USD
  • USD
  • EUR
  • GBP
0

ECUs and Electronics

This collection will be dedicated to ECUs and Electronics for tuning.  Standalone brands (MoTeC, Haltech, Emtron), OBD1 modified Honda/Acura ECUs (Hondata, KTUNER, Neptune) and other tuning solutions for Do-It-Yourselfers along with complimentary products that also fit into this category.

Haltech IQ3 Race Logger Dash

Haltech IQ3 Race Logger *PRE-RELEASE PRE-ORDER ONLY*Requires additional CAN adaptor harness for p...

Haltech IQ3 Race Logger *PRE-RELEASE PRE-ORDER ONLY*Requires additional CAN adaptor harness for plug and play use with compatible ECUs or OBDII

$1,699.00

Haltech IQ3 Street Display Dash

Haltech IQ3 Street Display Dash Internal CAN interface compatible with over 20 aftermarket EFI sy...

Haltech IQ3 Street Display Dash Internal CAN interface compatible with over 20 aftermarket EFI systems (inc OBDII) in addition to Racepak V-Net and new direct wired sensor inputs. Direct inputs for the integrated Street functions, green indicators, blue high beam and red park brake/warning condition lights. Stand-alone friendly with cost effective configurable direct inputs for RPM, road speed, fuel level, oil pressure, oil and coolant temperature, display dimming. Requires additional CAN ada...

$849.00

Haltech IQ3 Street Logger Dash

Haltech IQ3 Street Logger Dash Internal CAN interface compatible with over 20 aftermarket EFI sys...

Haltech IQ3 Street Logger Dash Internal CAN interface compatible with over 20 aftermarket EFI systems (inc OBDII) in addition to Racepak V-Net and new direct wired sensor inputs. Direct inputs for the integrated Street functions, green indicators, blue high beam and red park brake/warning condition lights. Stand-alone friendly with cost effective configurable direct inputs for RPM, road speed, fuel level, oil pressure, oil and coolant temperature, display dimming. Requires additional CAN adap...

$1,399.00

CD-7 Non-Logging Digital Dash

AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that a...

AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and are sunlight-readable displays. And to ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-...

$1,299.00

AIM MXL2 Dash

MXL2 is the new AiM dashlogger providing all the info needed by professional racers as well as by...

MXL2 is the new AiM dashlogger providing all the info needed by professional racers as well as by newbies. The product has been designed with the aim to make configuration and usage smooth and easy either for amateurs and for people with sophisticated technical background. MXL2 acquires and displays data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 module included in the kit, analog/digital inputs and predefined math channels. Performance and data acqui...

$1,999.00

AIM MXS Strada Dash

MXS Strada is the evolution of MXL Strada, one of the most widely-spread dashes on tracks and str...

MXS Strada is the evolution of MXL Strada, one of the most widely-spread dashes on tracks and streets all over the world. MXS Strada is a 5" color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and - optionally - the GPS Module. Its data sampling capability can also be incremented adding up to eight expansion modules. MXS Strada is a high contrast TFT display: its visual qu...

$1,129.00

AIM MXS Strada Street Logger

MXS Strada is the evolution of MXL Strada, one of the most widely-spread dashes on tracks and str...

MXS Strada is the evolution of MXL Strada, one of the most widely-spread dashes on tracks and streets all over the world. MXS Strada is a 5" color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and - optionally - the GPS Module. Its data sampling capability can also be incremented adding up to eight expansion modules. MXS Strada is a high contrast TFT display: its visual qu...

$1,129.00

AIM MXS Dash

MXS is the dashlogger designed to acquire and display data coming from your ECU,...

MXS is the dashlogger designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 5" display has been specifically designed for small cockpits installation. ECU connection Analog/digital inputs ...

$2,299.00

Tunerview Demon Interface Module

This module is necessary if you want to use your Tunerview 2 with a Demon Board and originally or...

This module is necessary if you want to use your Tunerview 2 with a Demon Board and originally ordered it for another application. Note: An additional 4-pin header must be installed onto your Demon board for this module to function. Not needed with RD-1 display.

(3 variants)

Tunerview Hondata Interface Module

This module is necessary if you want to use your Tunerview 2 or RD-1 with an s300 or KPro and ori...

This module is necessary if you want to use your Tunerview 2 or RD-1 with an s300 or KPro and originally ordered it for another application. NOW WORKS WITH THE NEW V3 S300 and V4 Kpro BOARD

$70.00

Hondata KPRO w/ 6 Speed ECU and Tunerview RD2 Dash

This Package Includes: Hondata KPRO Installed in ECU Tunerview RD2 Dash with Cable   Honda...

This Package Includes: Hondata KPRO Installed in ECU Tunerview RD2 Dash with Cable   Hondata KPRO V4 The K-Series Programmable ECU (K-Pro) consists of a hardware modification to any K-Series ECU, plus Windows software which allows you to re-program the ECU and datalog sensors. The KPro4 is the 4th generation board made by Hondata, superseding all previous versions, with a more powerful processor, enhanced on board datalogging, faster upload and datalogging, live tuning and autotune, Bl...

$1,689.00

Hondata S300 w/ OBD1 ECU and Tunerview RD2

This package includes Hondata S300 V3 Installed into OBD1 ECU Tunerview RD2 Dash with Cable   H...

This package includes Hondata S300 V3 Installed into OBD1 ECU Tunerview RD2 Dash with Cable   Hondata S300 V3 The Hondata S300 version 3 is a plug in module to the OBD1 factory Honda Engine Computer (not included) which vastly expands the capabilities of the factory ECU. Forced induction, datalogging, real time programming, Bluetooth and engine protection are but a few of the comprehensive s300 features.   8 analog inputs.(datalogging only) 1 digital input. (datalogging only) Additional s...

$1,293.00

TunerView II LCD Regular Dash Kit

*** The new Demon 2 requires a different module than the original Demon. Please take note of whic...

*** The new Demon 2 requires a different module than the original Demon. Please take note of which unit you have before ordering this display to ensure you get the correct module***   Unit Includes The TunerView II, USB Cable, Data Cable, 4 Screws/nuts, and 2 Buttons (Only One Is Absolutely Necessary!) Features Bright, Easily Readable Display. Install It Anywhere In Your Dash, Cluster, Or Any Other Spot You Can Think Of. Presoldered Wires For Buttons Which Includes Quick Disconnects For Easy...

(6 variants)

TunerView II LCD Large Dash Kit

*** The new Demon 2 requires a different module than the original Demon. Please take note of whic...

*** The new Demon 2 requires a different module than the original Demon. Please take note of which unit you have before ordering this display to ensure you get the correct module***   Large Dash Unit Includes TunerView Dash Unit, USB Cable, Data Cable, 4 Screws/nuts, 2 Buttons (Only One Is Absolutely Necessary!) A Universal DIN mounting plate can be selected from the drop-down menu for an additional fee. Dash Unit Features Large, Bright, Easily Readable Display. Install It Anywhere In Your D...

(21 variants)

KTUNER FlashV2

The KTunerFlash V2 Unit is the new All-In-One solution from KTuner. The KTunerFlash V2 covers all...

The KTunerFlash V2 Unit is the new All-In-One solution from KTuner. The KTunerFlash V2 covers all KTunerFlash applications and is not vehicle specific! The KTunerFlash V2 features a 5″ touchscreen display that can show essential sensor data in real-time as a digital dash display. Though it’s meant as a handheld a simple Dual-T bracket can be added to allow mounting on a variety of inexpensive Dual-T mounts. Through a simple to use touch interface you can choose between different layouts, mult...

$649.00

KTuner V2 Replacement Cable

KTuner V2 Replacement OBD2 Cable

KTuner V2 Replacement OBD2 Cable

$12.00