pre-2005 EEC. Compatible with Jaybird and BURN2/FA with free 5.15.F firmware update. Supports 8-positions of 1/2/4-bank. Automatic PATS masking logic with manual jumpers for selective defeat. Full 256k read/write for scratchpad access.

$75.00

FIC Set of 4 Quick Release EV1 Injector Connect...

FIC Set of 4 Quick Release EV1 Injector Connectors with Pigtails

FIC Set of 4 Quick Release EV1 Injector Connectors with Pigtails

$32.00

FIC Set of 4 USCAR Injector Clips w/ Pigtails

Set of 4 USC/ EV6 injector connectors with Pig tails

Set of 4 USC/ EV6 injector connectors with Pig tails

$32.00