USD
  • USD
  • EUR
  • GBP
0

Chipping

Chipping Kit w/ SST Chip (OBD1 ECUs)

H O N D A / A C U R A OBD0 or OBD1 ECU Chipping Kit w/ SST Eprom (eCtune / Crome / Uberdata / N...

H O N D A / A C U R A OBD0 or OBD1 ECU Chipping Kit w/ SST Eprom (eCtune / Crome / Uberdata / Neptune / Hondata / TurboEdit / BRE) This is my standard ECU chipping kit that will come with everything you need to chip your own OBD0 or OBD1 Honda/Acura USDM ECU. Instructions are located in the 'Tech Center' section of the site. ***OUR KITS NO LONGER CONTAIN COMPONENTS C51 & C52, AS THEY ARE NOT REQUIRED*** USDM Kit Includes - 28 pin machined DIP Socket - 28 pin Aries ZIF Socket - 4 pin ...

(12 variants)

Chipping Kit w/ SST Chip 5 pack

This is for a 5 pack of our OBD1 Honda/Acura ecu chip kits at an unbelievably low price. The indi...

This is for a 5 pack of our OBD1 Honda/Acura ecu chip kits at an unbelievably low price. The individual price is normally $19.95 each, as a part of this 5 pack each kit is $15. ***OUR KITS NO LONGER CONTAIN COMPONENTS C51 & C52*** You can select either USDM or JDM from the drop-down menu (all 5 kits will be one or the other, you cannot mix and match).

$85.00

Neptune RTP Basic Chipping Kit w/ SST Chip (OB...

Neptune RTP Chip Kit OBD1 ECU Basic Chipping Kit This is my basic chipping kit that will come wi...

Neptune RTP Chip Kit OBD1 ECU Basic Chipping Kit This is my basic chipping kit that will come with only the essential components you need to chip your OBD1 Honda/Acura USDM ECU for Neptune RTP. Kit Includes - 28 pin machined DIP Socket - 4 pin CN Datalogging Header - 1k resistor - 74 HC373 chip - SST 27SF512 Eprom chip

(2 variants)

Hondata S300 Chipping Kit

This is a chipping kit designed for Hondata S300 Boards Only Includes - 32 pin machined header - ...

This is a chipping kit designed for Hondata S300 Boards Only Includes - 32 pin machined header - 0.1µf ceramic disc capacitors (qty 2) - 1k resistor - 74 HC373 chip NO JDM OPTION

$15.00

PWM Boost ECU Components for OBD1 Hondata S300 ...

Add PWM Boost Control to your OBD1 Honda ECU using the factory EGR Circuit This kit will work for...

Add PWM Boost Control to your OBD1 Honda ECU using the factory EGR Circuit This kit will work for Hondata S300 or Neptune PWM boost control as well using the "EGR" Pin A11 setting. Add either our Xenocron 3 Port or 4 Port PWM Solenoid Kit to your order and use your Honda OBD1 ECU to control boost!

$10.00

Eprom Chip - SST (27SF512) Chip (Single)

SST Reburnable Eprom. This chip is reburnable 1000+ times and compatible with the most popular ch...

SST Reburnable Eprom. This chip is reburnable 1000+ times and compatible with the most popular chip burners used (BURN1 and 2, Willem, Pocket Programmer). These chips can be used with the 2Timer to store and switch between two different programs as well. Make sure you know if your eprom programmer is compatible with these chips (SST27SF512)

$7.50

Eprom Chip - SST (27SF512) Chips (5 pack)

This is a (5) pack of the popular SST Reburnable Eprom Chips.

This is a (5) pack of the popular SST Reburnable Eprom Chips.

$37.50

Eprom Chip - SST (27SF512) Chip (10 pack)

This is a (10) pack of the popular SST Reburnable Eprom Chips.

This is a (10) pack of the popular SST Reburnable Eprom Chips.

$70.00

Xenocron C14 (Main Board Capacitor)

This is a replacement capacitor for the spot labeled C14 on OBD1 Honda/Acura ECUs. We replace the...

This is a replacement capacitor for the spot labeled C14 on OBD1 Honda/Acura ECUs. We replace these as a preventative measure on every ECU we chip as over time they tend to go bad. If you purchased an ecu chipping kit elsewhere that did not include a new main board capacitor, this is for you!

$3.00

Xenocron Q31 Transistor

Transistor for Honda ECU spots labeled Q34 or Q31 Q31 is the transistor that commonly blows up wh...

Transistor for Honda ECU spots labeled Q34 or Q31 Q31 is the transistor that commonly blows up when someone plugs the Purge Control Solenoid plug into the IAT sensor.

$2.00

Xenocron Q101 Transistor

Transistor for Honda ECU spots labeled Q101 or Q17...from our various VTEC Conversion Kits

Transistor for Honda ECU spots labeled Q101 or Q17...from our various VTEC Conversion Kits

$2.00

Xenocron Q26 Transistor

Transistor for Honda ECU spots labeled Q26 or Q30...from our various VTEC Conversion Kits

Transistor for Honda ECU spots labeled Q26 or Q30...from our various VTEC Conversion Kits

$2.00

Xenocron R54 Resistor

1k Ohm Resistor for spot R54 on the Honda ECUs

1k Ohm Resistor for spot R54 on the Honda ECUs

$1.00

HC373 Thru-Hole Latch

20 Pin Thru Hole Latch for OBD1 Honda ECUs

20 Pin Thru Hole Latch for OBD1 Honda ECUs

(2 variants)

Aries ZIF Socket

28 Pin Zero Insertion Force socket (Makes for easy chip changes) Designed to be carefully press...

28 Pin Zero Insertion Force socket (Makes for easy chip changes) Designed to be carefully pressed into the 28 Pin DIP Socket that is soldered into your ECU.

$9.00

Xenocron DIP Socket

28 Pin Machined DIP Socket.

28 Pin Machined DIP Socket.

(2 variants)