This is my standard ECU chipping kit that will come with everything you need to chip your own OBD0 or OBD1 Honda/Acura USDM ECU. Instructions are located in the 'Tech Center' section of the site.


USDM Kit Includes
- 28 pin machined DIP Socket
- 28 pin Aries ZIF Socket
- 4 pin CN Datalogging Header
- 0.1µf ceramic disc capacitors (qty 2)
- 1k resistor
- 74 HC373 chip
- Jumper for J1
- SST chip (27SF512) reburnable Eprom

JDM version Includes
- 28 pin machined DIP Socket
- 28 pin Aries ZIF Socket
- 4 pin CN Datalogging Header
- Optional Surface Mount filtering capacitors
- 1.2k resistor (auto/manual conversion)
- Surface Mount 74HC373 chip
- SST chip (27SF512) reburnable Eprom

***As of Dec 1st, 2007...We will NOW be including the main ECU board electrolytic capacitor as a standard item in our OBD1 ECU chipping kits. It is highly recommended that you replace this item in the ECU's you chip these days!

If you choose to add-on a custom basemap option for $14, PLEASE make sure you include the following information in your order or it will delay shipping.

• Engine being used
• Map Sensor being used
• Injector Brand & Size being used
• Turbo or Naturally Aspirated
• Any other modifications to the setup we should know about