KAIZENSPEED Front Drag Brakes and Rear Trailing Arm Kit with Staging Brake Savings Package!!
Front Drag Brakes
Record setting cars require weight savings in every corner of the car. This allows you to redistribute weight further forward or to the proper corner when corner-scaling your race car.
Our Front Drag Brakes save 22 pounds! They're a complete bolt-on kit for 92-00 Civic and 94-2001 Integra. They fit 13" wheels such as Belaks.
CALIPERS DO NOT DRAG LIKE ANOTHER KIT ON THE MARKET.
Our Front Drag Brakes are a complete kit, ready for installation out of the box, including:
Lightweight aluminum Calipers and brake pads
Stainless brake lines with fittings
All bolts are also included
*Requires spindles that use a 10.31" rotor (92-95 Civic EX or SI with ABS, 96-2000 EX or EM1 with ABS)
Rear Trailing Arms with Staging Brakes
We’re proud to announce the release of our newest product for Honda drag racers: The Rear Trailing Arm with Staging Brakes kit. This kit serves to reduce weight in the most important area of a race car while maintaining the use of your OEM shock and lower control arm. It features an adjustable wheelbase with a design optimized for lowered cars. This is the necessary next step for FWD Honda Drag Racers. It completely replaces the entire rear trailing arm assembly for 94-00 Integra, and 92-00 Civic and allows for an extended wheelbase up to two inches while reducing weight by over 50 pounds!
50 lbs lighter than stock
Extends the wheelbase up to 2” (adjustable)
Maintains the use of OEM shock and lower control arm.
Toe adjustment and camber adjustment built-in
Lightweight steel rotors less than .200” thick
Rear speed sensor enabled
Available in 5 lug
Made entirely from Chromoly and aluminum for the best strength/weight ratio
Each kit includes: A set of rear trailing arms with lightweight spindle, lightweight brake rotors, brake calipers, brake pads, stainless brake lines, toe adjuster, camber adjuster, and all necessary hardware! Ready to bolt on.
Performance and Racing parts disclaimer:
This product is for OFFROAD USE ONLY!
It is 100% your responsibility as the installer or user to ensure that the functionality of this product is satisfactory for the application.
IMPROPER USE MAY LEAD TO ACCIDENTS RESULTING IN PROPERTY DAMAGE, SERIOUS INJURY OR DEATH. IF YOU ARE NOT QUALIFIED TO MAKE A DETERMINATION REGARDING THE SUITABILITY OF A COMPONENT, SEEK THE ADVICE OF A COMPETENT ENGINEER. If you cannot be certain that the component sold by KAIZENSPEED LLC is suitable for your intended application, you may return it in new condition, and in the original packaging, for a complete refund. Because the end user makes the sole determination of suitability for its application, KAIZENSPEED LLC, makes no recommendation or warranty, express or implied, as to merchantability, suitability for any purpose or longevity or safety. BECAUSE THE RACING ENVIRONMENT OFTEN EXPOSES VEHICLES TO STRESSES WHICH ARE NOT FORESEEABLE AND WHICH CAN EXCEED THE ABILITY OF ANY COMPONENT TO SURVIVE, THE END USER ASSUMES ALL RISK OF PROPERTY DAMAGE, INJURY OR DEATH WHICH MIGHT RESULT EVEN IF COMPONENTS ARE INSTALLED IN COMPLIANCE WITH ALL SPECIFICATIONS.
All performance or racing components must be inspected regularly for wear. It’s a good habit to inspect all components regularly, especially critical components such as brakes, tires, and suspension. Often times a catastrophic problem can be avoided by thorough attention to detail.