DM-6 Wideband/Air Fuel Sensor Module Combo
Description:
The PLX Air Fuel Ratio Sensor Module accurately measures the precise air fuel ratio (AFR) of any internal combustion engine. Up to 16 Sensor Modules can be daisy chained together from the PLX iMFD line for modular tuning. This Sensor Module can also be used as a stand alone unit capable of interfacing with third party hardware through the analog outputs. The SM-AFR works with gasoline, biodiesel, ethanol, methanol, E85, LPG, and CNG. Advanced soft start technology prolongs the O2 sensor life.
The DM-6 Multi Gauge Display Module is an OLED automotive gauge designed to display the measured values from your PLX Sensor Modules. Measuring only 0.7" (18 mm) thin, it can be mounted virtually anywhere. The DM-6 Multi Gauge is designed to fit into most aftermarket 2 1/16" (52 mm) cups, and can be mounted for seamless integration into your vehicle. Utilizing new touch screen sense technology, buttons are a thing of the past. Navigate your gauge and menus with ease by touching the bezel of the gauge. An ideal accessory for your PLX Sensor Modules. Connect to a Multi Gauge with OBD II for even more information than any standard gauge.
SM-AFR Tech Specs:
Physical Dimensions: 2 x 2.875 x 1.125" (52 x 75 x 28mm) L x W x H
Technology: PLX Critical Response Technology
Fast Response PID
Accuracy: < 0.1AFR (Gasoline) Wideband
< 0.2AFR (Gasoline) Narrowband
Measurement Range: 10-20 AFR (Gasoline)
0.68 - 1.36 lambda (Gasoline)
Analog Outputs: Wideband Linear 0-5V,
Narrowband 0-1V (Driving Current 20mA)
Operating Voltage: 9V - 20V
Power Consumption: 20 Watts (Max), 13 Watts (Typical)
Power Supply Technology: High Efficiency Switching with Soft Start Technology
Operating Temp:0 - 85 Degrees Celsius
Enclosure: Extruded Aluminum
DM-6 Tech Specs:
Physical Dimensions:Standard 2 1/16 x 0.7" (52 X 18 mm)
Display Technology:1.10" OLED Screen (124 x 36 pixels)
LED (16 Green, Yellow, Red)
Viewing Angle:180 Degrees
Polarization:None
Supply Voltage: 3.3V and 8V from SM Module
Supported Units:US Standard, Metric
Included Items:
• SM-AFR main unit
• Bosch LSU 4.2 wideband sensor
• O2 sensor harness 10ft
• 4ft power wire with 2.1mm connector
• 4ft Analog wires and connector with 4 terminals
• 1ft Serial Cable
• Termination jumper
• DM-6 2 1/16" (52 mm) Gauge
• 4 Pin connector for SM-AFR connectivity
• 2 Terminals for 4 pin Connector
• 3 Wire 8 V. Power Converter
• 3.5 mm Y Splitter
• 6" M/F Extension Serial Cable
• User Manual
|