USD
  • USD
  • EUR
  • GBP
0

ECUs and Electronics

This collection will be dedicated to ECUs and Electronics for tuning.  Standalone brands (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other tuning solutions for Do-It-Yourselfers along with complimentary products that also fit into this category.

AEM 100 PSIg Fluid Stainless Sensor Kit

AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. The...

AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. They have a 3-wire mating connector with 12 in. leads for an easy plug-in installation. Kits are available for boost, exhaust gas temperature, nitrous oxide, brake pressure, inlet air temperature, or UEGO replacement gauges.AEM Electronics PSIG sensor kits are available in brass or stainless steel. Use brass sensors where you need a good reference to what pressure is being seen; e.g., reference/infor...

$150.00

AEM 150 PSIg Stainless Steel Sensor Kit

150 PSIg Stainless Steel Sensor Kit. Stainless Steel Sensor Body. 1/8" NPT Male Thread. Includes:...

150 PSIg Stainless Steel Sensor Kit. Stainless Steel Sensor Body. 1/8" NPT Male Thread. Includes: 150 PSIg Stainless Steel Sensor, Connector, Pins & 1/8" NPT to -4 Adapter. Sensor Performance Specifications: Accuracy: +/- 0.5% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity Operating Temp: -40C to 105C / -40F to 221F Burst Pressure: 1500PSI Response Time: < 1mS Wetted Materials: 304L & 316L Stainless Steel Vibration: 100 to 2000Hz, 20g Sinusoidal, 3 Ax...

$160.45

AEM Air Temp Sensor Kit 3/8 NPT

Air Inlet Temperature (AIT) Sensor Kit. 3/8"NPT. Includes: Air Temp Sensor, 3/8"NPT Aluminum Bung...

Air Inlet Temperature (AIT) Sensor Kit. 3/8"NPT. Includes: Air Temp Sensor, 3/8"NPT Aluminum Bung, Connector & Pins. Sensor Performance Specifications: Accuracy: < 1.5°C / 2.7°F Operating Temp: -40C to 135C / -40F to 275F Resistive Range (Ω): See Table Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil Sensor Body Material:...

$56.73

Xenocron 4 Bar MAP sensor (GM Style)

The PERFECT upgrade for those who already have the GM 3 bar and want to run more boost!!! Xenocro...

The PERFECT upgrade for those who already have the GM 3 bar and want to run more boost!!! Xenocron Tuning Solutions is pleased to introduce a new 4 bar MAP sensor with a GM-style case. The case and the clip for this sensor are the same as the very popular GM 3 bar. What this will allow you to do is put one of these new sensors in place of a GM 3 bar in order to run more boost (with proper tuning of course). If you do not already have the GM 3 bar, this sensor still is a very good choice for a...

$89.00

Xenocron D.I.Y RWSS SENSOR ONLY

This is the Sensor ONLY to our very popular Rear Wheel Speed Sensor kits. This is to be used for ...

This is the Sensor ONLY to our very popular Rear Wheel Speed Sensor kits. This is to be used for the replacement of the original sensor.

$59.95

Xenocron 3 Bar MAP Sensor Kit (GM)

Comes with new 3 bar map sensor, weatherpack pigtail connection with pins and directions for the ...

Comes with new 3 bar map sensor, weatherpack pigtail connection with pins and directions for the most common Honda wiring. This sensor allows you to run up to approximately ~29 psi of boost on Speed Density based engine management systems. The calibration of this map sensor is the same as a factory GM 3 Bar Sensor

$65.00

Flex Fuel Sensor

Flex Fuel Sensor's are in stock! The Flex Fuel Sensor detects the ethanol concentration in a gaso...

Flex Fuel Sensor's are in stock! The Flex Fuel Sensor detects the ethanol concentration in a gasoline / ethanol fuel mixture and provides alcohol content pre-injection. The engine controller utilizes sensor output to control the stoichiometric air-to-fuel ratio. In cold start combustion it improves efficiency and pollutant emissions following a refueling event. Picture shows actual product!

$65.00

Haltech 1 Bar GM MAP Sensor

Haltech 1 Bar GM MAP Sensor (inc plug & pins) A Haltech MAP sensor (manifold absolute pressur...

Haltech 1 Bar GM MAP Sensor (inc plug & pins) A Haltech MAP sensor (manifold absolute pressure) provides instantaneous pressure information to the electronic control unit (ECU) from the intake manifold – the amount of boost or vacuum in the intake manifold. This is necessary to calculate air density and determine the engine’s air mass flow rate or in other words engine load. Engine load is used as a reference for all base fuel and ignition maps.

$94.00

Haltech 150 PSI "TI" Fuel/Oil Pressure Sensor

Haltech 150 PSI "TI" Fuel and Oil Pressure Sensor (inc plug & pins) 1/8 NPT TI SENSORS MUST N...

Haltech 150 PSI "TI" Fuel and Oil Pressure Sensor (inc plug & pins) 1/8 NPT TI SENSORS MUST NOT BE MOUNTED DIRECTLY INTO THE FUEL RAIL OR ENGINE BLOCK, THEY MUST BE REMOTE MOUNTED AND CONNECTED VIA A FLEXIBLE HOSE **If required use Pressure Sensor Extension Hose HT-039103**

$189.00

Haltech 2000 PSI "Honeywell" Brake/Nitrous Pres...

2000 PSI "Honeywell" Brake and Nitrous Pressure Sensor (inc plug & pins) 1/8 NPT

2000 PSI "Honeywell" Brake and Nitrous Pressure Sensor (inc plug & pins) 1/8 NPT

$276.00

Haltech 250 PSI "TI" Fuel/Oil Pressure Sensor

Haltech 250 PSI "TI" Fuel and Oil Pressure Sensor (inc plug & pins) 1/8 NPT TI SENSORS MUST ...

Haltech 250 PSI "TI" Fuel and Oil Pressure Sensor (inc plug & pins) 1/8 NPT TI SENSORS MUST NOT BE MOUNTED DIRECTLY INTO THE FUEL RAIL OR ENGINE BLOCK, THEY MUST BE REMOTE MOUNTED AND CONNECTED VIA A FLEXIBLE HOSE If required use Pressure Sensor Extension Hose HT-039103

$189.00

Haltech 3 Bar GM MAP Sensor

Haltech 3 Bar GM MAP Sensor (inc plug & pins) A Haltech MAP sensor (manifold absolute pressur...

Haltech 3 Bar GM MAP Sensor (inc plug & pins) A Haltech MAP sensor (manifold absolute pressure) provides instantaneous pressure information to the electronic control unit (ECU) from the intake manifold – the amount of boost or vacuum in the intake manifold. This is necessary to calculate air density and determine the engine’s air mass flow rate or in other words engine load. Engine load is used as a reference for all base fuel and ignition maps.

$118.00

Haltech 4 Bar Motorsport MAP Sensor

A Haltech MAP sensor (manifold absolute pressure) provides instantaneous pressure information to ...

A Haltech MAP sensor (manifold absolute pressure) provides instantaneous pressure information to the electronic control unit (ECU) from the intake manifold – the amount of boost or vacuum in the intake manifold. This is necessary to calculate air density and determine the engine’s air mass flow rate or in other words engine load. Engine load is used as a reference for all base fuel and ignition maps. 4 Bar Motorsport MAP Sensor(includes HT-031001 - Male Deutsch DTM 3 Connector)

$149.00

Haltech 5 Bar "TI" MAP Sensor

A Haltech MAP sensor (manifold absolute pressure) provides instantaneous pressure information to ...

A Haltech MAP sensor (manifold absolute pressure) provides instantaneous pressure information to the electronic control unit (ECU) from the intake manifold – the amount of boost or vacuum in the intake manifold. This is necessary to calculate air density and determine the engine’s air mass flow rate or in other words engine load. Engine load is used as a reference for all base fuel and ignition maps. Haltech 5 Bar "TI" MAP Sensor (inc plug & pins) 1/8 NPT TI SENSORS MUST NOT BE MOUNTED DI...

$236.00

Haltech 7 Bar "TI" MAP Sensor

A Haltech MAP sensor (manifold absolute pressure) provides instantaneous pressure information to ...

A Haltech MAP sensor (manifold absolute pressure) provides instantaneous pressure information to the electronic control unit (ECU) from the intake manifold – the amount of boost or vacuum in the intake manifold. This is necessary to calculate air density and determine the engine’s air mass flow rate or in other words engine load. Engine load is used as a reference for all base fuel and ignition maps. Haltech 7 Bar "TI" MAP Sensor (inc plug & pins) 1/8 NPT TI SENSORS MUST NOT BE MOUNTED DI...

$236.00

Haltech Air Temp Sensor - 1/4 NPT Thread

Haltech Air Temp Sensor - 1/4 NPT Thread Air Temp Sensor - 1/4 NPT Thread (inc plug & pins) ...

Haltech Air Temp Sensor - 1/4 NPT Thread Air Temp Sensor - 1/4 NPT Thread (inc plug & pins) (127 C or 260 F MAX READING)

$37.00 $39.00