USD
  • USD
  • EUR
  • GBP
0

ECUs and Electronics

This collection will be dedicated to ECUs and Electronics for tuning.  Standalone brands (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other tuning solutions for Do-It-Yourselfers along with complimentary products that also fit into this category.

AEM 100 PSIg Fluid Stainless Sensor Kit

AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. The...

AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. They have a 3-wire mating connector with 12 in. leads for an easy plug-in installation. Kits are available for boost, exhaust gas temperature, nitrous oxide, brake pressure, inlet air temperature, or UEGO replacement gauges.AEM Electronics PSIG sensor kits are available in brass or stainless steel. Use brass sensors where you need a good reference to what pressure is being seen; e.g., reference/infor...

$150.00

AEM 150 PSIg Stainless Steel Sensor Kit

150 PSIg Stainless Steel Sensor Kit. Stainless Steel Sensor Body. 1/8" NPT Male Thread. Includes:...

150 PSIg Stainless Steel Sensor Kit. Stainless Steel Sensor Body. 1/8" NPT Male Thread. Includes: 150 PSIg Stainless Steel Sensor, Connector, Pins & 1/8" NPT to -4 Adapter. Sensor Performance Specifications: Accuracy: +/- 0.5% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity Operating Temp: -40C to 105C / -40F to 221F Burst Pressure: 1500PSI Response Time: < 1mS Wetted Materials: 304L & 316L Stainless Steel Vibration: 100 to 2000Hz, 20g Sinusoidal, 3 Ax...

$160.45

AEM Air Temp Sensor Kit 3/8 NPT

Air Inlet Temperature (AIT) Sensor Kit. 3/8"NPT. Includes: Air Temp Sensor, 3/8"NPT Aluminum Bung...

Air Inlet Temperature (AIT) Sensor Kit. 3/8"NPT. Includes: Air Temp Sensor, 3/8"NPT Aluminum Bung, Connector & Pins. Sensor Performance Specifications: Accuracy: < 1.5°C / 2.7°F Operating Temp: -40C to 135C / -40F to 275F Resistive Range (Ω): See Table Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil Sensor Body Material:...

$56.73

Hondata ECU Socket Tester

ECU Socket Tester   When preparing an ECU for S300/s200 (test s200 socketing using the supplied ...

ECU Socket Tester   When preparing an ECU for S300/s200 (test s200 socketing using the supplied pins) installation it is very easy to make mistakes. Lifted tracks and dry joints can be very difficult to spot. This tester takes out all the guesswork. Simply plug it in and all LEDs will light up when the pins have a good connection. If a LED is not on, then you have a soldering or wiring problem on the respective pin. A bad connection on pin #5 Note that the tester may not show an intermitte...

$50.00

Moates Demon ECU Pins

These are the pins that are specifically for use when installing a Moates Demon. These are the sa...

These are the pins that are specifically for use when installing a Moates Demon. These are the same pins that are included in the kit that comes with the Demon. If for some reason you lost or broke yours, these will work as a replacement. This item includes 28 pins, enough for one Demon installation.

$10.00

Xenocron 4 Bar MAP sensor (GM Style)

The PERFECT upgrade for those who already have the GM 3 bar and want to run more boost!!! Xenocro...

The PERFECT upgrade for those who already have the GM 3 bar and want to run more boost!!! Xenocron Tuning Solutions is pleased to introduce a new 4 bar MAP sensor with a GM-style case. The case and the clip for this sensor are the same as the very popular GM 3 bar. What this will allow you to do is put one of these new sensors in place of a GM 3 bar in order to run more boost (with proper tuning of course). If you do not already have the GM 3 bar, this sensor still is a very good choice for a...

$89.00

DIY - Swapbox K-Series Immobilizer Disable

This is the "Swapbox" K-Series Immobilizer Delete box designed for use when swapping a stock K-Se...

This is the "Swapbox" K-Series Immobilizer Delete box designed for use when swapping a stock K-Series motor into your vehicle. The unit has immo-bypass AND multiplexer error removed so it should run like a stock vehicle for you. The connections are easy and simple and instructions are included with the unit. These items are IN STOCK and shipping immediately! Please call with any questions! Swapbox-K comes with: Mobilizer Module, two splice terminals and two precrimped Contacts for the connect...

(5 variants)

AEM AQ-1 Data Logger

OVERVIEWAEM’s AQ-1 Data Logger is an easy-to-use vehicle data acquisition device designed for rac...

OVERVIEWAEM’s AQ-1 Data Logger is an easy-to-use vehicle data acquisition device designed for racers and performance enthusiasts of all types who want dynamic, accurate data logging capability, but don’t want to take a second job to pay for it. Any racer or enthusiast with a data logger - whether they compete professionally or every free weekend they have - will tell you how valuable this recorded information is for optimizing vehicle power and dynamics. When you combine this recorded data wi...

$374.82

Xenocron D.I.Y RWSS SENSOR ONLY

This is the Sensor ONLY to our very popular Rear Wheel Speed Sensor kits. This is to be used for ...

This is the Sensor ONLY to our very popular Rear Wheel Speed Sensor kits. This is to be used for the replacement of the original sensor.

$59.95

Dyno Tuning Intro Package

This is our popular DYNO TUNING INTRO Package which includes: Moates Ostrich Eprom Emulator Moa...

This is our popular DYNO TUNING INTRO Package which includes: Moates Ostrich Eprom Emulator Moates HULOG USB Datalogging Kit Moates BURN2 Eprom Chip Burner 10 Pack of SST Reburnable Eprom Chips This package gives a Dyno Shop or Casual Street Tuner all hardware items needed to start Tuning the popular OBD0/OBD1 Honda/Acura ECU Editors like Crome, eCtune, Uberdata, TurboEdit, BRE, Hondata, Neptune. Just provide a chipped ECU or install the tuning parts into your customers' chipped ECU and tu...

$324.00

D16Z6/D15b VTEC 1992-1995 (TD-42U)

TD-42U D16z6 / D15b-VTEC Engine These feature all new parts and there is no core required! They c...

TD-42U D16z6 / D15b-VTEC Engine These feature all new parts and there is no core required! They come complete with a cap and rotor, ready to install and run. High quality components ensure OEM reliability and performance. These distributors are an excellent value and perfect as OEM replacements.

$205.00

Accord 1992-1993 (TD52U)

OEM Part #: TD31U & TD58U * 1992 - Honda Accord 2.2L (External coil) * 1993 - Honda Accord 2....

OEM Part #: TD31U & TD58U * 1992 - Honda Accord 2.2L (External coil) * 1993 - Honda Accord 2.2L (External coil) This distributor uses an EXTERNAL coil, which is not included. These feature all new parts and there is no core required! They come complete with a cap and rotor, ready to install and run. High quality components ensure OEM reliability and performance. These distributors are an excellent value and perfect as OEM replacements or for OBD1 conversions.

$185.00

Accord 1990-1991 (TD31U)

OEM Part #: TD31U & TD58U * 90 - Honda Accord 2.2 L * 91 - Honda Accord 2.2 L This distributo...

OEM Part #: TD31U & TD58U * 90 - Honda Accord 2.2 L * 91 - Honda Accord 2.2 L This distributor uses an INTERNAL COIL. These feature all new parts and there is no core required! They come complete with a cap and rotor, ready to install and run. High quality components ensure OEM reliability and performance. These distributors are an excellent value and perfect as OEM replacements.

$175.00

Xenocron 3 Bar MAP Sensor Kit (GM)

Comes with new 3 bar map sensor, weatherpack pigtail connection with pins and directions for the ...

Comes with new 3 bar map sensor, weatherpack pigtail connection with pins and directions for the most common Honda wiring. This sensor allows you to run up to approximately ~29 psi of boost on Speed Density based engine management systems. The calibration of this map sensor is the same as a factory GM 3 Bar Sensor

$65.00

Demon 2 eProm Emulator and Datalogging Hardware

NEW AND IMPROVED IN STOCK AND READY TO SHIP! The Demon 2 is the newest in our line of Honda/Acura...

NEW AND IMPROVED IN STOCK AND READY TO SHIP! The Demon 2 is the newest in our line of Honda/Acura-friendly P28/P30/P72-compatible technology. Totally bumpless realtime emulation (real time tuning), embedded datalogging, auxiliary ports, 16x calibration storage. In-situ device, Demon 2 fits inside both USDM and the Demon 1in the JDM ECUs. Gives all the power of the Ostrich, Hulog, RTP, and other products into one. Full native compatibility with Crome, Neptune, TunerPro, and others. The Moates ...

(12 variants)

Race Spec Denso injector connector kit(ID2000)

Item Description Denso injector connector kit for ID2000 injectors Includes: 1 clip 2 pins 2 seals

Item Description Denso injector connector kit for ID2000 injectors Includes: 1 clip 2 pins 2 seals

$6.00