Here is the K-Tuned Upper Coolant Housing. With applications for both K20 and K24 engines, these housings will provide several unique advantages over the stock units. The hose outlet on the K-Tuned housing pivots slightly, allowing approximately 15 degrees of angle adjustment. This is helpful when compared to the fixed the factory outlet that always seems to put the upper rad hose in the path of the intake piping. This housing features a 1.25” rad hose outlet for use with regular rubber or silicone rad hoses .
K-Tuned has also designed a Filler Neck that relocates the radiator cap to a higher point on the engine itself. The new location is the highest point of the cooling system and allows air pockets to easily escape during the coolant bleeding process. The optional Filler Neck was designed for use with an OEM 92-00 Honda Civic radiator cap. This part will be very helpful on an engine that already has a bad reputation for coolant bleeding.
The K-Tuned Upper Coolant Housing will compliment their Swivel Neck Thermostat and Water Pump Block off Plate. All of these parts allow plenty of options for custom and race engine cooling setups.
Applications: K20A, K20A2, K20A3, K20Z1 cylinder heads