USB Nokia Cable Instructions


Solder the white 4 pin header into spots 1-4 on your ECU in the spot labeled CN2.  The cable is already pinned correctly and should plug onto the white 4 pin header once it is installed into your ECU.


This is how the wires are connected to your ECU.  It is pinned correctly as is.


Nokia Cable

       ECU SIDE


       CN2 plug



          Black = Ground 


      PIN 1 (GND)

          Green = Receive


      PIN 2 (TX)



      PIN 3 (+5v)

          White = Transmit


      PIN 4 (RX)


      PIN 5 NOT USED


Nick of ECUControl has a good write-up as well. Please refer to it if you need further assistance.


A donation from the sale of this cable will go to Nick of ECUControl.


Thank you for your order!