PHP Advanced Transfer Manager

11psi-FooK.bin This is my tune from my 15g setup on a D15B VTEC, 450CC Injectors

FooK

2.5tune9final.bin *2.5 bar MAP* D16Y8, RC 550cc hi-Z, misc T04E compressor, fuel gets wierd above 10-11 psi as it was running out of fuel pump.

Joseph Davis

327stock-P28auto.bin File 327, Stock P28 AUTO

xenocron

450cc-14b-crome-p28-19deg-v3dl d16z6/Hf Mani/14b turbo/450cc/p28/streetwidebandbasemap/jrc 8 inch/2.5" DP/2.5" charge pipes

FooK

B7 map with 7000 limit aggress D15B7/D16A6 tuned on crome aggressive timing great low/mid/topend pull

xtrm4

Corr Performance TUNE d16y7.bi Tuned to 22psi 93 octane pump d16y7 built bottem end 9:1 pistons stock head 750cc injectors. 57trim t3/t4oe.. 280whp 250wtq

pullig

Minimet25450.bin Mini-me Y7 block and Z6 head, 450cc, t25, 10psi great street tune

quicksol95

RSmotors tune ZC.bin dohc ZC dyno tuned up to 11.5 psi 208hp/171trq .48/.60 T-bird 450's motorola 2.5

doubleA

Stevefinal.bin D16Z6 , RC 440 , Stock Map , Jackson SC @ 6psi . Gets 30mpg

SPLDan

Tuned-D16y7.bin D16y7 tune. 240cc injectors. Everything stock on vehicle. Good base tune for 'y7 and gas milage

Speed Phreak

bang-bin3-450cc-z6.bin basemap only stock z6, 42/48 t3, 450cc, p28, 4500vtec, 7400 redline, rtp ready

FooK

d16z657trim450.bin Stock D16z6 10psi t3/t4 57 trim 450

quicksol95

d16z6RSmotors7psi14b.BIN d16z6 y7mani 14b 450cc 2.5" turbo back 7psi 179whp tuned

7808

dietz_2.5bar_750cc_race.bin here is my .bin for cromepro...setup is this sohc, stock z6 head, y8 block, eagles, vitaras, 2.5bar map, 750cc, t3/t4 57 trim, 25psi 405whp, 315tq. vtec at 4800, redline at 7800, ftl at 6200

xenocron

edsohc450cc.bin p28; y8; t3/t4;50ar; 10psi, 2.5"dp; fpr@50psi; walbro255, dsm450cc

torpedo-R

final-notes.bin Y7 Head, Z1 block, T3 .42/.48, Greddy FMIC, HF mani, 13psi, Z6 IM

xenocron

haroon3.bin d16y7, t3-60trim, 3"dp and exhaust. base timing 12*. dsm 450's, po6,7200 limit,3700 ftl. running 9psi no sign of detonation. not fine tuned at all, just a starting base.

y7turbo

jaredbase.bin Chrome Basemap - 450cc Injectors, DSM t25, D16z6, 6-8lbs Boost. 3000rpm Launch Limit. Stock Rev limiter. Use at own risk

Stinky

jeffsBoostbin.bin D16Y8 with a .48/.60 T3 turbo at 10 psi, DSM 450cc injectors should be getting it dynoed soon so i will port the numbers also

jeffsciv23

jeffsciv23.bin updated d16y8, dsm 450's, .48/.60 T3, 10 psi. adjusted the timing so it is more like the stock y8 and smoothed out part throttle.

jeffsciv23

steve stock MAP final3.bin D16Y8, RC550cc, .50-.57 or somesuch T3/T04E, stock MAP sensor. Pay attention to high cam ignition at 10 psi. Low cam ignition is too retarded under boost, and the rest of the ignition map needs a good kicking.

Joseph Davis