USD
  • USD
  • EUR
  • GBP
0

Drivetrain/ Transmission

Clutches, Transmissions, Gear Sets, Limited Slip Differentials (LSD), Axles, Half Shafts, Hubs, Synchros, Replacement Parts and other accessories

Dyno Designs Tyrannosaur Tightener (B/D-Series)

The Tyrannosaur Tightener is a shift knuckle. It fits Honda linkage style transmissions (B and D ...

The Tyrannosaur Tightener is a shift knuckle. It fits Honda linkage style transmissions (B and D series NOW INCLUDING JDM Type R Linkages). It was designed to replace the factory Roll Pin or Bitch Pin, as it is more commonly referred to as. The factory Roll Pin received it's apt nickname for a good reason. It's a serious pain to remove and reinstall, but that's not its only flaw. The rubber bushings in the factory shift knuckle get old, rotten and brittle, creating slop in your shift linkage....

$124.99

K-Tuned Shifter Cable Trans Bracket

Application: RSX (All Models and Years), EP3 Civic, 2006-2011 Civic SI (K20Z3) with 2002-2006 RSX...

Application: RSX (All Models and Years), EP3 Civic, 2006-2011 Civic SI (K20Z3) with 2002-2006 RSX-S Shift Selector We have had the idea to make a nice replacement Shifter Cable Bracket for quite some time now. While we were developing our Billet RSX Shifter and our Race Shifter Cables, it made sense for us to work on a cable bracket at the same time. After testing a few prototypes of different materials, we couldn’t get the bracket to look the way we wanted. In the end, we decided to get it m...

$71.99 $79.99

Xenocron Braided Clutch Line Kit for B/D-Series

Xenocron Stock replacement Braided Clutch Line No Bells and Whistles here. Just a quality replace...

Xenocron Stock replacement Braided Clutch Line No Bells and Whistles here. Just a quality replacement for your factory clutch line for B-Series applications. Kit includes line and fittings

$59.00

Competition Clutch Stage 2 Clutch Kit

FREE SHIPPING within the Continental US on all Comp Clutches and Flywheels During this time, Inte...

FREE SHIPPING within the Continental US on all Comp Clutches and Flywheels During this time, International customers will need to contact us before placing their orders. Stage 2 - Street Series 2100 Clutch Kit This assembly provides approximately 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Carbon Kevlar material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. The...

(7 variants)

Competition Clutch Lightweight Flywheel

FREE SHIPPING within the Continental US on all Comp Clutches and Flywheels During this time, Inte...

FREE SHIPPING within the Continental US on all Comp Clutches and Flywheels During this time, International customers will need to contact us before placing their orders. The ST flywheel is recommended for naturally aspirated and/or street driven applications. This flywheel will work with ALL performance and stock clutch assemblies. Please choose your application from the available options on the drop-down menu above. Qualities of the CC Lightweight Steel Flywheel: Preserves low end torque...

(5 variants)

Wilwood Master Cylinder

Wilwood’s Compact Combination Master Cylinders have been designed for limited space applications ...

Wilwood’s Compact Combination Master Cylinders have been designed for limited space applications requiring the output capacity of a full size master cylinder. The ultra short 3.37”compact body provides 2.16” of additional clearance between the mounting flange and the fluid outlet. A full 1.12” of piston stroke meets or exceeds the stroke capacity of most full size cylinders. With 1/8” NPT fluid outlet port located at the top radius of the cylinder bore, reduces the chances for trapped air. En...

$83.95

Karcepts 36mm Swap Hubs (5-Lug)

Karcepts 36mm Swap Hubs provide the SOLUTION for upgrading to OEM Honda/Acura “36mm” axles in hig...

Karcepts 36mm Swap Hubs provide the SOLUTION for upgrading to OEM Honda/Acura “36mm” axles in high powered 97-01 Integra Type R.  Perfect for K-Swaps; but can also be used with high output B, D, F, H, and J-Swaps. Like breaking axles?  Level 1 Swap Axles just don't cut the mustard with a rating of only 200WHP.  Whose K-Swap doesn't make over 200WHP?!?  Level 2.9 Swap Axles are not much better of an alternative as they still utilize the smaller Civic/Integra/CRX axle spline and will run a good...

$295.00

Karcepts Delrin Knob (Black)

Karcepts Shift Knobs are meant for use with Honda/Acura vehicles and any other vehicle's shift le...

Karcepts Shift Knobs are meant for use with Honda/Acura vehicles and any other vehicle's shift lever that accepts an M10x1.5 thread pitch.  These knobs were designed to sit a little taller than OEM placement for ease of reach when banging through the gears. For those who want to feel their tranny syncros at work, go with this one as it is the lightest of the bunch at 105g/0.23 lbs.

$40.00

Hondata Strain Gauge Shift Knob Adapter

Adapts the Hondata Strain Gauge (M10-1.5 female threads) to work with a shift lever using 7/16-20...

Adapts the Hondata Strain Gauge (M10-1.5 female threads) to work with a shift lever using 7/16-20 male threads (Long Shifter)

$25.00

PPG B-Series 1-4 Turbo Dog Set

Description:This PPG B Series drag set includes 1-4 gears, mainshaft, output shaft, final drive, ...

Description:This PPG B Series drag set includes 1-4 gears, mainshaft, output shaft, final drive, cuff in place of 5th gear and a new innovative case brace which is designed to work with your stock or billet case. Standard Gear Ratios: 3.000 / 1.917 / 1.333 / 1.045 Horsepower Rating: 1000hp 

$6,500.00

Competition Clutch '04-'11 Subaru STi Stage 4 C...

Competition Clutch '04-'15 Subaru STI Stage 4 Strip 1620 Series Sprung Hub Clutch Kit 15030-1620T...

Competition Clutch '04-'15 Subaru STI Stage 4 Strip 1620 Series Sprung Hub Clutch Kit 15030-1620The Competition Clutch Stage 4 1620 assembly comes with a double spring, six rivet carriage and is specifically designed to make gear changes smooth in high horsepower applications.  Please be aware that this clutch will produce extremely high levels of noise, vibration and harshness. Intended for light street use only. The 1620 Series kit includes a performance pressure plate, a six puck high torq...

$685.00

Hasport 92-95 Civic K-Series Axles

Hasport entry level axles include a 12-month warranty and are meant for street cars with street t...

Hasport entry level axles include a 12-month warranty and are meant for street cars with street tires - NOT RACING. Only guaranteed to fit with Hasport mount kits. Features Requires use of an RSX length intermediate shaft (NOT Included) Only guaranteed to fit with Hasport mount kits 12 month warranty

$244.30

Hasport Clutch Master Cylinder Adapter

The Hasport clutch master cylinder adapter allows the use of a Honda-style or Wilwood hydraulic ...

The Hasport clutch master cylinder adapter allows the use of a Honda-style or Wilwood hydraulic clutch master cylinder adaptation to a cable transmission native equipped Civic/Integra vehicle and allows hydraulic transmission actuation. Vehicle Application: 88-91 Civic/CRX and 90-93 Integra

$99.00

Hasport 88-91 Civic/CRX B-Series Shift Linkage

NEW AND IMPROVED Hasport Gold Linkage features solid nylon bushings for improved shifter feel and...

NEW AND IMPROVED Hasport Gold Linkage features solid nylon bushings for improved shifter feel and greater durability along with a new yellow zinc coating to improve corrosion resistance.

$149.00

T1 Race B-Series Long Shifter Kit

The purpose of this shifter is to help prevent missed shifts. It has a spring inside that pushes ...

The purpose of this shifter is to help prevent missed shifts. It has a spring inside that pushes the shift lever towards the 5/R gate. In order to get into the 5/R gate, you have to push down and over on the shifter. This helps prevent shifting from 2nd to 5th, but allows you to push all the way to the right on the 2-3 shift to minimize the chance of shifting back into 1st from 2nd. The 1-2-1 shift generally does a lot of damage!The kits we've put together allow as bolt in of an installation ...

$1,395.00

Hondata Strain Gauge

The Hondata Strain Gauge is a gearshift mounted strain gauge and remote strain gauge amplifier wh...

The Hondata Strain Gauge is a gearshift mounted strain gauge and remote strain gauge amplifier which signals the ECU to cut the engine when the gear lever is moved. This enables very quick no lift shifts with dog engagement transmissions. The Strain Gauge works by using a strain elements in the gear shift knob to measure the force on the knob, via accurately measuring the strain on an aluminum insert between the gear lever and gear knob. The aluminum insert has two bonded Omega® strain gauges...

$595.00