USD
  • USD
  • EUR
  • GBP
0

Products

14mm Adaptor Top for Injector Dynamics Injectors

These adapters are to adapt the newer generation injectors which are 48mm in length to the older ...

These adapters are to adapt the newer generation injectors which are 48mm in length to the older style 60mm long injector. These adapt to a 14mm o-ring fuel rail. Pricing is per INDIVIDUAL ADAPTER TOP. A 7 micron filter element and viton o-ring are included.   ***FOR FULL SET PURCHASE 4 ADAPTER TOPS***

$12.00

4 Pin Tunerview Cable

This is a replacement 4-pin cable for the Tunerview 2 and RD-1. The cable is roughly 48" end to e...

This is a replacement 4-pin cable for the Tunerview 2 and RD-1. The cable is roughly 48" end to end, and is straight-through. Please check www.hrtuning.com for the proper wire/pin orientation for your application.

$8.00

4 Wire Hulog Cable

This is a replacement 4 wire cable for the Moates Hulog.

This is a replacement 4 wire cable for the Moates Hulog.

$5.00

4130 Fab B-series Coil Plate

Xenocron Tuning is proud to offer a coil retention solution for those of you looking to run indiv...

Xenocron Tuning is proud to offer a coil retention solution for those of you looking to run individual coils on your B-series VTEC motors. This aluminum plate is made to hold K-series coils securely in place and looks great at the same time. No more ugly brackets or jamming the coils under your stock plug wire cover. Made by 4130 Custom Fabrication. Comes with all necessary hardware, coils not included. This plate was specifically designed to run with RSX coils, part # 30520-PNA-007/30520-RR...

$65.00

4130 Fab Dash Mount V2

4130 Fabrication Dash Mount for AIM, MoTeC and RACEPAK dashes Applications: 92-95 Honda Civic and...

4130 Fabrication Dash Mount for AIM, MoTeC and RACEPAK dashes Applications: 92-95 Honda Civic and 94-2001 Acura Integra This mount will bolt to the factory turn signal switch mounts on your factory steering column. The mount also moves the dash in front of the steering wheel and right in your line of sight. Recommended for OFF-ROAD USE ONLY as this will replace your turn signal and headlight switches!!

$79.99

4Piston B-Series Ported Oil Pump

The stock oil pump is a great piece for up to 9,000 rpm in drag racing and 8,000 rpm in endurance...

The stock oil pump is a great piece for up to 9,000 rpm in drag racing and 8,000 rpm in endurance racing. Past that, there can be cavitation issues and oil pressure drops as temperatures rise. Our ported pump increases flow by 25% and will allow continuous use above 9,000 rpm. The pump has been tested as high as 12,000 rpm with great success. We start with a brand new OEM oil pump from Honda, disassemble, port and smooth oil passages to increase flow. The pumps are then cleaned, oiled, reasse...

$349.99

4Piston H22 Ported Oil Pump

The stock oil pump is one of the weak links in your H22 engine. These pumps cavitate and lose pre...

The stock oil pump is one of the weak links in your H22 engine. These pumps cavitate and lose pressure at high rpm and especially when oil temperatures rise in endurance applications. Our ported pump increases flow and eliminates cavitation to resolve these shortcomings. We start with a brand new OEM oil pump from Honda, disassemble, port and smooth oil passages to increase flow. The pumps are then cleaned, oiled, reassembled and repackaged. This part is cheap insurance to protect your multi-...

$385.00

4Piston K20 / K24 Ported Type S Oil Pump

The stock K20 oil pump is a great piece for up to 9,000 rpm continuous duty. Past that, there can...

The stock K20 oil pump is a great piece for up to 9,000 rpm continuous duty. Past that, there can be cavitation issues. Our ported pump will allow continuous use above 9,000 rpm, and we have run the pump as high as 11,300 rpm with great success. We start with a brand new OEM oil pump from Honda, disassemble and port and notch for K24 fitment. The pump is then cleaned, oiled, and reassembled. FITS K20 and K24 Engines! IN STOCK

$299.99